Panasonic DMP-BD93 Manual
Panasonic
Blu-ray afspiller
DMP-BD93
Læs nedenfor 📖 manual på dansk for Panasonic DMP-BD93 (4 sider) i kategorien Blu-ray afspiller. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/4
Thank you for purchasing this product.
Please read these instructions carefully before using
this product, and save this manual for future use.
A more detailed owner’s manual is available in
“Owner’s Manual (PDF format)”. To read it,
download it from the website.
http://av.jpn.support.panasonic.com/support/
global/cs/bd/oi/index.html
You will need Adobe Reader to browse or print the
Owner’s Manual (PDF format).
You can download and install a version of Adobe
Reader that you can use with your OS from the
following website. (As of December 2014)
http://www.adobe.com/products/acrobat/
readstep2.html
≥Product numbers are provided in these Owner’s Manual correct
as of December 2014. These may be subject to change.
≥
Do not use AC power supply cord and AC adaptor with other equipment.
≥Do not use any other AC power supply cords and AC adaptors
except the supplied one.
Using the remote control
– Insert the batteries to the terminal so that it (i
i
i
ii and j
j
j
jj)
matches those in the remote control.
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using this unit’s remote
control. Some buttons may not work depending on the TV.
[ÍTV] : Turn the TV on and off
[AV] : Change input
[ :i j VOL] Adjust the volume
3 Select title numbers, etc./Enter numbers or
[BDT270] characters
4 Cancel
5 Basic playback control buttons
6 Show Closed Caption setup screen
7 Show Pop-up menu/Top menu
8 Show Option menu
9 Colored buttons (red, green, yellow, blue)
Used for various purposes depending on the display.
10 Transmit the remote control signal
11 Open or close the disc tray
12 Show the status messages
13 [BDT270] Switch Secondary Video on/off (Picture-in-
picture)
14 Change soundtrack
15 [BDT270] Show MiracastTM screen
16 Show the Home Screen of Network Service
17 Exit the Menu screen
18 Show Netflix screen
19 Show HOME menu
20 [3 4 2 1, , , ] :
Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame
21 Return to previous screen
22 [BD93] Show Setup menu
1 Disc tray
2 USB port
3 POWER LED
The LED lights when the unit is turned on, and
flashes when error occurs.
4 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and right
5 Open or close the disc tray
6[BDT270] Stop
7[BDT270] Start play
8Standby/on switch (Í/I)
Press to switch the unit from on to standby mode
or vice versa. In standby mode, the unit still
consumes a small amount of power.
Basic Owner’s Manual
Blu-ray DiscTM Player
Model No. DMP-BDT270
DMP-BD93
Firmware updates
Panasonic is constantly improving the unit’s firmware
to ensure that our customers are enjoying the latest
technology.
Panasonic recommends updating your firmware as
soon as you are notified.
P PC
Unless otherwise indicated, illustrations in these
Owner’s Manual are of DMP-BDT270.
SQT0698-1
F1214JY1124
If you have any questions, visit :
U.S.A. : www.panasonic.com/support
Canada : www.panasonic.ca/english/support
Register online at www.panasonic.com/register
(U.S. customers only)
Accessories
Check the supplied accessories before using this unit.
1 Remote control
[BDT270] (N2QAYB001023)
[BD93] (N2QAYB001024)
2 Batteries for remote control
1[BDT270] AC power supply cord
(K2CB2YY00092)
1[BD93] AC adaptor (SAE0001)
[For_Canada]
The enclosed Canadian French label sheet corresponds to the
English display on the unit.
R6/LR6, AA
(Alkaline or manganese
batteries)
Control reference guide
1
2
3
5
4
6
7
20
8
9
21
19
17
16
18
15
14
13
12
11
10
34 14 16 12
22
1121
[BD93]
1 234
1 2 3 4
875 6
85
[BD93]
[BDT270]
Use category 5 or above straight LAN cables (STP) when connecting to peripheral devices.
Quick Start Guide
STEP 1 : Connecting to a TV
STEP 2 : Connecting to the network
∫
∫
∫
∫∫ Wireless LAN connection
HDMI IN
To an AC outlet
HDMI cable
AC power supply cord (supplied)
[BDT270]
[BD93]
AC adaptor (supplied)
[BDT270] [BD93]
This unit consumes a small amount of AC power (>“Specifications”) even when turned off in standby mode.
For the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
Wireless router, etc. Internet
[BDT270]
∫
∫
∫
∫∫ LAN cable connection
Broadband router, etc. Internet
LAN Cable
STEP 3 : Settings
21
HDMI
HDMI
TV
Turn on the TV and select the appropriate video
input.
Press [Í/I].
Follow the on-screen instructions to continue with
the settings.
STEP 4 : Playback
1 2
Insert the media. Press [OK] or [3421, , , ] to select the item.
≥If there are any other items, repeat this step.
The following functions may not work depending on the media and contents.
