O&O Software 034447 Manual


Læs nedenfor 📖 manual på dansk for O&O Software 034447 (55 sider) i kategorien Nytte. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/55
O&O PartitionManager - I
Copyrights
Text, illustrations and examples have been produced with great care. The editor is neither legally nor in any other way
liable for incorrect information given and its possible consequences.
This document is protected by copyright. All rights reserved. Without written approval no part of this document may
be reproduced through photocopying, microfilming or any other procedure, nor may it be translated into a language
used by machines, especially data-processing plants. Rights are likewise reserved for quotation in lectures, on radio and
television.
Microsoft, Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 2003, Windows 2008, and Windows
2008 R2 are registered trademarks of Microsoft Corporation, Redmond, WA, USA. O&O and the O&O-logo are reg-
istered trademarks of the O&O Software GmbH, Berlin.
Rev. 3/17/2010 10:24 AM
©2006-2010 O&O Software GmbH Am Borsigturm 48 • 13507 Berlin Germany
http://www.oo-software.com
O&O PartitionManager - II
Contents
About O&O PartitionManager 3 1
Tips and important instructions 1
Important features at a glance 1
The differences between the Editions 2
System requirements 4
Installation 5
Enter license 5
Using the test version 6
Updates 6
Uninstall 7
Online registration 8
What are the advantages of online registration at O&O? 8
How does online registration work? 9
Getting started 10
Terminology 11
Drive 11
Basic disks 11
Dynamic disks 11
MBR and GPT layout 11
Primary and extended partition 12
Logical drive 12
Change the size of a drive 12
Change the size of a partition 12
Move a partition 13
Change the size of a volume 14
Optimize the size to a minimum 16
O&O PartitionManager - III
Dividing a large partition into a number of smaller ones 17
Change several small partitions into one large one. 18
Modify system partition 18
Edit various disk types 19
Convert to a basic disk or a dynamic disk. 19
Convert to MBR or GPTDisk 20
Create a primary partition 21
Create an extended partition 22
Create a logical drive 23
Convert to logical drive 25
Create a new simple volume 25
Create a new spanned volume 25
Create a new stripe set 26
Create a new mirrored volume 27
Create a new RAID-5 volume 27
Mirror drive 28
Advanced functions 29
Recognize new disks 29
Format drives 29
Delete drive 30
Delete the contents of a drive securely 30
Delete disk securely 31
Securely delete free areas of a disk 32
Rename drive and change paths 32
Display properties 32
Using the Start CD 34
Boot directly from CD 34
O&O PartitionManager - IV
Load drivers 35
VDS backward compatibility under Windows PE 36
Support and contact 37
Authorized resellers 37
End user license agreement 2.5 (EULA) 38
About O&O PartitionManager 3
O&O PartitionManager - 1
About O&O PartitionManager 3
Thank you for deciding to purchase O&O PartitionManager! A hard disk organized into partitions can decisively con-
tribute to rescue data or restore individual partitions including its content, in the case of a system error or a system
crash. The O&O PartitionManager offers you the possibility to subdivide your hard disk into partitions, to move these,
to change their size and much more. What makes it even more unique is the integration of O&O SafeErase, our multiple
award-winning tool for deleting data securely. This is something that comes in very handy when you no longer need a
certain partition and wish to free the space it’s taking up on the disk.
O&O PartitionManager is also a component of O&O BlueCon, our all-around solution when it comes to repairing dam-
aged systems or restoring lost data. You can learn more about it on the Product Pages of our website.
We wish you lots of fun and success working with O&O PartitionManager! We will be very happy to answer all your
questions about this and any other of our products.
Yours O&O Software
http://www.oo-software.com
Important: there is a risk, in the event a job cannot be run successfully, that data saved on the respective drives
could be partially, or even totally lost. To be on the safe side, we suggest you create an image of the original drives
before using the O&O PartitionManager: a tool like is ideal for this purpose.O&O DiskImage
Tips and important instructions
Important! Create an image of your data! There is a risk, in the event a job cannot be run successfully, that data
saved on the respective drives could be partially, or even totally lost. To be on the safe side, we suggest you create
an image of the original drives before using the O&O PartitionManager: a tool like O&O DiskImage is ideal for this
purpose. Even if youre not intending to change individual partitions or volumes, you should still create an image of
important data or your entire hard disk, before you begin using O&O PartitionManager.
