Nedis SAMP41148ME Manual

Nedis Modtager SAMP41148ME

Læs nedenfor 📖 manual på dansk for Nedis SAMP41148ME (1 sider) i kategorien Modtager. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
5.0V 1.0 A, 5.0 W
NL-5215MC 28
Made in China
Bat ch: 013984/XXXXXXXXXX
POWER IN
CATV Amplier
SAMP41148ME
Features
●
●
●
●
●
5-65MHz, 85-1218MHz two way frequency range
For use with cable TV
Simple to install
LED power on indicator
Connections for up to four devices
Part list
Amplifier
AC/DC adapter
Wood screws x 2
Quick setup guide
Connecting the amplifier
Specifications
Installation methods
18.5 mm
6.8 mm
2.0 m max.
(79”)
Wall
Product
Wood screws
86 mm
Bi-directional CATV Amplifier
SAMP41148ME
Cable modem
TV
Coaxial
Cable
Adapter
Safety
1. Connect a coaxial cable to the INPUT jack on the amplifier
and to the cable TV.
2. Connect a coaxial cable to the OUT 1 jack on the amplifier
and to the CATV IN jack on the back of the TV, or cable
modem.
3. Connect the AC/AD adapter to the POWER IN jack and to a
power outlet. When the amplifer is connected to a power
outlet, the POWER IN indicator lights.
NOTE: You can also connect devices to the OUT2, OUT3, and
OUT4 jacks.
Unused outputs must be terminated with a 75 ohm
terminating resistor.
This bi-directional CATV amplifier is designed to work with cable systems that have pay-per-view, digital cable,
or cable modems.
Fre encyqu
Gain
Return path
Return loss
Noise figure
Output level
Impedance
Connector
Output
Power adapter
Dimensions
5-65MHz
n.a.
-7.5dB typ.
15dB typ.
n.a.
n.a.
85-1 MHz218
9dB
15dB typ.
5.5dB
105dBµV
n.a.
75 ohm
F Female
4 connectors
100-240V 50-60Hz / 5.0V 1.0A, 5.0W ~
94 x 69 x 22 (mm)
• Indoor wall mount: Mount two wood screws with center
distance 86mm (3.39") into the wall.
• The wood screws is suitable for mounting at height 2.0m
max. (79")
• Refer to the illustration to install the device correctly.
To reduce risk of shock, this product should only be opened by
an authorized technician when service is required.
Disconnect the product from the mains and other equipment if a
problem should occur.
Read the manual carefully before use. Keep the manual for
future reference.
Only use the device for its intended purposes. Do not use the
device for other purposes than described in the manual.
Do not use the device if any part is damaged or defective.If the
device is damaged or defective, replace the device
immediately.
The device is suitable for indoor use only. Do not use the
device outdoors.
Do not expose the product to water or moisture. Only use the
supplied power adapter.
Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain readily
operable.
●
●
●
●
●
●
●
●
2
3
4
1

Produkt Specifikationer

Mærke: Nedis
Kategori: Modtager
Model: SAMP41148ME

Har du brug for hjælp?

Hvis du har brug for hjælp til Nedis SAMP41148ME stil et spørgsmål nedenfor, og andre brugere vil svare dig


Modtager Nedis Manualer

Nedis

Nedis SAMP41148ME Manual

3 August 2024
Nedis

Nedis DVBT2265BK Manual

28 Juli 2024
Nedis

Nedis SAMP40025WT Manual

25 Juli 2024
Nedis

Nedis MPWL631BK Manual

20 Juli 2024
Nedis

Nedis SAMP40040WT Manual

6 August 2023
Nedis

Nedis SAMP100WT Manual

15 December 2022
Nedis

Nedis AAMP16110BK Manual

26 Oktober 2022

Modtager Manualer

Nyeste Modtager Manualer

Henry Engineering

Henry Engineering AES DIGITAL DA 2X4 Manual

21 November 2024
QSC

QSC PowerLight 9.0 Manual

20 November 2024
Ashly

Ashly FX-125.4 Manual

20 November 2024
JBL

JBL Grand Touring GTO-501EZ Manual

20 November 2024
Harman Kardon

Harman Kardon CA5250 Manual

19 November 2024
Esoteric

Esoteric F-05 Manual

19 November 2024
Konig & Meyer

Konig & Meyer 28075 Manual

18 November 2024
IFi Audio

IFi Audio ZEN CAN 3 Manual

18 November 2024
JBL

JBL Marine MA6002 Manual

18 November 2024
Infinity

Infinity Kappa One Manual

18 November 2024