P3 International P0260 Manual


Læs nedenfor 📖 manual på dansk for P3 International P0260 (2 sider) i kategorien Miljøtermometer. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Operating Manual
P0260
Sol-Mate Window Thermometer
Thank you for purchasing the P0260 Sol-Mate Window Thermometer. This window
thermometer is solar powered and can be placed either on the inside or outside of your
window/glass door via a removable suction cup. This unit will provide you with years of service if
cared for properly. Please read these operating instructions thoroughly before use.
How to Use:
Assembly
1. Moisten suction cup before attaching to the window or glass door for a secure seal.
Do not attach the suction cup to painted or other textured surfaces. The unit may fall
and damage may occur.
2. To use outdoors, place the suction cup on the front of the unit so that the display is
visible through the window.
3. To use indoors, place the suction cup on the back of the unit so the display is visible
when the unit is attached to the window.
4. To reverse the suction cup, slide it down and remove from the unit. Affix it on the
other side by sliding the suction cup mounting post into the slot and sliding upward.
Set Up
1. Press the ON button to turn your thermometer on. By default the temperature display
will be in Celsius, if you wish to change it to Fahrenheit press the ON button once
more.
2. To reset your unit, press the Reset button.
3. To turn off your unit, press and hold the ON button for 5 seconds or until unit turns
off.
Description
1. 13°F to This solar powered Window Thermometer has a temperature range from -
139°F (-25°C to 59.5°C) that displays in large LCD digits.
2. The Maximum and Minimum temperature during the last 24 hours will be recorded
and displayed on the screen.
3. The temperature is updated every 8 seconds and displayed for your viewing.
4. The Temperature Trend feature displays via arrow on the display whether the
temperature has dropped or risen from the original temperature read.
Note
1. The unit will display temperature where it is located. (e.g. Indoors = indoor
temperature). The local solar (sun) may affect temperature readings if left in direct
sunlight for too long.
2. In order to recharge the internal battery the solar panel must be exposed to direct
sunlight.


Produkt Specifikationer

Mærke: P3 International
Kategori: Miljøtermometer
Model: P0260

Har du brug for hjælp?

Hvis du har brug for hjælp til P3 International P0260 stil et spørgsmål nedenfor, og andre brugere vil svare dig