Ninja SS351 Manual

Ninja Blender SS351

Læs nedenfor 📖 manual på dansk for Ninja SS351 (35 sider) i kategorien Blender. Denne guide var nyttig for 55 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/35

SS351

Series • Série • Series

OWNER’S GUIDE

GUIDE DE L’UTILISATEUR

GUÍA DEL USUARIO

FOODI® POWER BLENDER

& PROCESSOR SYSTEM

with Smoothie Bowl Maker

and Nutrient Extractor*

MÉLANGEUR TURBO ET

ROBOT CULINAIRE FOODI®

avec créateur de bol de boisson frappée

et extracteur de nutriments

SISTEMA ELÉCTRICO DE

PROCESAMIENTO Y LICUADO FOODI®

con tazón para preparación de

batidos y vaso para extracción

de nutrientes*

* Extraction d’une boisson contenant des vitamines

et des nutriments à partir de fruits et de légumes.

* Extrae una bebida, que contiene vitaminas y

minerales, de las frutas y los vegetales.

* Extract a drink containing vitamins

and minerals from fruits and vegetables.

2ninjakitchen.com

CONTENTS

THANK YOU

for purchasing the Ninja® Foodi® Power Blender & Processor System

PLEASE READ CAREFULLY AND

KEEP FOR FUTURE REFERENCE�

TECHNICAL SPECIFICATIONS

Voltage: 120V~, 60Hz

Power: 1200 Watts

TIP: You can ﬁnd the model and serial

numbers on the QR code label on the

back of the unit by the power cord.

RECORD THIS INFORMATION

Model Number: ��

Serial Number: ��

Date of Purchase: ��

(Keep receipt)

Store of Purchase: ��

registeryourninja.com

Scan QR code using mobile device

4ninjakitchen.com

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

1 Read all instructions prior to using the

appliance and its accessories.

2 Carefully observe and follow all warnings

and instructions. This unit contains

electrical connections and moving parts

that potentially present risk to the user.

3 Take your time and exercise care during

unpacking and appliance setup. This

appliance contains sharp, loose blades

that can cause injury if mishandled.

4 Upon completion of processing, ensure

the blade assembly is removed BEFORE

emptying container’s contents. Remove

the blade assembly by carefully grasping

the top of the shaft and lifting it from the

container. Failure to remove the blade

assembly before emptying the container

results in a risk of laceration.

5 If using the pitcher’s pour spout, hold the

cover in place on the container or ensure

lid lock is engaged when pouring to

avoid risk of injury.

6 Take inventory of all contents to ensure

you have all parts needed to properly

and safely operate your appliance.

7 Blades are sharp. Handle carefully.

8 This product is provided with a Stacked

Blade Assembly. exercise care ALWAYS

when handling blade assemblies. The blade

assemblies are sharp and are locked NOT

in place in their containers. The blade

assemblies are designed to be removable

to facilitate cleaning and replacement if

needed. ONLY grasp the blade assembly

by the top of the shaft. Failure to use care

when handling the blade assemblies will

result in a risk of laceration.

9 ALWAYS exercise care when handling

the Hybrid Edge™ Blades Assembly. The

blades are sharp. ONLY grasp the Hybrid

Edge Blades Assembly by the outer

perimeter of the blade assembly base.

Failure to use care when handling the

blade assembly will result in a risk

of laceration.

10 Turn the appliance , then unplug the OFF

appliance from the outlet when not in

use, before assembling or disassembling

parts, and before cleaning. To unplug,

grasp the plug by the body and pull from

the outlet. unplug by grasping NEVER

and pulling the ﬂexible cord.

11 Before use, wash all parts that may

contact food. Follow washing instructions

covered in this instruction manual.

12 Before each use, inspect blade

assemblies for damage. If a blade is

bent or damage is suspected, contact

SharkNinja to arrange for replacement.

13 DO NOT use this appliance outdoors. It is

designed for indoor household use only.

14 This appliance has a polarized plug (one

prong is wider than the other). To reduce

the risk of electric shock, this plug will

ﬁt in a polarized outlet only one way. If

the plug does not ﬁt fully in the outlet,

reverse the plug. If it still does not ﬁt,

contact a qualiﬁed electrician. DO NOT

modify the plug in any way.

15 DO NOT operate any appliance with

a damaged cord or plug, or after the

appliance malfunctions or is dropped or

damaged in any manner. This appliance

has no user-serviceable parts. If damaged,

contact SharkNinja for servicing.