Note: You must be a member of a local administrator group or possess comparable permissions in order to work
with O&O PartitionManager on a local computer.
Note: Deleting or changing the system partition with O&O PartitionManager is only possible by using the Start CD
under Windows PE.
Important features at a glance
Partitions are used, for example, to separate documents from programs. The division into two partitions has estab-
lished itself: a system partition with all Windows- and software files and one data partition with all personal files, like
photos, videos or Office documents. This makes it easier to image or restore data using data imaging products such as
O&O DiskImage.
NEW: Server Editions that can be used on server operating systems.
About O&O PartitionManager 3
O&O PartitionManager - 2
NEW: Processingof stripe sets on all Windows operating systems. A stripe set saves data alternately in stripes on
selected disks. As this involves simultaneously contacting ever more (at least two) disks, the load will be divided, which
means data can be written and read faster with a stripe set than with a simple or spanned one.
NEW: Processing RAID 5 volumes on Windows Server operating systems. A RAID-5 volume is a mixture of payload and
data redundancy. This makes a RAID-5 volume very fault-tolerant. If you create, for example, a RAID 5 volume using
three dynamic disks of 10GB each, the entire volume will have a capacity of 20 GB. The remaining disk space will be used
for storing backup data (parity).
NEW: Mirror disk and create mirrored volumes (under Windows 7 and Windows Server operating systems). Unlike
stripe sets, identical data will be written onto the disks of a mirrored volume. The data will therefore be “mirrored”
from one disk, e.g., hard disk, to another. This provides you with a “backup copy”, just in case one disk is defective.
Advanced right-click function
The advanced entries enable an even better overview an much more comfortable hard disk management. You can, for
example, open partitions/volumes directly by right-clicking them and by now convert logical drives and primary par-
titions. The properties entry shows all disk details in one overview.
Support of all disk types
As a basis for providing professional disk management, O&O PartitionManager supports a wide range of disks.
Besides recognizing basic disks support is also given to dynamic disks, as well as removable storage media, such as
USB sticks and memory cards. This enables you to create various disk types and convert them to one disk type or
another. For example, you can convert a basic disk into a dynamic disk and there create a spanned volume.
Modify the system partition through the Start CD
The usual disk management programs often only offer a limited possibility to change the system partition. Usually, you
will need to restart the computer and work in the native mode, where you not have the possibility to change anything.
The Start CD of the O&O PartitionManagers is based on Windows PE. You will be able to easily and comfortably
shrink, extend or move the system partition, depending on the data volume and file system.
Change the size of a partition
Depending on the size and data allocation, it's possible to change the size of a partition. You can, for instance, divide a
large partition into several smaller ones, or bundle up several small partitions to a large one.
Delete data securely
If you delete data, it will become invisible to your "system". Your data, however, is still present on your hard disk. You
have to be very careful when giving away or selling your computer. Data spies can easily reconstruct you private and
business data using standard data recovery software such as O&ODiskRecovery. To make sure your data is per-
manently deleted, use the integrated deletion feature, O&O SafeErase. The data you delete can never be restored: not
even with special data recovery software.
The differences between the Editions
O&O PartitionManager is available in two editions:
lO&O PartitionManager Professional Edition
lO&O PartitionManager Server Edition
About O&O PartitionManager 3
O&O PartitionManager - 3
The Professional Edition is the version to use for a single PC. It cannot be used on a server operating system. The fol-
lowing functions can additionally be run under Windows 7:
lCreate a new mirrored volume
lMirror drive
The Server Edition can be used on both a server and a desktop computer. The following functions can additionally be
run on a server operating system:
lCreate a new mirrored volume
lMirror drive
lCreate a new RAID-5 volume
System requirements
O&O PartitionManager - 4
System requirements
lThe system requirement of each operating system have to be fulfilled
l1 GB RAM recommended (Start CD)
l20 MB free hard disk space
lSupported by 32 Bit/64 Bit
lSupported file systems: Windows file systems FAT12/FAT16/FAT32/NTFS4/NTFS5
lTo display the program help you will need the Microsoft Internet Explorer 5.5 or a higher version
Operating systems supported
Operating system Professional Edition Server Edition
Windows® 7 yes yes
Windows® Vista® yes yes
Windows® XP yes yes
Windows® 2000 Professional yes yes
Windows® 2000 Server no yes
Windows® Server 2003 no yes
Windows® Server 2008 no yes
Windows® Server 2008 R2 no yes
Permissions
You must be a member of a local administrator group, or possess comparable permissions, in order to install and reg-
ister O&O PartitionManager. Domain Administrators normally already possess these permissions.
