Ozito LTR-3725U Manual

Ozito Græstrimmer LTR-3725U

Læs nedenfor 📖 manual på dansk for Ozito LTR-3725U (3 sider) i kategorien Græstrimmer. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

LINE

TRIMMER

370W 250mm

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Power: 370W

No Load Speed: 12,000/min

Cutting Diameter: 250mm

Line Diameter: 1.2mm

Line Feed: Bump

Protection Class: II

Weight: 2.3kg

LTR-3725U

WHAT’S IN THE BOX

Line Trimmer

Safety Guard & Screw

Adjustable Handle &

Securing Bolt

LINE TRIMMER SAFETY WARNINGS

0118

Read the complete operating manual with due care.

Acquaint yourself with the controls and how to use the tool.

This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack

of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Important!

For safety reasons the grass trimmer is not to be used by children, young people under 16 years

of age, or any other persons who are not acquainted with these directions for use.

Keep the instruction manual in a safe place for later use.

¥ Examine the grass trimmer each time before you use it. Do not use the trimmer if any safety devices are damaged or worn.

¥ Never put safety devices out of operation.

¥ Do not use the grass trimmer if the cables are damaged or worn.

¥ Stop using the equipment when there are people – particularly children – or pets nearby.

¥ Use the grass trimmer only for the purpose specied in these instructions.

¥ You are responsible for safety in your work area.

¥ Inspect the items you want to cut before starting to work. Remove any foreign objects you nd. Watch out for foreign objects while

you work. If you still hit upon an obstacle while cutting, turn off the grass trimmer and remove the obstacle.

¥ Work only in good visibility.

¥ Always make sure of your footing while working. Be careful when stepping backwards. Risk of stumbling!

¥ Never leave the grass trimmer unattended at your work place. Store the trimmer in a safe place during interruptions.

¥ If you interrupt your work to move to a different position it is imperative to switch off the grass trimmer while you are moving there.

¥ Never use the grass trimmer in the rain or in moist or wet conditions.

¥ Protect the grass trimmer from the damp and rain.

¥ Before you switch on the grass trimmer, make sure that there are no stones or other objects touching the nylon line.

¥ Always wear suitable clothing to protect your head, hands and feet from injury. Wear a helmet, goggles or visor, high boots or

strong shoes, long trousers made of tough material, and work gloves.

¥ Be sure to hold the grass trimmer away from your body when it is switched on!

¥ If the grass trimmer is turned over or if it is not in working position, do not switch it on.

¥ Switch off the motor and pull out the power plug when you are not using the grass trimmer, when you leave the trimmer

unattended, when you are checking the trimmer, if the power cable is damaged, when you want to remove and replace the spool,

and when you are moving the trimmer to another location.

¥ Keep the grass trimmer away from other persons, particularly children and pets. There may be stones and other objects in the

ying cut grass.

¥ Keep at least 5 m away from other persons and animals when you are working with the grass trimmer.

¥ To prevent injury to yourself and damage to the grass trimmer, never cut against hard objects.

¥ Use the edge of the guard to keep the grass trimmer away from walls, changes of surface and fragile objects.

¥ Never use the grass trimmer without a guard.

CAUTION! The guard is vital for your safety and for the safety of others, and it is also

essential for the grass trimmer to work correctly. Failure to observe this instruction

will not only create a potential hazard, it will also result in the loss of your rights under the

warranty.

¥ Never try to stop the cutter (nylon line) with your hands. Wait until it stops by itself.

¥ It is imperative to use only the original nylon line. Never use metal wire instead of the nylon line.

¥ Beware of injuring yourself on the line cutting device.

¥ Keep the air vents clear of dirt.

¥ After use, unplug the machine and check it for damage.

¥ Never attempt to cut grass that is not growing on the ground. For example, do not try to cut grass growing on walls, rocks,

etc.

¥ Within the working radius of the grass trimmer the user is responsible for any damage caused to third persons by use of

the trimmer.

¥ Never cross roads or pebble paths with the grass trimmer switched on.

¥ When you are not using the grass trimmer, keep it in a dry place out of the reach of children.

¥ Use the grass trimmer only as described in these directions for use and always hold it vertical to the ground. All other

positions are dangerous.

