Oregon Scientific AS688NE Manual

Oregon Scientific Clockradio AS688NE

Læs nedenfor 📖 manual på dansk for Oregon Scientific AS688NE (2 sider) i kategorien Clockradio. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

- Thank you for your purchase of this Clock.

- In order to optimize its function, be sure to read this manual

carefully and keep it for future reference.

INSTRUCTION MANUAL

FEATURES

- Unique Night FinderTM feature to locate the clock in the dark.

- View the current time and alarm time simultaneously.

- Wake gently! The audible alarm initially sounds with a series of

beeps at a low level, and gradually increases in volume.

- Eight minute snooze function activates with unique Lite Touch

feature.

- Bright blue HiGloTM backlight illuminates the display for easy

night-time viewing and flashes when the alarm goes off.

- Protective hinged cover keeps buttons from resetting in transit

and also acts as a table-top stand.

DESCRIPTION OF PARTS

A. Night Finder indicator

B. Alarm ON/OFF indicator

C. Down button

D. ALARM ON/OFF switch

E. TIME SET/LOCK/ALARM SET switch

F. Up button

A) 12 hour display

B) 24 hour display

[ SEE FIG. I ]

INSTALLING AND REPLACING BATTERY

The unit uses two pieces of AAA Alkaline battery for backlight and

one piece of LR44 button cell for clock.

If the display backlight becomes dim, remove the exhausted AAA

batteries and follow these steps to replace them:

1. Slide the battery door “J” in the direction of the arrow.

2. Insert the AAA battery as indicated by the polarity symbols

( + and - ) marked inside the battery compartment.

3. Replace the battery compartment door.

If the display becomes dim, remove the exhausted LR44 button

cell battery and follow these steps to replace it:

1. Use a philips type screw driver to unscrew the battery hatch “I”

and open it.

2. Remove the exhausted LR44 battery and insert fresh battery as

indicated by the polarity symbols marked inside the battery

compartment.

3. Replace the battery hatch and fasten the lock-screw with a screw

driver.

TABLE STANDING

To use the cover as a stand, rotate the hinged cover over the back of

the clock.

[ SEE FIG. 5 ]

HOW TO SET THE CLOCK TIME

1. Lift the cover to reveal the setting buttons.

2. Slide the [TIME SET/LOCK/ALARM SET] switch to the

TIME SET position. The time on the top of display flashes

[SEE FIG.2] :

C) 12 hour display

D) 24 hour display

3. Press the [UP] or [DOWN] arrow button to increase/decrease the

setting in one minute increments until the desired hour and

minute are dis-played. Press and hold the [UP] or button[DOWN]

for faster setting.

4. When the correct time is displayed, slide the [TIME SET/LOCK/

ALARM SET] switch to the LOCK position. The time display

stops flashing and the time is set.

HOW TO SET THE ALARM TIME

1. Slide the [TIME SET/LOCK/ALARM SET] switch to the

ALARM SET position. The alarm time at the bottom of the

display flashes [SEE FIG.3]:

E) 12 hour display

F) 24 hour display

2. Press the [UP] or arrow button to increase/decrease the[DOWN]

setting in one minute increments until the desired hour and

minute are displayed. Press and hold the [UP] or [DOWN] button

for faster setting.

3. Slide the [TIME SET/LOCK/ALARM SET] switch to the LOCK

position. The alarm time display stops flashing and the alarm

time is set.

IMPORTANT: After your alarm time has been set, you MUST slide

the [ALARM ON/OFF] switch to the ON position to activate the

alarm.

ABOUT THE ALARM

1. Slide the [ALARM ON/OFF] switch to the ON position. An

alarm ON/ OFF indicator is displayed on the LCD display. Now

the alarm will sound at the programmed time.

2. The alarm wakes you gently with a series of beeps that gradually

increase in volume.

3. To silence the alarm slide the [ALARM ON/OFF] switch to the

OFF position. The alarm indicator disappears from the display

and the alarm is deactivated.

Note:

Remember, you must slide the [ALARM ON/OFF] switch to the

ON position to use again. However, for your convenience, the alarm

will automatically shut off after one minute and will sound again

at the same time the next day.

HOW TO USE THE SNOOZE

The Lite Touch feature enables you to activate the 8 minute snooze

by gently rocking the alarm backwards on its stand with the touch

of your fingers. [ SEE FIG. 4 ]

LITE TOUCH HiGloTM BACKLIGHT

Using the Lite Touch feature, the display backlight will be activate

for three seconds so you can see the display in the dark. The light

then automatically turns off.