Installation
O&O PartitionManager - 5
Installation
Installing O&O PartitionManager is very straight forward. Please follow the steps below:
1. Start the computer on which you would like to install O&O PartitionManager.
2. Login as local administrator or as a user possessing comparable permissions.
3. Start the installation file from O&O PartitionManager, which you have either downloaded from our server or
have on your personal CD ROM.
4. After the setup program has been successfully initialized, please follow the installation dialogue.
5. When prompted, restart your computer.
Enter license
Note: In order to activate the product after installation or to gain access to the Full Version at a later time, you must
possess a valid license key. This license key is also called a registration code, serial number, or product ID. If you do
not enter a valid license key, you can use O&O PartitionManager as test version. Should you have any questions,
please contact our Support Team.
The dialogue for registration always appears automatically at the start to guide you if you are using an unregistered ver-
sion or have entered the registration code incorrectly.
The registration wizard allows for a simple registration process.
When you select the option Enter your registration code, a dialog box will appear where you can enter the registration
code you received when purchasing the software.
lIf you have purchased the software as download, please enter the license information ("Name", "Company"
and License key), just as they are written in the confirmation E-Mail you received.
lIf you have purchased the software as Box version, please enter the license key as it is written on the license card
included. In addition, please enter your name and if needed your company.
1. Please make sure that you do not confuse the digit “1” with “I or enter any empty spaces where they don’t
belong.
2. Press to save the registration data orNext Cancel to leave the dialog window without saving the data.
3. When you have correctly entered the license code you will receive a confirmation in the dialog window.
You can now register online and benefit from many advantages, such as technical support and free upgrades.
Should you run into any problems when entering your registration code, please contact our Support Team.
Installation
O&O PartitionManager - 6
Registration Wizard
Using the test version
You can test O&O PartitionManager without making any commitments and for free for up to 30 days. The remaining
days of the trial period are displayed whenever you start up the program. The trial version is not restricted – all pro-
gram functions are fully operational. Yet, you should keep in mind that certain applications, such as shrinking or deleting
a system partition can only be performed with the O&O PartitionManager Start CD, which you will receive whenever
you buy the product.
Updates
If you want to update O&O PartitionManager to a newer version, youll need the license key. Please follow the fol-
lowing directions:
1. Start the installation of O&O PartitionManager.
2. Complete the O&O PartitionManager installation in the normal way.
3. Once finished, the new version is fully installed.
4. Restart the computer, when asked to do so.
O&O PartitionManager - 7
Uninstall
To remove O&O PartitionManager from your PC, please follow the following instructions:
1. Open the Control Panel from the Windows Start menu.
2. Select Software Programs and functionsor .
3. Please select O&O PartitionManager from the list of installed software and then click Remove Uninstallor .
4. Confirm the uninstallation of O&O PartitionManager. Once the uninstall process is complete you will receive a
confirmation message.
5. Restart the computer, when asked to do so.
Note: Please bear in mind that the Microsoft control panel is differently structured depending on the operating sys-
tem. Some terminologies might therefore slightly differ. If you have difficulties while uninstalling our program, please
consult our Support.
Online registration
O&O PartitionManager - 8
Online registration
In order to register an O&O Product online, you’ll need the registration code that you received at the time you pur-
chased your product. This registration code is also called a license key, a serial number or product ID.
If youd like to register, start the O&O program. The questions related to online registration always appear at the
start, provided you havent registered online.
What are the advantages of online registration at O&O?
Online registration gives you the benefit of having your customer data kept safely in our files, which means we can pro-
vide you with even better service.