¥ Check the screws regularly to see that they are properly tightened.

¥ The mains voltage must be the same as the voltage specied on the rating plate.

¥ Check the power cable regularly for signs of damage or aging. Never use the grass trimmer if the power cable is in less

than perfect condition.

¥ Power cables used with the trimmer must not be of a lighter duty class than HO7RN-F rubber insulated exible cables

according to DIN 57282 / VDE 0282 with a minimum diameter of 1.5 mm2. Plug connectors must be equipped with

earthing contacts and the coupling must be rain-water protected.

¥ If the cable is damaged during operation, disconnect it immediately from the power supply. DO NOT TOUCH THE CABLE

BEFORE IT IS DISCONNECTED FROM THE POWER SUPPLY.

¥ To prevent danger, damaged power cables must be replaced by the manufacturer or by a service company authorized by

the manufacturer to carry out the work.

¥ The equipment may only be powered via an earth-leakage circuit breaker (RCD) with a maximum operating current of 30

mA.

¥ Keep cables and other objects out of the area you want to cut.

¥ If you have to lift the grass trimmer to move it, switch off the motor and wait for the rotating tool to stop. Before you leave

the trimmer, switch off the motor and pull out the power plug.

¥ Before you connect the grass trimmer to the power supply, make sure that none of its moving parts are damaged and that

the line spool is correctly inserted and fastened.

¥ Never cut against hard objects when using the grass trimmer. This is imperative to avoid causing injury to the user and

damage to the trimmer.

¥ Use only original replacement parts for repair and maintenance purposes.

¥ Have repairs carried out only by a qualied electrician.

¥ Examine the grass trimmer for signs of wear or damage each time before you use it and after any collisions. Have

essential repairs carried out without delay.

¥ Always keep your hands and feet away from the cutting mechanism, particularly when you switch on the trimmer.

¥ After pulling out new line, always return the trimmer to normal working position before you switch it on again.

¥ Never use replacement parts or accessories which are not foreseen or recommended by the manufacturer.

¥ Pull out the power plug before carrying out any inspection, cleaning or other work on the trimmer and whenever it is not

being used.

¥ Use the equipment only in broad daylight or in well-lit conditions.

¥ Keep the extension cable away from cutting tools at all times.

Important: The nylon line continues to rotate for a few seconds after the motor is switched off.

The equipment does not start. OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

All of our products undergo strict quality checks to ensure that they reach

you in perfect condition. In the unlikely event that your device develops a

fault, please contact our service department at the address shown on this

guarantee card. You can also contact us by telephone using the customer

service number shown. Please note the following terms under which

guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the

manufacturer mentioned below promises to buyers of its new products

in addition to their statutory guarantee claims are not affected by this

guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or

manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we

prefer.

Please note that our devices are not designed for use in commercial, trade

or professional applications. A guarantee contract will not be created if the

device has been used by commercial, trade or industrial business or has

been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly

instructions or due to incorrect installation, a failure to follow the operating

instructions (for example connecting it to an incorrect mains voltage or

current type) or a failure to follow the maintenance and safety instructions

or by exposing the device to abnormal environmental conditions or by lack

of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example

overloading the device or the use or unapproved tools or accessories),

ingress of foreign bodies into the device (such as sand, stones or dust,

transport damage), the use of force or damage caused by external forces

(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural

wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original

date of purchase and is intended for DIY (Do It Yourself) use only. Warranty

excludes consumable parts. Guarantee claims should be submitted

before the end of the guarantee period within two weeks of the defect

being noticed. No guarantee claims will be accepted after the end of the

guarantee period. The original guarantee period remains applicable to the

device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work

performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR

Please refer to the restrictions of this warranty concerning wearing parts,

consumables and missing parts as set out in the service information in

these operating instructions.

CUSTOMER SERVICE HELPLINE

GB: 0151 294 4488

IRL: 1850 882711

Ozito-diy.co.uk

WARRANTY

ozito-diy.co.uk

MAINTENANCE

• Keep ventilation slots of the trimmer clean at all times. Periodically clean

out the grass from the cutting head and the rim of the cutting guard to ensure

efcient operation at all times.