WARNING

Read and review instructions for operation and use�

Indicates the presence of a hazard that can cause personal injury,

death or substantial property damage if the warning included with this

symbol is ignored�

For indoor and household use only�

When using electrical appliances, basic safety precautions should always be

followed, including the following:

6ninjakitchen.com

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

38 If you ﬁnd unmixed ingredients sticking

to the sides of the cup, stop the

appliance, remove the blade assembly,

and use a scraper to dislodge ingredients.

39 DO NOT open the pitcher’s pour spout

cap while blender is operating.

40 If you ﬁnd unmixed ingredients sticking

to the sides of the pitcher, stop the

appliance, remove the lid, and use a

spatula to dislodge ingredients. NEVER

insert your hands into the pitcher, as

you may contact one of the blades and

experience a laceration.

41 DO NOT attempt to remove the container

or lid from the motor base while the

blade assembly is still spinning. Allow the

appliance to come to a complete stop

before removing lids and containers.

42 If the appliance overheats, a thermal switch

will activate and temporarily disable

the motor. To reset, unplug the appliance

and allow it to cool for approximately

15 minutes before using again.

43 DO NOT expose the containers and

accessories to extreme temperature

changes. They may experience damage.

44 Remove the Hybrid Edge™ Blades

Assembly from the single-serve cup or

Smoothie Bowl Maker upon completion

of blending. store ingredients DO NOT

before or after blending them in the

cup or bowl with the blade assembly

attached. Some foods may contain

active ingredients or release gases that

will expand if left in a sealed container,

resulting in excessive pressure buildup

that can pose a risk of injury. For

ingredient storage in the cup, use only

Spout Lid or Storage Lid to cover.

45 The maximum wattage rating for this

appliance is based on the conﬁguration

of the Hybrid Edge Blades Assembly and

single-serve cup. Other conﬁgurations

may draw less power or current.

46 DO NOT submerge the motor base or

control panel in water or other liquids.

DO NOT spray motor base or control

panel with any liquid.

47 DO NOT attempt to sharpen blades.

48 Turn o the appliance and unplug the

motor base before cleaning.

49 Unit is intended to create a dough ball.

It is intended to continuously NOT

knead. After dough ball forms, additional

kneading should be done by hand

on a work surface. If the unit moves

excessively on the work surface, remove

the dough ball and knead by hand.

WARNING

8ninjakitchen.com

PARTS

A Pitcher Lid

B 72 oz.* Power Blender & Processor Pitcher

C Motor Base

(attached power cord not shown)

D Total Crushing® & Chopping Blade

Assembly (Stacked Blade Assembly)

E Dough Blade Assembly

F Hybrid Edge™ Blades Assembly

G Spout Lid

H 24 oz. Nutrient Extraction** Cup

I Storage Lid

J 14 oz. Smoothie Bowl Maker

with built-in tamper

*64 oz. max liquid capacity.

There are a variety of accessories that are

compatible with this blenderseries.

To purchase more accessories, visit

ninjakitchen.com.

NOTE: The top ﬂap of your box shows

the select accessories that are included

with your model.

BEFORE FIRST USE

NOTE: The Hybrid Edge Blades

Assembly is not compatible with other

Ninja products.

NOTE: Number of cups, bowl makers,

and lids vary by model.

** Extract a drink containing vitamins and minerals

from fruits and vegetables.

10 ninjakitchen.com

USING THE CONTROL PANEL

AUTO-IQ MODE

6 unique timed programs customized to

take the guesswork out of making great

drinks and meals.

MANUAL MODE

Choose from 10 dierent speeds for total

control of your blending in the pitcher.

Use the Power button to turn the unit on or o.

SWITCHING BETWEEN AUTO-IQ® AND MANUAL MODE:

To toggle between Auto-iQ Mode and Manual Mode, press the IQ/MANUAL button.

SELECT AND RUN AN AUTO-IQ PROGRAM

Use the dial to select the desired program,

then press START/STOP to begin. As the

program runs, the timer will count down.

When the countdown ends, blending will

stop automatically.

SELECT AND RUN A MANUAL PROGRAM

Turn the dial from speed 1 to speed 10. Press

START/STOP to begin and end blending.

PULSE

Oers greater control of pulsing and

blending. Operates only when PULSE is

pressed. Use short presses for short pulses

and long presses for long pulses.

NOTE: In Manual Mode, Auto-iQ programs will not illuminate on the control panel.

START SLOW

Always start at a low speed (1–3) to better incorporate ingredients and prevent them from

sticking to the side of the vessel.

DIAL UP THE SPEED

Smoother blends call for higher speeds. Low speeds are great for chopping veggies and

mixing dough, but you’ll need to ramp up for purees and dressings.