This comes in very handy if, for example, you’re unable to find the access code to your product. The license code is
needed for making Updates or reinstalling the O&O programs on your computer if it ever needs to be set-up again.
Online registration
O&O PartitionManager - 9
Further advantages will let you:
lBe supplied with the latest information about our products
lMake free updates on new versions of purchased items (minor updates)
lUpgrade to a new version at a special discount price (major update)
lObtain support from our customer service
lAnd much, much more...
How does online registration work?
If your O&O program was purchased on our Online Shop, youve automatically registered with us. If it was purchased
through a dealer, you’ll be asked during installment if you’d like to register. You then have the option of either reg-
istering immediately or at another time. All you’ll need is a functioning Internet connection and a valid license key.
You may also complete the registration form right here:
http://www.oo-software.com/register
Just return the completed online form by clicking “Send and youll be eligible to take full advantage of our O&O Cus-
tomer Service.
Getting started
O&O PartitionManager - 10
Getting started
The following chapters will give you a broad view of the program functions available on O&O PartitionManager. Many
functions on it have been designed in a way similar to the Windows Disk Manager. Beyond that, however, O&O Par-
titionManager has a number of useful functions that will make it even easier for you to manage your hard disk.
You can start O&O PartitionManager under Start/Programs/O&O Software/O&O PartitionManger. The Online Help
will open, if you click on Help or press .F1
Important! There is a risk, in the event a job cannot be run successfully, that data saved on the respective drives
could be partially, or even totally lost. To be on the safe side, we suggest you create an image of the original drives
before using the O&O PartitionManager: a tool like is ideal for this purpose.O&O DiskImage
Tip: Additional information to the use of individual disk types is available in chapter Terminology.
User Interface of O&O PartitionManager
Getting started
O&O PartitionManager - 11
Terminology
All the different disk types will be explained in the following section.
Drive
In the following text, the term “drive” will be used to depict (single) partitions as well as logical drives in expanded par-
titions and volumes. A drive is a reserved area of the hard disk. Multiple drives can be found on a hard disk.
Drives are used, for example, to separate documents from programs. A division in at least two partitions has become
generally accepted:
lDrive C: for operating systems and programs
lDrive D: for documents, e.g. photos, Office documents, music, etc.
This makes it easier to image or restore data using data imaging products such as O&O DiskImage.
Basic disks
A basic disk is a physical disk, e.g., a hard disk. On a basic disk it is not possible to create dynamical volumes.
Dynamic disks
A dynamic disk is a physical disk, e.g., a hard disk, which is so formatted that it’s also able to support dynamic volumes.
Dynamic volumes can be sprawled over a number of disks.
Dynamic disks from new or unknown hard disk will initially be displayed as unallocated spaces. With the help of O&O
PartitionManager, you can import them so that they will be displayed as dynamic disks.
Note: Certain problems may arise when trying to import disks of various Windows Versions, e.g., W2K and XP. This
is why you should only import disks of the same Windows Version.
MBR and GPT layout
Basic and dynamical disks can be structured according to a MBR (Master Boot Record) or GPT (GUID Partition Table)
Layout.
It’s possible to create up to four primary partitions on a basic disk, or three primary partitions and one extended par-
tition.
On a basic disk with a GPT layout it is possible to have up to 128 partitions without the need for an extended partition.
On a dynamical disk with a MBR layout it is possible to create unlimited dynamical volumes.
On a dynamical disk with a GPT layout it is possible to create up to 128 dynamical volumes.
Getting started
O&O PartitionManager - 12
Primary and extended partition
Aprimary partition functions just like a separate disk: it can be used for installing an operating system.
It is possible to create one or several logical drives on an extended partition.
Logical drive
It is possible to subdivide an extended partition into several logical partitions. A logical drive is not a "real" partition,
but an area in an extended partition. A logical drive can only be created on an extended partition. An operation system
can also be installed on a logical drive. To start this, an additional boot partition has to be created as primary partition
on the disk.
Change the size of a drive
You can change the size of a partition, a volume, or a spanned volume. It's also possible to move a partition.
Change the size of a partition
1. To change the size of a drive, right-click the desired drive or in the menu bar on Action/All actions on the start
page of O&O PartitionManager and select Change location and size.
