OSD Audio AP650 Manual


Læs nedenfor 📖 manual på dansk for OSD Audio AP650 (3 sider) i kategorien Højttaler. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
Thank you for giving OSD AUDIO the chance to earn your business! We are condent you will nd that OSD oers an outstanding combination of performance
and value in everything we make. To ensure you get the most out of your new patio speakers, please take a moment to read this manual before you get started.
Installing Speakers
These weather resistant patio speakers are manufactured to resist
a variety of weather condition. The most ideal place to install these
speakers is the undersides of most eaves and overhangs as they
provide the best protection.
Like all speakers, they sound the best when placed no more than
seven feet apart from each other, and slightly higher than ear level.
If the speakers are more than seven feet apart, toe them in toward
the center of the listening area.
These speakers are not waterproof and cannot be submerged under
water.
Placing Speakers
If your application requires the speaker to be mounted, please
follow these directions. Using the hardware supplied, mount the
bracket rst. Attach the speakers to the brackets using the large
plastic knobs supplied. Never mount a speaker on a wall made
of unreinforced drywall or plasterboard. If you are unsure,
consult a professional contractor. (See Diagram 1)
The binding post speaker terminals on the speakers will accommodate
up to 12-guage wire. When using 70V amplier output, please select a
power setting through the knob switch. When connecting the speakers,
it is very important to observe the correct polarity. This means that the
wire attached to the (+), red, or positive terminals on one component
must be attached to the (+), red, or positive terminal on the
corresponding component speaker output terminals. Similarly, the (-),
Black, Negative or ground terminals must connect to the respective (-),
Black, Negative, or ground terminals. This is easy to do by locating the
color stripes that appears on most wire.
Painting the grilles
The metal grilles may also be painted. Use very thin paint (5:1). It will
be easier to paint the grilles while it is o the speaker. Avoid
plugging up the holes with excess paint.
Mounting
To install the bracket on the speaker. Screw the bracket knobs into the
cabinet. Point the speaker toward the listening area. Once the direction
of the speaker has been determined tighten the bracket knobs securely.
(See Diagram 2)
Diagram 1
Screw
Bracket
Diagram 2
First remove the grille fom the speaker using spray paint lightly go
over the front of the grille and then go over the back of the grille.
Two coats may be nessesary for desired look.
Knob
Knob
x
x


Produkt Specifikationer

Mærke: OSD Audio
Kategori: Højttaler
Model: AP650

Har du brug for hjælp?

Hvis du har brug for hjælp til OSD Audio AP650 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler OSD Audio Manualer

OSD Audio

OSD Audio ACE840TT Manual

24 September 2024
OSD Audio

OSD Audio SVC-100 Manual

24 September 2024
OSD Audio

OSD Audio ACE600ST Manual

19 September 2024
OSD Audio

OSD Audio ICE630ST Manual

18 September 2024
OSD Audio

OSD Audio LS2 Manual

18 September 2024
OSD Audio

OSD Audio Black R63A Manual

5 September 2024
OSD Audio

OSD Audio Black R83 Manual

5 September 2024
OSD Audio

OSD Audio Black R63 Manual

5 September 2024
OSD Audio

OSD Audio Black R61 Manual

5 September 2024
OSD Audio

OSD Audio Black R81 Manual

5 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Tannoy

Tannoy QFLEX 32 Manual

6 November 2024
Tannoy

Tannoy QFLEX 24 Manual

6 November 2024
James

James PD320.4 Manual

5 November 2024
James

James QX330 Manual

5 November 2024
James

James QX3CS Manual

5 November 2024
James

James QX530 Manual

5 November 2024
James

James QX520 Manual

5 November 2024
James

James QX5CS Manual

5 November 2024