• After each use, blow air through the tool housing to ensure it is free from all

dust, dirt, etc. Build up of dust, dirt particles may cause the tool to overheat and

shorten the life of the tool.

• If the housing of the trimmer requires cleaning, do not use solvents but a

moist soft cloth or soft brush only.

• Never let any liquid get inside the tool, never immerse any part of the tool into

liquid.

• No lubrication is necessary as the tool has sealed bearings.

• When not in use, the line trimmer should be stored in a dry, frost free location

not within the reach of children.

Note: Ozito Industries will not be responsible for any damage or injuries caused

by the repair of the line trimmer by an unauthorised person or by mishandling

of the line trimmer. This tool is designed for DIY use - use in commercial or

industrial environments will void the warranty.

Replacing the Spool and Line

WARNING! ENSURE THE TOOL IS DISCONNECTED FROM

THE POWER SUPPLY BEFORE PERFORMING ANY OF THE

FOLLOWING OPERATIONS.

WARNING! When using mains-powered tools, basic safety precautions, including the

following, should always be followed to reduce risk of re, electric shock, personal injury

and material damage.

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency,

before operating the tool.

Save these instructions and other documents supplied with this tool for future reference.

Before you connect the equipment to the mains supply make sure that the data on the rating plate are

identical to the mains data.

This tool is double insulated therefore no earth wire is required.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid

a hazard.

Note: Double insulation does not take the place of normal safety precautions when operating this tool. The

insulation system is for added protection against injury resulting from a possible electrical insulation failure

within the tool.

Using an Extension Lead

Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the

extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.

When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not

suitable for the power input of the tool or which is damaged or defective may result in a risk of re and electric

shock.

GENERAL POWER TOOL SAFETY WARNINGS

ELECTRICAL SAFETY

WARNING! “Read all safety warnings, instructions, illustrations and specications

provided with this power tool.” Failure to follow the warnings and instructions may result in electric

shock, re and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the warnings refers

to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool. Distractions can cause you to

lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching outlets will

reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the

risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase

the risk of electric shock.

e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do

not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. A

moment of inattention while operating power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to

power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your

nger on the switch or energising power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may result in personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the

power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure

these are connected and properly used. Use of dust collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of tools allow you to become complacent and

ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your application. The correct power tool

will do the job better and safer at the rate for which it was designed.

b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be

controlled with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from

the power tool before making any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the

power tool or these instructions to operate the power tool. Power tools are dangerous in the hands

of untrained users.

e. Maintain power tools and accessories. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s operation. If damaged,

have the power tool repaired before use. Many accidents are caused by poorly maintained power

tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking

into account the working conditions and the work to be performed. Use of the power tool for

operations different from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and

grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

5. Service

a. Have your power tool serviced by a qualied repair person using only identical replacement

parts. This will ensure that the safety of the power tool is maintained.

SPARE PARTS

Spare parts can be ordered from the Special Orders

Desk at your local Bunnings Warehouse or Homebase

store.

For further information, or any parts visit

www.ozito-diy.co.uk or contact Ozito Customer Service:

Great Britain: 0151 294 4488

Ireland: 1850 882711

E-mail: info@ozito-diy.co.uk

DESCRIPTION OF SYMBOLS

SERVICE INFORMATION

Please note that the following parts of this product are subject to normal

or natural wear and that the following parts are therefore also required

for use as consumables.

* Not necessarily included in the scope of delivery!

In the effect of defects or faults, please register the problem on the internet at

www.isc-gmbh.info. Please ensure that you provide a precise description of the

problem and answer the following questions in all cases:

• Did the equipment work at all or was it defective from the beginning?

• Did you notice anything (symptom or defect) prior to the failure?

• What malfunction does the equipment have in your opinion (main symptom)?

Describe this malfunction.

Category Example

Wear parts* Line spool holder

Consumables* Line spool

Missing parts

DECLARATION OF CONFORMITY

ADDITIONAL INFORMATION

Warning! Safety class II

Protect from moister

Wear eye protection and

ear plugs!

Read the instruction manual

before starting!

Pull out the mains plug before checking a damaged power cable!

Keep other people out of the danger area!

The equipment continues to rotate!

Decibel level

TROUBLESHOOTING

Problem Cause Remedy

Grass wraps

around the

attachment shaft

and the trimmer

head.