HIGH-SPEED BLENDING

Blend until you get your desired consistency. The longer you blend, the better the

breakdown and smoother the outcome will be.

NOTE: If using the Dough Blade Assembly, only use speeds 1 or 2.

NOTE: Only speed 10 is available when

using the Smoothie Bowl Maker or

Single-Serve Cup.

USING THE AUTO-IQ® PR

USING VARIABLE SPEED CONTROL & THE POWER

BLENDER & PROCESSOR PITCHER

12 ninjakitchen.com

1 Plug in motor base and place on a clean,

dry, level surface such as a countertop

or table.

2 Lower the pitcher onto the motor base.

The handle should be aligned slightly

to the right and the pitcher should be

oriented so the LOCK symbols are visible

on the motor base. Rotate the pitcher

clockwise until it clicks into place.

3 Exercising care, grasp the Stacked Blade

Assembly by the top of the shaft and

place it onto the drive gear inside the

pitcher. Note that the blade assembly

will ﬁt loosely onto the drive gear.

4 Add ingredients to the pitcher. DO NOT

add ingredients past the MAX LIQUID

line on the pitcher.

5 Place the lid on the pitcher. Press down on

the handle until it clicks into place. Once

the lid is locked in place, press the Power

button to turn unit on. The available

program buttons will illuminate and the

unit will be ready for use.

NOTE: Auto-iQ® programs have pauses and

changes in speed throughout the cycle.

NOTE: DO NOT add ingredients before

completing installation of the Stacked

Blade Assembly.

NOTE:

If the Stacked Blade Assembly is

not fully seated, you will not be able to

install and lock the lid.

NOTE:

The pitcher lid handle will not fold

down unless it is attached to the pitcher.

USING THE POWER BLENDER & PROCESSOR PITCHER

& STACKED BLADE ASSEMBLY

14 ninjakitchen.com

1 Plug in motor base and place on a clean,

dry, level surface such as a countertop

or table.

2 Lower the pitcher onto the motor base.

The handle should be aligned slightly

to the right and the pitcher should be

oriented so the LOCK symbols are visible

on the motor base. Rotate the pitcher

clockwise until it clicks into place.

3 Exercising care, grasp the Dough Blade

Assembly by the top of the shaft and

place it onto the drive gear inside the

pitcher. Note that the blade assembly

will ﬁt loosely onto the drive gear.

NOTE: Auto-iQ® programs have pauses and

changes in speed throughout the cycle.

NOTE: DO NOT add ingredients before

completing installation of the Dough

Blade Assembly.

NOTE:

If the Dough Blade Assembly is

not fully seated, you will not be able to

install and lock the lid.

NOTE:

The pitcher lid handle will not fold

down unless it is attached to the pitcher.

4 Add ingredients to the pitcher. DO NOT

add ingredients past the orDOUGH MAX

COOKIE MAX line on the pitcher.

5 Place the lid on the pitcher. Press down on

the handle until it clicks into place. Once

the lid is locked in place, press the Power

button to turn unit on. The available

program buttons will illuminate and the

unit will be ready for use.

USING THE POWER BLENDER & PROCESSOR PITCHER

& DOUGH BLADE ASSEMBLY

16 ninjakitchen.com

1 Plug in motor base and place on a clean,

dry, level surface such as a countertop

or table.

2 Add ingredients to the Smoothie Bowl

Maker. DO NOT add liquid past the

LIQUID FILL line or ingredients past the

MAX FILL line.

3 Place the Hybrid Edge™ Blades Assembly

on the top of the bowl maker and turn

clockwise to seal.

4 Turn the bowl maker upside down and

install on motor base by aligning the tabs

on the bowl maker with the slots on the

base. Then, rotate bowl maker clockwise

until it clicks. Once locked in place, press

the Power button to turn unit on. The

available program buttons will illuminate

and the unit will be ready for use.

5a If using an Auto-iQ program, use the dial

select the program that best suits your

desired output, then press START/STOP.

During the blending process, ensure to

twist the built-in tamper counterclockwise

continuously. The preset feature will

automatically stop at the end of the

program. To stop the unit at any time,

press START/STOP.

5b For Manual mode, press IQ/MANUAL. With

speed 10 on the display, press START/STOP.

During the blending process, twist the built-in

tamper counterclockwise continuously. Once

the ingredients have reached your desired

consistency, press START/STOP and wait for

the unit to come to a complete stop.

NOTE: Auto-iQ® programs have pauses and

changes in speed throughout the cycle.

NOTE: If the unit is plugged in and powered

on, but the bowl and blade assembly is not

properly installed, the timer will display - -”

and the motor will be disabled.

