On Air Pro Stand Manual
On Air
Kamerastativ
Pro Stand
Læs nedenfor 📖 manual på dansk for On Air Pro Stand (2 sider) i kategorien Kamerastativ. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
NTRODUCTION & FEATURES
PRODUCT OVERVIEW &
FUNCTIONS
TIPS FOR PLACEMENT AND USE
ACKAGE CONTENTS
ACKAGE SPECIFICATIONS
USING YOUR FLOOR TRIPOD
FUNCTION
• Expanding Legs with Rubber
Feet for Any Terrain.
• Includes Handlebar for Smooth
Panning & Tilting Motions
• Easy Height Adjustment &
Sturdy Build for Stability.
CARE & IMPORTANT SAFEGUARDS
Boost the production quality of your video projects with the
On Air Live Pro Floor Tripod Stand. This sturdy floor tripod
stand eliminates shaky, unbalanced camera movements and
enables anyone to direct with ease and skill. Shoot
high-quality, fluid cinematic videos any time and enjoy easy
height and angle adjustments no matter the terrain. Each unit
comes equipped with expanding legs and rubber feet, making
it perfect for any type of filming project, even on the go.
1 x Floor Tripod Stand
1 x Spring-Loaded Smartphone Holster
User Manual
Please read this user manual in its entirety before using your new tzumi
On Air Live Pro Floor Tripod Stand.
Hook
Tripod
Mount
Mount Plate Release
Handlebar
Bubble Level
Center Column
Adjustment Key
Leg Lock Knob
Vertical
Locking
Knob
Max. Weight Load: 6.6 lb
Extended (Max.) Height: 54.6 in
Min. Height: 19.1 in
Folded Height: 19.9 in
Assembled Weight: 1.91 lb
STEP 1: EXTEND THE TRIPOD LEGS.
• Always extend the legs from the top flip-locks first.
• Pull on each flip-lock and extend the leg to its desired
height. Relock each leg.
STEP 2: SPREAD THE TRIPOD LEGS.
• Plant the front leg of the tripod in position.
• Lift the back two legs and pull the unit back to spread them
to the full extension of the mid-level spreader.
STEP 3: SET THE TILT.
• Release the tilt lock, if necessary, and set the tilt so that the
head is flat and ready for mounting your camera.
• Retighten the tilt lock.
STEP 4: SET THE PAN ANGLE.
• Release the pan lock , if necessary, and rotate the head to
set it in the direction in which you plan to shoot.
• Retighten the pan lock.
STEP 5: MOUNT YOUR CAMERA/ SMARTPHONE
TO THE TRIPOD.
• Check that your tripod legs are locked and that the tripod is
stable and ready for mounting your camera.
• Connect your camera to the mount plate. When connected,
place the plate firmly back into the square slot on the base
and press until you feel a “click”.
• After attaching the camera to the mount, set its position
where the camera is the most balanced.
• Retighten the mounting plate lock firmly.
• The unit also features a spring-loaded smartphone holster,
which can be attached to the unit vertically or horizontally.
To attach, screw the holster clockwise onto the tripod base
until secure and unmoving.
• The bracket expands to fit the width of most phone models.
Using both hands, carefully expand the brackets by pulling
them apart. Insert your smartphone and gently release the
bracket. It will form a tight grip around your device until
released again.
STEP 6: START SHOOTING!
• If you don’t need to pan or tilt during your shot, keep the
pan and tilt knobs locked.
• TO PAN: Release the pan lock knob. Using the pan/tilt bar,
move the tripod left or right to pan.
• TO TILT: Release the tilt lock knob. Using the pan/tilt bar,
move the tripod up or down to tilt.
• Turn the center column crank handle clockwise to raise the
column or counterclockwise to lower it.
STEP 7: TEAR DOWN THE TRIPOD WHEN FINISHED.
• When tearing down your tripod, bring the legs together,
collapsing the mid-level spreader.
• Remove the mount plate by pulling the release hook
outwards and simultaneously pulling the plate up to
disconnect.
• Release the flip-locks on the legs and slide the leg
extensions back to the closed position.
• Secure the flip-locks. Your tripod can now be safely placed
inside a storage or travel bag if desired.
