PAC LP7-2 Manual


Læs nedenfor 📖 manual på dansk for PAC LP7-2 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 28 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
1
L.O.C.PRO™ LP7-2
Line Output Converter
Before You Start
Replacing your radio? PAC also produces RadioPRO
which is a radio replacement solution, with steering wheel
control retention built-in. This greatly expedites the installation of a new radio into your vehicle.
To see if there is a RadioPRO
interface for your vehicle, visit www.pac-audio.com and search "Radio PRO".
Installation Instructions
The professional way to integrate
your new amplier or radio.
General Overview
Install It Right with L.O.C. PRO
Don’t cheat yourself out of all the performance your new radio or amplier can deliver. Proper audio line level
matching is critical when replacing your vehicle’s factory (OEM) radio or amplier. It can be the difference
between a great sounding system that you enjoy every day and a buggy, noisy mess that drives you crazy.
PAC L.O.C.PRO™ interfaces have been professionally designed for those who want the very best.
The L.O.C.PRO™ LP7-2 can be used for either replacing an OEM radio and retaining the factory amplied
system or adding ampliers to a system that does not have RCA outputs. L.O.C.PRO™ LP7-2 will also monitor
the audio input signal and automatically create an amplier remote turn-on for systems that do not have
one. Level matching is achieved using precision stereo gain dials and will enable proper adjustment of audio
output of the radio for optimum system performance. Differential inputs also allow for use in OEM BOSE and
other premium system scenarios. Included in these instructions are the most common applications for the
L.O.C.PRO™ LP7-2. For specialty applications not covered in this manual, please visit www.pac-audio.com for
more comprehensive, vehicle specic wiring diagrams. Direct url - www.pac-audio.com/products/locpro
Speaker Level Input to RCA Level Output
Speaker level input to RCA level output is the most commonly used conguration for the LP7-2.
Use this when you need to create RCA level outputs from a source that only has speaker level outputs.
The RCA input connectors on the main harness will not be utilized for this type of installation, we suggest
cutting them off the harness 3 inches from the RCA end so they can be saved and used for a future installation.
After all the connections are made on the remaining wires, skip to the level adjustment section of this manual.
Cut away RCA ends for wired speaker level inputs
Copyright 2013 Pacic Accessory Corporation. Content subject to change without notice.
Remote 12v + Output (500ma)
Constant 12v + Input
Chassis Ground -
Audio Ground Input -
Front Right Audio Input
Front Le Audio Input
+
+
+
+ +
+ + + + +
+ +
+ +
+ + +
+
+ + + + + + + +
+ + + + + + + + + + +
+ + + + + + + + + + + + + + + + + + + + +
+
+
+
+
+ +
+
+
+
+
+
+ +
+ +
+ +
+
Front Le Output
Front Right Output
(OPTIONAL
)
3"
Note: If using large RCA connectors that are difcult to insert into housing, unsnap the
L.O.C.PRO™ cover and remove end panel insert around RCA outputs.


Produkt Specifikationer

Mærke: PAC
Kategori: Ikke kategoriseret
Model: LP7-2

Har du brug for hjælp?

Hvis du har brug for hjælp til PAC LP7-2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret PAC Manualer

PAC

PAC RP4-GM31 Manual

6 September 2024
PAC

PAC NU-CTS2 Manual

6 September 2024
PAC

PAC TR7 Manual

6 September 2024
PAC

PAC OS-5 Manual

6 September 2024
PAC

PAC NDK735MG Manual

29 August 2024
PAC

PAC RP3-GM11 Manual

29 August 2024
PAC

PAC IR-X Manual

29 August 2024
PAC

PAC AAI-GM9 Manual

29 August 2024
PAC

PAC AAI-GM12 Manual

29 August 2024
PAC

PAC CP1-FRD2 Manual

29 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer