Nedis WIFICI10CWT Manual

Nedis Overvågningskamera WIFICI10CWT

Læs nedenfor 📖 manual på dansk for Nedis WIFICI10CWT (8 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 42 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/8

Full manual Nedis SmartLife ™

Download the app: Nedis SmartLife from Apple App store or Google Play Store.

Create account

Select country code and enter full naonal phone number or email address and then

request vericaon code.

Enter received vericaon code and pick your own password.

Add device

1. Tap “+” on the top right corner. A list of potenal products appears.

2. Select the device type you want to add from the list

3. Acvate the device to be added by plugging it in or connecng the baer y.

4. Make sure the indicaon LED (or the lighng device) ashes quickly (as shown in example in the

applicaon) and tap the buon to conrm.

If the light is not ashing quickly hold the reset buon (or switch the bulb o and on for 3 mes) unl

it ashes.

5. Conrm your phone is connected to the Wi-Fi network to which the device will be added, enter the

Wi-Fi password and conrm.

6. Now the device will be searched, make sure your phone and the device are close to the router to

opmize recepon.

7. Aer the product is found and added, rename it so you can easily recognize it.

If above method fails (this can be due to unstable network or specic network protecon) add the device using

AP mode by following the steps below.

Add device (AP mode)

1. Tap “+” on the top right corner. A list of potenal products appears.

2. Select the device type you want to add from the list

3. Hold the reset buon (or switch the bulb o and on for 3 mes) unl the indicaon LED (or lighng

device) ashes (as shown in example) SLOWLY

If the light is ashing quickly, reset again by holding the reset buon for about 5 seconds or switching

the light o and on 3 mes.

4. Conrm the Wi-Fi network to which the device will be added, enter the Wi-Fi password and conrm.

5. Connect -Fi hotspot (SmartLife_xxxx) your phone to the device’s Wi

6. If asked: conrm to stay connected to Wi-Fi network without internet access

7. Go back to the Nedis SmartLife applicaon to connue installaon.

8. Now the device is sent the instrucons to connect to your exisng Wi-Fi network, make sure your

phone and the device are close to the router to opmize recepon.

9. Aer the product is found and added, rename it so you can easily recognize it.

Produkt Specifikationer

Mærke:	Nedis
Kategori:	Overvågningskamera
Model:	WIFICI10CWT
Type:	IP-sikkerhedskamera
Produktfarve:	Black, White
Pakkevægt:	207 g
Pakkedybde:	225 mm
Pakkebredde:	95 mm
Pakkehøjde:	43 mm
Kompatible hukommelseskort:	MicroSD (TransFlash)
Wi-Fi:	Ja
Bluetooth:	Ingen
USB-port:	Ja
Understøttede videotilstande:	720p
Indbyggede højttaler(e):	Ja
Ethernet LAN:	Ingen
Driftstemperatur (T-T):	0 - 50 °C
Maksimal opløsning:	1280 x 720 pixel
Husmateriale:	Plast
Hurtig start guide:	Ja
Kabler inkluderet:	USB
Pakketype:	Kasse
Understøttede grafikopløsninger:	1280 x 720 (HD 720)
Forbindelsesteknologi:	Trådløs
Strømkilde type:	DC, USB
AC-adapter inkluderet:	Ja
Monteringstype:	Bord/Væg
Indbygget kortlæser:	Ja
Indbygget HDD:	Ingen
Understøttet placering:	Indendørs
Understøttede mobile operativsystemer:	Android, iOS
Indbygget mikrofon:	Ja
Frekvensbånd:	2.4 - 2.483 GHz
Sensortype:	CMOS
Samlet antal megapixels:	1 MP
Lydsystem:	2-vejs
Grænseflade:	WLAN
Maksimal størrelse på hukommelseskort:	128 GB
Antenne type:	Intern
Plug and play:	Ja
USB oplader inkluderet:	Ja
Dag/nat funktion:	Ja
Minimumsbelysning:	- Lux
Antal sensorer:	1
Optisk sensorstørrelse:	1/4 "
Fast brændvidde:	2.5 mm
Nattesyn:	Ja
LED type:	IR
DC udgangsspænding:	5
Antal kameraer:	1
Synsfelt vinkel (FOV):	110 °
Monteringssæt:	Ja
Infrarød bølgelængde:	850 nm
Strømstiktype:	Type C
Antal linser:	1
Antal lysende LED:	1
Niveau for antennestyrke (maks.):	3 dBi
Nattesyn, afstand:	10 m
Temperaturføler:	Ja
Termisk modul:	Ja
Audiosporing:	Ja