OSD Audio BTR-800 Manual

OSD Audio Speaker BTR-800

Læs nedenfor 📖 manual på dansk for OSD Audio BTR-800 (1 sider) i kategorien Speaker. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
®BTR-800
All Weather Bluetooth Rock Speaker
System Quick Start Guide
.....
...............
.........
Speaker Wire - Included
Sync to bluetooth-
enable devices like
smartphones and
tablets
Bluetooth Range
60-75 feet
Only one connection at a time:
The BTR-800 syncs with only one device at a time. You must
disconnect the current device before Syncing to another device.
Range may vary:
Distances, both unobstructed and
obstructed, may differ depending
on device you are syncing up to the
BTR-800.
Make sure both your Bluetooth device and the
OSD BTR-800 are turned on!
To pair two Bluetooth enabled devices, both the Bluetooth
Device and the BTR-800 must be turned on and fully powered
or fully charged. Bluetooth controls are typically found in the
device’s Setting or Connections menu. The BTR-800 will output
a Bluetooth Sync code that will be received by the Bluetooth
Device. Settings such as Volume, Mute, etc., will be controlled
directly from your Bluetooth phone, tablet or other device.
“State of the art” Bluetooth
Operation Connects to any
Bluetooth enabled device
Master Speaker Pairing Speaker
10ft 15ft
Power Supply
30ft
CONTENT:
Master Speaker
Bluetooth Receiver
Internal Stereo Amplifier
110-240V
Power Supply
for Master Speaker
30’ Speaker Wire
To connect the speakers
together for stereo R&L
Pairing Speaker
Rock Speakers
1) The Master Bluetooth Rock Speaker should be located near a 12 volt AC outlet so the Power Supply
can be connected to the Master Rock Speaker in order to provide the electrical current needed for the
Internal Amplifier and Bluetooth Receiver. Choose a location where the Power Supply block will not be
sitting in water.
2) The Pairing Rock Speaker must be connected to the Master Rock speaker using the 30-foot Speaker
Wire supplied with the kit. The speaker wire can be cut down for an exact fit but should not be extended
beyond 30 feet.
Basic Setup of the BTR-800:


Produkt Specifikationer

Mærke: OSD Audio
Kategori: Speaker
Model: BTR-800

Har du brug for hjælp?

Hvis du har brug for hjælp til OSD Audio BTR-800 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Speaker OSD Audio Manualer

OSD Audio

OSD Audio ICE630ST Manual

18 September 2024
OSD Audio

OSD Audio LS2 Manual

18 September 2024
OSD Audio

OSD Audio Black R63A Manual

5 September 2024
OSD Audio

OSD Audio Black R83 Manual

5 September 2024
OSD Audio

OSD Audio Black R63 Manual

5 September 2024
OSD Audio

OSD Audio Black R61 Manual

5 September 2024
OSD Audio

OSD Audio Black R81 Manual

5 September 2024
OSD Audio

OSD Audio Black R83A Manual

5 September 2024
OSD Audio

OSD Audio IW690 Manual

20 August 2024

Speaker Manualer

Nyeste Speaker Manualer

TOA

TOA PC-2668 Manual

18 September 2024
TOA

TOA PC-3WR-L Manual

18 September 2024
TOA

TOA BS-1120W Manual

18 September 2024
TOA

TOA TZ-105 Manual

18 September 2024
TOA

TOA BS-1110W Manual

18 September 2024
Anchor Audio

Anchor Audio AN-130U1BK Manual

18 September 2024
Teufel

Teufel Consono 15 Manual

18 September 2024
Bopita

Bopita Brent Manual

18 September 2024
JBL

JBL AWC82 Manual

18 September 2024