[ SEE FIG. 4 ]

UNIQUE NightfinderTM FUNCTION

Press the [NIGHT FINDER] button once and [ ] appears on the

display.

The display backlight flashes every few seconds.

Note: The NightﬁnderTM feature is intended for use in a very dark

environment. You may not be able to see the flashing display under

normal light conditions.

G. Night Finder button

H. Buzzer

I. Battery hatch for clock

J. Battery cover for backlight

K. Reset button

[SEE FIG.6 & FIG.7]

IMPORTANT: The NightfinderTM should only be used in an

unfamiliar enviroment, such as hotel room, so as not to drain the

battery. Under constant use conditions, the battery life will be

reduced significantly.

THE RESET FUNCTION

If your clock doesn’t work properly, you can use a pin object to

push the [RESET] button once to reset the unit. After reset you

need to set the clock and alarm times again.

MAINTENANCE

The following suggestions will help you care for the Travel Alarm

Clock so you can enjoy it for years.

1. Keep the Clock dry. If it gets wet, wipe it dry immediately, liquids

might contain minerals that can corrode the electronic circuits.

2. Use and store the Clock only in normal temperature

environments. Temperature extremes can shorten the life of

electronic devices, damage batteries, and distort or melt plastic

parts.

3. Handle the Clock gently and carefully. Dropping it can damage

circuit boards and cause the Travel Alarm Clock to work

improperly.

4. Keep the Clock away from dust and dirt, which can cause

premature wear of parts.

5. Wipe the Clock with a damp cloth occasionally to keep it

looking new. Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the Clock.

6. Use only fresh batteries of the required size and type. Always

remove old or weak batteries. They can leak chemicals that can

destroy electronic circuits.

7. Modifying or tampering with the Clock’s internal components

can cause a malfunction and might invalidate is warranty.

SPECIFICATIONS

Operation temperature : 0°C to 50°C (32°F to l22°F)

Accuracy : +/- 0.5 seconds per day

Power Source : Two pcs. UM-4 or ‘AAA’ size Alkaline

batteries (excluded) one pc. LR44

button cell battery (included)

Dimension : 82 x 108 x 15 mm / 3.23 x 4.25 x 0.6

inch (H x W x D)

Weight : 92 gms / 3.3 ounces (without battery)

CAUTION

— The content of this manual is subject to change without

further notice.

— Due to printing limitation, the displays shown in this

manual may differ from the actual display.

— The contents of this manual may not be reproduced without

the permission of the manufacturer.

CUSTOMER ASSISTANCE

Should you require assistance regarding this product and its

operation, please contact our customer care department at

541-868-8205 or via email at helpme@oscientific.com.

WARRANTY

This product is warranted to be free of manufacturing defects for a

period of 90 days from date of retail purchase. Defective product

should be directed to the place of retail purchase for exchange.

Should this not be possible, contact our customer care department

for assistance and a return material authorization. No returns may

be made without a return authorization. Please retain your retail

receipt as you may be asked to provide a copy of it for proof of date

purchased.

This warranty does not cover product subjected to abuse, misuse,

accidental damage or tampering. Upon return of the defective

product, Oregon Scientific will at its discretion, replace the product

with either a new or a tested reconditioned product. Should the

product be out of warranty, the consumer may purchase directly

from Oregon Scientific a replacement at reasonable cost plus

shipping and handling.

TRAVEL ALARM CLOCK

WITH BACKLIGHT

AND NIGHT FINDER

Model AS-688NE

FIG.1

FIG.2

FIG.3

FIG.4

FIG.5

FIG.6

FIG.7

- Nous vous remercions d’ avoir acheté ce l’horloge..

- Afin d’utiliser cet appareil au mieux de ces capacités, nous vous

recommandons de lire ce manuel avec attention et de le conserver

pour votre référence future.

MANUEL D’INSTRUCTIONS

CARACTERISTIQUES

- La fonction unique Balise Nocturne Night FinderTM permet de

localiser l’horloge dans l’obscurité.

- Affichez l’heure et l’heure de réveil simultanément.

- Reveillez-vous en douceur! Le réveil commence à sonner à bas

volume puis augmente le son progressivement.