2. Adapt the drive size in the dialogue under Partition size according to the shown minimum and maximum values.
Note: Please bear in mind that you can only extend the partition by the free space available, which lies behind the
drive in the graphical drive display.
Note: We recommend choosing the option Optimize the size to a minimum, before shrinking your drive. Opti-
mizing can take some time, depending on the size of the partition.
Getting started
O&O PartitionManager - 13
Changing partition size
Note: If the job is not successfully run, there is a risk that data saved on the drive will be partially or fully lost. To be
on the safe side, before increasing the size of a drive, create an image of the original drive with O&O DiskImage.
Note: Please bear in mind that shrinking or extending the system partition is only possible from the Start-CD under
Windows PE. For more information consult chapter Change system partitions.
Move a partition
Important! We strongly advise against moving a system partition under Windows Vista. Moving a partition will
result in Windows not automatically starting the next time you start your computer.
Note: Please bear in mind that you can only move the partition by the free space available in the direction you are
moving it to. The free space must be located directly behind the partition, otherwise it is not possible to move it.
1. To move a partition, right-click the partition or in the menu bar under Action/All actions Change location andon
size.
2. Adapt the position of the volume in the disk under Beginning of partition. The higher the value, the more it will
move to the back.
Getting started
O&O PartitionManager - 14
Change the size of a volume
Volumes are located on dynamic disks. There are simple and spanned volumes. A spanned volume needs to be located
on at least two dynamic disks.
lTo extend the size of a volume, right-click the volume and then click Extend volume. All the available disks will
be displayed.
Right-click menu of a volume
Extend simple volume
1. If you only want to extend the volume, just enter the desired size under Disk space in MB.
2. Click Continue in the wizard and set additional settings. The extended volume will then be created.
Extend the volume onto multiple disks
1. If you want to extend a volume onto multiple disks, select the addtional disks you want from the list on the left
and click Add. This will result in the volume being automatically created as a spanned volume in a later process.
Getting started
O&O PartitionManager - 15
2. Now specify the respective size of the volume for each disk. Select the first disk under "Selected" and enter the
size you want the volume to be under Disk space in MB. Then select the second disk and enter the size you want
the volume to be on this disk.
3. Click Continue in the wizard and set additional settings. The spanned volume will then be created on the disks
you have selected.
Shrink volume
1. To shrink a volume, right-click the volume and then click Shrink volume. All the available disks will be displayed.
2. If the volume is located on multiple disks (spanned volume), you can select whether the volume should be shrunk
on all or just one of the disks.
3. Using Add /Remove select the disk or disks you want. By removing a disk from the selection, the volume will not
be shrunk on it.
4. Click Continue in the wizard and set additional settings. The volume will then be shrunk.
Note: Only simple or spanned volumes can be extended or shrunk. RAID, mirrored, and stripe set volumes cannot
be changed.
Change the size of a volume
Getting started
O&O PartitionManager - 16
Optimize the size to a minimum
You can shrink a drive (volume or partition) down to its free disk space and even until the last physical file on the vol-
ume. You can also find free space in between files on some drives (so called "holes") that cannot be used when shrink-
ing. These holes can be closed by optimizing the drive. We therefore recommend optimizing your drive before shrinking
it. As a result, all files will be reorganized and saved back to back (which uses up less space). In other words, your files
will physically be moved forward, and the distance from the last file to the end of the drive will be increased. This will
allow the drive to be shrunk to a minimum. The process of optimization is based on the technology contained in our mul-
tiple award-winning defragmentation program, O&O Defrag.
Important: If shrinking the drive is not successfully run, there is a risk that data saved on the drive will be partially or
fully lost. To be on the safe side, before reducing the size of a drive, create an image of the original drive with O&O
DiskImage.
Note: Please bear in mind that shrinking or extending the system partition is only possible when using the Start CD
under Windows PE. For more information consult chapter Change system partitions.
Optimize the size to a minimum


Produkt Specifikationer

Mærke: O&O Software
Kategori: Nytte
Model: 034447

Har du brug for hjælp?

Hvis du har brug for hjælp til O&O Software 034447 stil et spørgsmål nedenfor, og andre brugere vil svare dig