NOTE: While processing, twist the built-in

tamper counterclockwise continuously.

NOTE: Only speed 10 is available when

using the bowl maker.

USING THE SMOOTHIE BOWL MAKER

18 ninjakitchen.com

1 Plug in motor base and place on a clean,

dry, level surface such as a countertop

or table.

2 Add liquid then ingredients to the

single-serve cup. add DO NOT

ingredients past the line.MAX LIQUID

3 Place the Hybrid Edge™ Blades Assembly

on the top of the cup and turn clockwise

to seal.

4 Turn the cup upside down and install on

the motor base by aligning the tab on

the cup with the slots on the base. Then,

rotate cup clockwise until it clicks. Once

locked in place, press the Power button

to turn unit on. The available program

buttons will illuminate and the unit will

be ready for use.

NOTE: Auto-iQ® programs have pauses and

changes in speed throughout the cycle.

5a If using an Auto-iQ program, use the

dial to select the program that best

suits your desired output, then press

START/STOP. The preset feature will

automatically stop at the end of the

program. To stop the unit at any time,

press START/STOP.

5b For Manual mode, press IQ/MANUAL.

With speed 10 on the display, press

START/STOP. Once the ingredients have

reached your desired consistency, press

START/STOP and wait for the unit to

come to a complete stop.

NOTE: If the unit is plugged in and powered

on, but the cup and blade assembly is not

properly installed, the timer will display “- -”

and the motor will be disabled.

NOTE: Only speed 10 is available when

using the single-serve cup.

USING THE NUTRIENT EXTRACTION* CUP

20 ninjakitchen.com

CARE & MAINTENANCE

USING THE BLENDER

FOR STUCK-ON INGREDIENTS

1 After processing, immediately clean the

container and blade assembly under

warm, soapy water.

2 Depending on the container, ﬁll with soap

and water according to the following

instructions:

72-ounce Pitcher:

With the dough or stacked blade

assembly installed, ﬁll with warm water up

to DOUGH MAX line and add 1 or 2 small

drops dish soap. Secure pitcher lid, and

ensure the pour spout is securely closed.

Smoothie Bowl Maker:

Fill with warm water up to top of built-in

tamper and add 1 or 2 small drops dish

soap. Install blade assembly.

Single-Serve Cup:

Fill halfway with warm water and

add 1 small drop dish soap. Install

blade assembly.

3 Install the container on the motor base.

Select BOWL, then press START/STOP.

4 Once program is complete, thoroughly

rinse container and blade assembly

under warm, soapy water.

NOTE: If using the Smoothie Bowl Maker,

twist the built-in tamper counterclockwise

continuously while cleaning.

1 SMALL DROP OF DISH SOAP

FILL WATER HALFWAY

1 OR 2 SMALL DROPS OF DISH SOAP

FILL WATER TO

DOUGH MAX LINE

NOTE: For best results, use a dishwasher

to remove stuck-on ingredients.

1 OR 2 SMALL DROPS OF DISH SOAP

FILL WATER TO TOP

OF BUILT-IN TAMPER

Produkt Specifikationer

Mærke:	Ninja
Kategori:	Blender
Model:	SS351

Har du brug for hjælp?

Hvis du har brug for hjælp til Ninja SS351 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Blender Ninja Manualer

Ninja Blast Manual

30 December 2025

Ninja Foodi CI100EU Manual

15 November 2024

Ninja CT660UKV Manual

16 September 2024

Ninja SS351 Manual

30 August 2024

Ninja BL642EU Manual

23 August 2024

Ninja FOODI HB150ANZ Manual

21 August 2024

Ninja Nutri BN450 Manual

21 August 2024

Ninja Nutri BN451 Manual

20 August 2024

Ninja Nutri Pro BN500A Manual

20 August 2024

Ninja BL490EU2 Manual

17 August 2024

Blender Manualer

Nyeste Blender Manualer

Imarflex ICB-2150PRO Manual

2 April 2025

Bosch ErgoMaster Serie 4 MSM4B6V2 Manual

22 Marts 2025

Toshiba BL-60PHNMY Manual

18 Marts 2025

Toshiba BL-70PR1NMY Manual

18 Marts 2025

Redmond RHB-2961 Manual

28 Februar 2025

Sheffield PLA0375 Manual

26 Februar 2025

Trisa 6919.7545 Manual

26 Februar 2025

Philco PHTB 2400 Manual

22 Februar 2025

Philco PHTB 2401 Manual

22 Februar 2025

Concept SM3491 Manual

22 Februar 2025