• Remove the camera from the ball head every time you plan
to transport or disassemble.
• It’s widely recommended to extend all tripod legs to their
maximum length rather than obtaining height only using
the center column. Only extend the center column if you
need to.
• When placing the tripod in position, keep one leg pointing
in the direction that the smartphone/camera will be pointed
once attached to the unit. The remaining two legs should be
positioned so you can stand between them. This position
ensures the firmest balance and decreases the likelihood of
bumping into the tripod while taking a shot.
• Avoid over-tightening the flip lock adjustment screw; this
may cause improper operation.
• It is not necessary to use lubrication with this unit. If you
prefer to use a lubricant, only use standard lubricant or
grease when necessary.
• Do not exceed the tripod’s maximum load capacity of
6.6 lbs.
• To clean, wipe down with a soft dry or damp cloth. Do
not use with cleaning agents or other chemical solutions.
• This unit is not waterproof. Do not expose to water,
moisture, extreme temperatures, or high levels of
humidity.
• Never set up or disassemble a tripod while a camera is
mounted. Never move the tripod or adjust the legs after a
camera has been mounted.
• Never leave a camera unattended on the tripod.
• Never mount a camera to the tripod until all the tripod
legs are locked and stabilized.
• Do not lift or move the tripod by the head.
• Keep hands clear of the inside of the legs, to avoid
trapping and injuring fingers.
• Never attempt to disassemble or modify your On Air Live
Pro Floor Tripod Stand in any way. Doing so violates any
warranty in place and may cause permanent damage to
the unit.
• Safe tripod operation is the sole responsibility of the user.
Contact the Customer Support team at tzumi.com/support
for assistance.
tzumi® On Air Tripod Stand Distributed by tzumi® INC.
NY, NY 10016 ©Copyright 2019 tzumi® All Rights Reserved.
Made In China.
d
PodCastSeries
• Ensure that the ball head is locked before shooting or
making any further adjustments to the unit.
• Do not operate if the environment temperature is below
-20° C (-4° F) or above 70° C (158 ° F).
• Do not leave the tripod in direct sunlight or lean it
against hot surfaces, like the exterior of a car, for long
periods of time.
Produkt Specifikationer
| Mærke: | On Air |
| Kategori: | Kamerastativ |
| Model: | Pro Stand |
Har du brug for hjælp?
Hvis du har brug for hjælp til On Air Pro Stand stil et spørgsmål nedenfor, og andre brugere vil svare dig
Kamerastativ On Air Manualer
14 December 2024
Kamerastativ Manualer
- Kamerastativ SilverCrest
- Kamerastativ Sony
- Kamerastativ Braun
- Kamerastativ Easypix
- Kamerastativ Pyle
- Kamerastativ Hama
- Kamerastativ Laserliner
- Kamerastativ Bresser
- Kamerastativ Rollei
- Kamerastativ DJI
- Kamerastativ Swarovski
- Kamerastativ GoPro
- Kamerastativ Celestron
- Kamerastativ Zhiyun
- Kamerastativ Rode
- Kamerastativ Sachtler
- Kamerastativ Arkon
- Kamerastativ Ravelli
- Kamerastativ Freefly
- Kamerastativ Proaim
- Kamerastativ Manfrotto
- Kamerastativ Joby
- Kamerastativ Magnus
- Kamerastativ Neewer
- Kamerastativ Easyrig
- Kamerastativ Sevenoak
- Kamerastativ Miller
- Kamerastativ Sky-Watcher
- Kamerastativ Square Jellyfish
- Kamerastativ SmallRig
- Kamerastativ Robus
- Kamerastativ Sunpak
- Kamerastativ Libec
- Kamerastativ Celly
- Kamerastativ Velbon
- Kamerastativ Auray
- Kamerastativ Stalco
- Kamerastativ Vanguard
- Kamerastativ IOptron
- Kamerastativ E-Image
- Kamerastativ Cam Caddie
- Kamerastativ Really Right Stuff
- Kamerastativ Ruggard
Nyeste Kamerastativ Manualer
13 December 2024
13 December 2024
10 December 2024
9 December 2024
5 December 2024
5 December 2024
5 December 2024
20 November 2024
17 November 2024
17 November 2024