Cutting tall grass

at ground level.

Make several passes from

top down.

Wei/Product-ManagementWeichselgartner/General-Manager

explains the following conformity according to EU directives and norms for

the following product

Electric Line Trimmer LTR-3725U (Ozito)

2014/29/EU

2005/32/EC_2009/125/EC

2014/35/EU

2006/28/EC

X 2014/30/EU

2014/32/EU

2014/53/EC

2014/68/EU

90/396/EC_2009/142/EC

89/686/EC_96/58/EC

X 2011/65/EU

X 2006/42/EC

Annex IV

Notied Body:

Notied Body No.:

Reg. No.:

X 2000/14/EC_2005/88/EC

Annex V

X Annex VI

Noise: measured LWA = 92,7 dB (A); guaranteed L

WA = 94 dB (A)

P = 0,37 KW; L/Ø = 25 cm

Notied Body: Intertek Testing & Certication LTD (NB0359)

2012/46/EU

Emission No.:

Standard references: EN 60335-1; EN 50636-2-91; EN 62233;

EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3

Landau/Isar, den 08.12.2017

First CE: 17 Archive-File/Record: NAPR018084

Art.-No.: 30.002.62 I.-No.: 11017 Documents registrar: Alex Kurz

Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar

ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar

Danger!

Sound and vibration

Lpa sound pressure level: 81 dB(A)

Lwa

sound power level: 94 dB(A)

Vibration ah 3.0 m/s²

Wear ear-muffs.

The impact of noise can cause damage to hearing.

The specied vibration value was established in accordance with a

standardized testing method. It may change according to how the electric

equipment is used and may exceed the specied value in exceptional

circumstances. The specied vibration value can be used to compare the

equipment with other electric power tools.

The specied vibration value can be used for initial assessment of a

harmful effect.

Keep the noise emissions and vibrations to a minimum.

• Only use appliances which are in perfect working order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

For EU countries only

Never place any electric power tools in your household refuse.

To comply with European Directive 2012/19/EC concerning old electric

and electronic equipment and its implementation in national laws, old

electric power tools have to be separated from other waste and disposed

of in an environment-friendly fashion, e.g. by taking to a recycling depot.

Recycling alternative to the return request:

As an alternative to returning the equipment to the manufacturer, the

owner of the electrical equipment must make sure that the equipment is

properly disposed of if p1-he no longer wants to keep the equipment. The old

equipment can be returned to a suitable collection point that will dispose

of the equipment in accordance with the national recycling and waste

disposal regulations. This does not apply to any accessories or aids

without electrical components supplied with the old equipment.

The reprinting or reproduction by any other means, in whole or in part, of

documentation and papers accompanying products is permitted only with

the express consent of the iSC GmbH.

Subject to technical changes

1. Press the sides of the spool cover (a) and remove the cover.

5. When you start the equipment again the line will be cut to the

perfect length automatically.

2. Remove the empty line spool (b).

3. Thread the ends of the line on

the new line spool through the

eyelets in the spool cover and

allow approx. 10 cm of line to

project.

4. Fit the spool cover and spool

back into the spool mounting.

IMPORTANT!: BITS OF THE NYLON LINE COULD CAUSE

INJURY WHEN BEING FLUNG OUT.

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Græstrimmer
Model:	LTR-3725U

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito LTR-3725U stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Græstrimmer Ozito Manualer

Ozito PXCLTK-2182E Manual

6 Maj 2024

Ozito OGT-0185 Manual

27 Januar 2024

Ozito PXCGTK-150 Manual

9 December 2023

Ozito LTR-3725U Manual

16 November 2023

Ozito PXCLTS-018 Manual

20 Oktober 2023

Ozito PXCGTABLC-218E Manual

7 November 2022

Ozito LTR-529 Manual

5 Oktober 2022

Ozito PXCLTK-218 Manual

5 Oktober 2022

Græstrimmer Manualer

Nyeste Græstrimmer Manualer

Hyundai HYBC5200X Manual

21 November 2024

Hyundai HTFT60P Manual

23 Oktober 2024

9 September 2024

9 September 2024

9 September 2024

9 September 2024

9 September 2024

9 September 2024

9 September 2024

9 September 2024