BD-Video : Video
BD-RE : Video,
JPEG, MPO*1,
AAC, ALAC, DSD*1, FLAC, MP3, WAV, WMA
BD-R : Video, MKV, Xvid*2,
AAC, ALAC, DSD*1, FLAC, MP3, WAV, WMA
DVD-Video : Video
DVD-R/DVD-R DL : Video, AVCHD, MKV, Xvid*2,
JPEG, MPO*1,
AAC, ALAC, DSD*1, FLAC, MP3, WAV, WMA
DVD-RW/+R/+RW/+R DL : Video, AVCHD
Music CD : Music [CD-DA]
CD-R/CD-RW : MKV, Xvid*2,
JPEG, MPO*1,
AAC, ALAC, FLAC, MP3, Music [CD-DA], WAV, WMA
USB devices (up to 4 TB) : MKV, MP4, MPEG2, Xvid*
2,
JPEG, MPO*1,
AAC, ALAC, DSD*1, FLAC, MP3, WAV, WMA
∫
∫
∫
∫∫ Region management information
The unit can play back BD-Video/DVD-Video discs of the following regions codes, including “ALL”:
≥The unit cannot playback discs in PAL format.
*1 [BDT270] only
*2 Canada only
≥Specifications are subject to change without notice.
Operating during playback
Stop Press [∫STOP].
The stopping point is memorized.
Resume play function
Press [1PLAY] to restart from this point.
≥The point is cleared if the media is removed.
Pause Press [ PAUSE].;Press [ PAUSE] again or [; 1PLAY] to restart play.
Search While playing, press [SEARCH6]
or [SEARCH5]. The speed increases up to 5 steps.
≥ 1Press [ PLAY] to revert to normal playback speed.
Slow-motion While paused, press
[SEARCH5].
Skip While playing or paused, press
[:] or [9]. Skip to the title, chapter or track.
Playable media
1
BD-Video DVD-Video
Example:
Firmware updates
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve the
way a feature operates. These updates are
available free of charge.
This unit is capable of checking the firmware
automatically when connected to the Internet via a
broadband connection.
When a new firmware version is available, the
following message is displayed.
You can also download the latest firmware from the
following website and store it to a USB device to
update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
DO NOT DISCONNECT the unit from the AC
power or perform any operation while the update
takes place.
After the firmware is installed, unit will restart and
the following screen will be displayed.
e.g.,
≥To show the firmware version on this unit;
[BDT270] [HOME] > “Setup” > “Player Settings” > “System” >
“System Information” > “Firmware Version Information”
[BD93] [SETTINGS] > “System” > “System Information”
> “Firmware Version Information”
≥
≥
≥
≥≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
≥If you do not want to check for the latest firmware version,
set “Automatic Update Check” to “Off”.
[BDT270] [HOME] > “Setup” > “Player Settings” > “System” >
“Firmware Update”
[BD93] [SETTINGS] > “System” > “Firmware Update”
Specifications
Firmware Update
Current Version: X.XX
New Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.jp/support/global/cs/
Yes No
OK
RETURN
The firmware was updated.
Current Version:
x.xx
RETURN
Power supply
[BDT270] AC 120 V, 60 Hz
[BD93] DC 12 V, 0.8 A (DC IN
terminal)
Power
consumption
[BDT270] Approx. 13 W
[BD93] Approx. 11 W
Power
consumption in
standby mode
Approx. 0.5 W
Power consumption
in quick start
standy mode
[BDT270] Approx. 5 W
[BD93] Approx. 3.5 W
Dimensions
(Wk
k
k
kkHk
k
k
kkD)
[BDT270] 312 mmk k43 mm 180 mm
(Approx. 12 5/16zk1 11/16zk7 2/16z)
[BD93] 245 mmk38.5 mmk175 mm
(Approx. 9 10/16zk1 8/16zk6 14/16z)
Mass (Weight) [BDT270]
Approx. 1.0 k
g
(2.2 lbs)
[BD93] Approx. 0.8
k
g
(1.7 lbs)
Produkt Specifikationer
| Mærke: | Panasonic |
| Kategori: | Blu-ray afspiller |
| Model: | DMP-BD93 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Panasonic DMP-BD93 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Blu-ray afspiller Panasonic Manualer
10 December 2024
29 Oktober 2024
31 August 2024
26 August 2024
26 August 2024
19 August 2024
19 August 2024
12 August 2024
29 Juli 2024
25 Juli 2024
Blu-ray afspiller Manualer
- Blu-ray afspiller Sony
- Blu-ray afspiller Samsung
- Blu-ray afspiller Philips
- Blu-ray afspiller Lenco
- Blu-ray afspiller LG
- Blu-ray afspiller Pioneer
- Blu-ray afspiller Sharp
- Blu-ray afspiller Harman Kardon
- Blu-ray afspiller Grundig
- Blu-ray afspiller Asus
- Blu-ray afspiller Toshiba
- Blu-ray afspiller Pyle
- Blu-ray afspiller Denon
- Blu-ray afspiller Yamaha
- Blu-ray afspiller Nedis
- Blu-ray afspiller JVC
- Blu-ray afspiller Hitachi
- Blu-ray afspiller Cambridge
- Blu-ray afspiller Oppo
- Blu-ray afspiller NAD
- Blu-ray afspiller Tascam
- Blu-ray afspiller Onkyo
- Blu-ray afspiller Marantz
- Blu-ray afspiller McIntosh
- Blu-ray afspiller RCA
- Blu-ray afspiller VIZIO
- Blu-ray afspiller Laser
- Blu-ray afspiller Sherwood
- Blu-ray afspiller Peaq
- Blu-ray afspiller Verbatim
Nyeste Blu-ray afspiller Manualer
15 November 2024
14 November 2024
13 Oktober 2024
19 September 2024
6 September 2024
5 September 2024
5 September 2024
2 September 2024
31 August 2024
28 August 2024