PAC NU-FRD1 Manual

PAC Ikke kategoriseret NU-FRD1

Læs nedenfor 📖 manual på dansk for PAC NU-FRD1 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Pacic Accessory Corporation - Santa Ana, CA 92705

techsupport@pac-audio.com • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com

10-14-09

J1850

Class 2

VPW

Class 2

J1850

100011101111001001101100

1110100 0011011 0111001100

Arbitration

EOD

CRC

100011101111001001101100

1110100 0011011 0111001100

Class 2

J1850

Class 2

VPW

Class 2

J1850

100011101111001001101100

1110100 0011011 0111001100

Arbitration

EOD

CRC

100011101111001001101100

1110100 0011011 0111001100

Class 2

J1850

NU-FRD1

Ford/Lincoln/Mercury

Navigation Unlock

Integration Interface

Installation: Disconnect the 24-pin and 16-pin harness from the back of the radio. Plug the male connectors on the NU-FRD1 harness into the 24-pin and 16-pin

port on the back of the radio. Connect the factory 24-pin and 16-pin harness into the female connectors on the NU-FRD1 harness.Plug the Black micro-t 24-pin

connector on the NU-FRD1 harness into the NU-FRD1.

Operation: Press the “Phone” button on the steering wheel controls (SWC) twice to activate the NU-FRD1. The navigation screen will display “Turn On

Navigation Unlock”. Press the “Yes” icon. The navigation screen will then display “Conrm Safe Passenger Use”. Press the “Yes” icon to acknowledge “safe use”,

agreeing that use will be performed only by the passenger whenever the vehicle is in motion, and activate the NU-FRD1. To de-activate the

NU-FRD1 simply press the “Phone” button on the SWC twice. The navigation screen will display “Navigation Unlock Deactivated”.

To activate the Reverse Camera Unlock feature, press the “Phone” button on the SWC twice. When the navigation screen displays “Turn On Navigation Unlock”

press the “No” icon. The navigation screen will then display “Turn On Reverse Camera Unlock”. Press the “Yes” icon. The navigation screen will then display

“Conrm Safe Passenger Use”. Press the “Yes” icon to acknowledge “safe use”, agreeing that use will be performed only by the passenger

whenever the vehicle is in motion, and activate the reverse camera unlock. To de-activate the reverse camera unlock simply press the “Phone” button on

the SWC twice. The navigation screen will display “Reverse Camera Unlock Unlock Deactivated”.

WARNING: In order to avoid distraction, which could lead to an accident, the driver should never utilize systems unlocked by the NU-FRD1 when the

vehicle is in motion. Even when operated by the passenger, the vehicle driver should maintain their attention on the road at all times.

The NU-FRD1 is a Navigation Unlock integration interface that allows the factory navigation features of

your Ford/Lincoln/Mercury radio or the reverse camera to be used by the passenger at anytime.

To VehicleTo Factory Radio

Connection Diagram

NUFRD1 Harness

MEDIA

VOL

Press Twice to

Enable/Disable

Navigation Unlock

1. Press Phone Button

Twice

2. Screen Displays

Turn On Navigation

Unlock

3. Press Yes

4. Screen Displays

Conrm Safe

Passenger Use

5. Press Yes

6. Press Phone Button

Twice to De-Activate

Navigation Unlock

1. Press Phone Button

Twice

2. Screen Displays

Turn On Navigation

Unlock

3. Press No

4. Screen Displays

Turn on Reverse

Camera Unlock

5. Press Yes

6.Screen Displays

Conrm Safe

Passenger Use

7. Press Yes

8.Press Phone Button

Twice to De-Activate

Reverse Camera Unlock

NU-FRD1 Controls

Installation & Operation

Installation/Compatibility Notes

DISCLAIMER: Under no circumstances shall the manufacture or the distributors of the NU-FRD1 be held liable for claims of any

loss or damage, consequential, direct or indirect, arising from the sale, installation, or use of the NU-FRD1. The manufacture

and its distributors will not, nor will they authorize any representative or any other individual, to assume obligation or liability in

relation to the NU-FRD1 other than its replacement.

AGREEMENT: End user agrees to use this product in compliance with the instructions and terms of use above and with all State

and Federal laws. PAC provides instructions and safety warnings with respect to this product and disclaims all liability for any use

not in conformity with those instructions or other misuse of its product. If you do not agree, please discontinue use immediately

and return product to place of purchase. This product is intended for off-road use and passenger use only.

1. The 2009 Lincoln MKS does not support the navigation unlock feature; only the reverse camera unlock will function in this vehicle.

2. It is reccomended that you set the Reverse Camera delay setting to Off for optimal performance.

3. If you are installing this interface in conjunction with a uPAC or aPAC module, the NU-FRD1 must be plugged into the the radio, then the uPAC or aPAC, then

the vehicle harness.