Oricom CU850 Manual

Oricom Baby-produkt CU850

Læs nedenfor 📖 manual på dansk for Oricom CU850 (1 sider) i kategorien Baby-produkt. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
CU - -850 2014 09 05
CU 085 PT
User Guide
1.0 Getting started
The CU be850PT baby unit (camera) suits SC850 4.3" Video Baby Monitor. Up to 4 baby units (cameras) can registered
to unit. one parent
2.0 Registering the Baby Unit (Camera)
FOR ALL OTHER INSTRUCTIONS, PLEASE REFER TO YOUR SC850
USER GUIDE.
1.1 Power supply
a) otherConnect small baby the plug power of the adaptor to the unit the and
end to the electrical mains power outlet.
b) To the to the ON switch the unit, on baby slide power switch
position. The power LED will light up.
c) To switch off the baby unit, slide the power switch to the OFF position.
1.2 Connecting and aligning the baby unit
Position the baby unit with a minimum distance of 1m to other electronic devices,
otherwise there is a risk of mutual disturbance. Point the upper section of the baby
unit towards the baby or object you want to monitor. Check that the baby or object is
suitably displayed on the parent unit screen. Ensure the antenna is extended
vertically for optimum range.
Use only the AC with the as other power adaptor supplied product
adaptors could damage the product. This product is designed for
indoor use only.
The parent and baby unit are pre-registered. Registration can also be completed manually: Up to 4 baby units can be
registered to one parent unit. follow the procedure below: To re-register your baby unit, or register a new baby unit,
(1) Switch on the parent unit.
(2) On monitor <Camera> mode, press and hold key for 5
seconds, it will go to registration mode.
(3) [ press After registration icon ] comes up on screen,
<▲> or <▼> to select the camera channel [C1] or [C2] or [C3] or
[C4] that you want the baby unit to pair with.
(4) Press and release <Menu> key to confirm which camera
number to be registered.
(5) The Link LED then flashes rapidly for 10 seconds.
(6) Switch the baby unit ON. Press the pair key once
(at the back of the camera).
(7) If r egistration video is completed, c amera appears on
LCD screen a nd return to normal mode. Baby unit will
return to normal mode too.
(8) If the registration expired registration time is or is failed,
[Out Range] appears on LCD. Should this of occur,
please attempt the registration process once more.
NOTE:
If articular a p channel had been registered al register ready, this
particular over-writ t registration.channel again will e he old

Produkt Specifikationer

Mærke: Oricom
Kategori: Baby-produkt
Model: CU850

Har du brug for hjælp?

Hvis du har brug for hjælp til Oricom CU850 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Baby-produkt Oricom Manualer

Oricom

Oricom 08KBEAR Manual

22 Oktober 2024
Oricom

Oricom OLS150 Manual

24 August 2024
Oricom

Oricom 08CAT Manual

20 August 2024
Oricom

Oricom OLS100 Manual

18 August 2024
Oricom

Oricom Babysense7 OBH500 Manual

16 August 2024
Oricom

Oricom OS10 Manual

16 August 2024
Oricom

Oricom OBH930 Manual

16 August 2024
Oricom

Oricom Babysense7 OBH430 Manual

15 August 2024
Oricom

Oricom OBHSSOO Manual

15 August 2024
Oricom

Oricom OBHGPRO Manual

15 August 2024

Baby-produkt Manualer

Nyeste Baby-produkt Manualer

Contours

Contours Element Child Tray Manual

3 December 2024
Kolcraft

Kolcraft Tiny Steps Too Manual

3 December 2024
Sealy

Sealy Antibacterial Waterproof Manual

3 December 2024
Contours

Contours Boogie Manual

3 December 2024
Kolcraft

Kolcraft Tiny Steps Manual

3 December 2024
Kolcraft

Kolcraft Tiny Steps Roadster Manual

3 December 2024
Kolcraft

Kolcraft Tiny Steps Groove Manual

3 December 2024
Contours

Contours Reversible Second Seat Manual

3 December 2024
Contours

Contours Pramette V2 Manual

3 December 2024
Contours

Contours Child Tray V2 Manual

3 December 2024