- La fonction “Somme” d’une durée de 8 minutes est déclenchée

à l’ aide du système Ultra-Sensible

- L’éclairage HiCiloTM bleu vif éclaire l’écran et permet la lecture

dans l’obscurité; il clignote également lorsque le réveil sonne.

- Le couvercle de protection à charnières empêche l’ activation

des touches pendant le transport et sert également de support

DESCRIPTIF DES ELEMENTS

A. Témoin indicateur du Night Finder.

B. Témoin de M/A sonnerie

C. Touche recul

D. Bouton de M/A SONNERIE

E. Bouton de MISE A L’HEURE / VERROUILLAGE /

PROGRAMMA TION REVEIL

F. Touche d’avancée

A) Affichage en format 12H

B) Affichage en format 24H

[VOIR SCHEMA 1]

INSTALLATION ET REMPLACEMENT DE

LA PILE

L’ appareil utilise 2 piles UM-4 ou Alcaline du tupe ‘AAA’ pour la

lumière de fond et une pile LR44 (incluse) pour l’heure.

Si l’affichage devient faible, enlevez les piles AAA usagées et suivez

les étapes suivantes pour les remplacer:

1. Faites glisser le couvercle du compartiment à pile dans le sens

de la flèche.

2. Installez la pile de type AAA en respectant la polarité (+et-)

indiquée à l’intérieur du compartiment.

3. Remettez le couvercle du compartiment à pile.

Si l’affichage devient faible, enlevez la piles LR44 usagées et suivez

les étapes suivantes pour les remplacer:

1. Utiliser un tournevis du type philips pour desserrer la couverture

du logement des piles “I” et ouvrez-la.

2. Enlevez les piles usagées LR44 et insérez une pile fraîches tel

qu’indiqué par les symboles de polaritè l’intérieur du logement

des piles.

3. Replacez la couverture du logement des piles and serrez-la avec

un tournevis.

SUPPORT HORIZONTAL

Pour transformer le couvercle en support, faites pivoter le couvercle’

vers arrière de l’horloge.

[VOIR SCHEMA 5]

MISE A L’HEURE DE L’HORLOGE

1. Soulevez le couvercle pour accéder aux touches de

programmation.

2. Faites glisser le bouton [TIME SET / LOCK / ALARM SET] en

position TIME SET. L’heure affichée en haut de l’écran

commence alors à clignoter. [VOIR SCHEMA 2]

C) Affichage en format 12H

D) Affichage en format 24H

3. Appuyez sur la touche [UP] ou [DOWN] pour faire avancer ou

reculer les chiffres jusqu’a ce que l’heure désirée apparaisse à

l’écran. Gardez la touche enfoncée pour accélérer le changement.

4. Lorsque l’heure exacte est affichée, faites glisser le bouton [TIME

SET / LOCK / ALARM SET] en position LOCK. L’heure affichée

cesse de clignoter, signalant que l’heure est programmée.

PROGRAMMATION DU REVEIL

1. Faites glisser le bouton [TIME SET / LOCK / ALARM SET] en

position ALARM SET. L’heure de réveil affichée en bas de l’écran

commence alors à clignoter. [VOIR SCHEMA 3]

E) Affichage en format 12H

F) Affichage en format 24H

FRANCAISENGLISH

Produkt Specifikationer

Mærke:	Oregon Scientific
Kategori:	Clockradio
Model:	AS688NE

Har du brug for hjælp?

Hvis du har brug for hjælp til Oregon Scientific AS688NE stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Clockradio Oregon Scientific Manualer

Oregon Scientific CIR600 Manual

14 December 2024

Oregon Scientific TW223 Manual

2 September 2024

Oregon Scientific TW369 Manual

2 September 2024

Oregon Scientific RM336PES Manual

16 August 2024

Oregon Scientific RRM 902 Manual

16 August 2024

Oregon Scientific AS688NE Manual

15 August 2024

Oregon Scientific RRA320P Manual

15 August 2024

Oregon Scientific RRM112A Manual

15 August 2024

Oregon Scientific BAR 669 Manual

15 August 2024

Oregon Scientific RM313PNA Manual

14 August 2024

Clockradio Manualer

Nyeste Clockradio Manualer

16 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

15 December 2024

Vimar 14449.SL Manual

15 December 2024

TFA Sonio 60.2514 Manual

14 December 2024

TFA 60.2551.01 Manual

14 December 2024

TFA 60.1511.02 Manual

14 December 2024