Panasonic TX-43HX700B Manual

Panasonic televisión TX-43HX700B

Læs nedenfor 📖 manual på dansk for Panasonic TX-43HX700B (35 sider) i kategorien televisión. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/35

OPERATING INSTRUCTIONS

TX-43HX700B / TX-43HX700BZ / TX-43HX710B

TX-50HX700B / TX-50HX700BZ / TX-50HX710B

TX-55HX700B / TX-55HX700BZ / TX-55HX710B

TX-65HX700B / TX-65HX700BZ / TX-65HX710B

LED TV

You can find instructions for your TV’s features in the E-Manual.

To access the , enter menu, select and press E-Manual Settings Manuals

OK Home/Menu Info. For quick access press button and then button.

e-MANUAL

English - 3 -

WARNING

Do not ingest the battery, Chemical Burn Hazard

This product or the accessories supplied with the prod -

uct may contain a coin/button cell battery. If the coin/

button cell battery is swallowed, it can cause severe

internal burns in just 2 hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely,

stop using the product and keep it away from children.

If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medical attention.

– – – – – – – – – – – –

Warning Stability Hazard

A television may fall, causing serious personal injury

or death. Many injuries, particuIarly to children, can be

avoided by taking simple precautions such as:

• ALWAYS use cabinets or stands or mounting

methods recommended by the manufacturer of the

television set.

• ALWAYS use furniture that can safely support the

television set.

• ALWAYS ensure the television set is not overhanging

the edge of the supporting furniture.

• ALWAYS educate children about the dangers of

climbing on furniture to reach the television set or

its controls.

• ALWAYS route cords and cables connected to your

television so they cannot be tripped over, pulled or

grabbed.

• NEVER place a television set in an unstable location.

• NEVER place the television set on tall furniture

(for example, cupboards or bookcases) without

anchoring both the furniture and the television set

to a suitable support.

• NEVER place the television set on cloth or other

materials that may be located between the television

set and supporting furniture.

• NEVER place items that might tempt children to

climb, such as toys and remote controls, on the top

of the television or furniture on which the television

is placed.

If the existing television set is going to be retained and

relocated, the same considerations as above should

be applied.

– – – – – – – – – – – –

Apparatus connected to the protective earthing of the

building installation through the MAINS connection or

through other apparatus with a connection to protective

earthing – and to a television distribution system using

coaxial cable, may in some circumstances create a re

hazard. Connection to a television distribution system

has therefore to be provided through a device providing

electrical isolation below a certain frequency range

(galvanic isolator)

WALL MOUNTING WARNINGS

• Read the instructions before mounting your TV

on the wall.

• The wall mount kit is optional. You can obtain from

your local dealer, if not supplied with your TV.

• Do not install the TV on a ceiling or on an inclined

wall.

• Use the specied wall mounting screws and other

accessories.

• Tighten the wall mounting screws rmly to prevent

the TV from fall. Do not over-tighten the screws.

WARNING

• Using other wall-hanging brackets, or installing

a wall-hanging bracket by yourself have the risk

of personal injury and product damage. In order

to maintain the unit’s performance and safety, be

absolutely sure to ask your dealer or a licensed

contractor to secure the wall-hanging brackets.

Any damage caused by installing without a

qualied installer will void your warranty.

• Carefully read the instructions accompanying

optional accessories, and be absolutely sure to

take steps to prevent the TV from falling o󰀨.

• Handle the TV carefully during installation since

subjecting it to impact or other forces may cause

product damage.

• Take care when xing wall brackets to the wall.

Always ensure that there are no electrical cables

or pipes in the wall before hanging bracket.

• To prevent fall and injury, remove the TV from

its xed wall position when it is no longer in use.

Figures and illustrations in this user manual are

provided for reference only and may di󰀨er from the

actual product appearance. Product design and

specications may be changed without notice.

English - 4 -

• Make sure not to scratch or break the TV.

CAUTION: Please refrain from inserting pictured screws to the

TV body when not using the TV stand e.g. wall hanging. Inserting

screws without pedestal may cause a damage of the TV.

Assembling the pedestal

1. The stand of the TV consists of 4 pieces. Install

these pieces together.

M4 x 12mm

M6 x 20 mm

2. Place the stand(s) on the stand mounting

pattern(s) on the rear side of the TV.

3. Insert the screws provided and tighten (M4 x 12)

them gently until the stand is properly tted.

M6 x 20 mm

43” 50/55/65”

M4 x 12 mm

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way

when using the wall-hanging bracket or repacking

the TV.

Maintenance

First, remove the mains plug from the mains

socket.

Display panel, Cabinet, Pedestal

Regular care:

Gently wipe the surface of the display panel, cabinet,

or pedestal by using a soft cloth to remove dirt or

ngerprints.

For stubborn dirt:

1. First clean the dust from the surface.

2. Dampen a soft cloth with clean water or diluted

neutral detergent (1 part detergent to 100 parts

water).

3. Wring out the cloth rmly. (Please note, do not

let liquid enter the TV inside as it may lead to

product failure.)

4. Carefully wipe moisten and wipe away the

stubborn dirt.

5. Finally, wipe away all the moisture.

Caution

Do not use a hard cloth or rub the surface too hard,

otherwise this may cause scratches on the surface.

• Take care not to subject the surfaces to insect

repellent, solvent, thinner or other volatile substances.

This may degrade surface quality or cause peeling

of the paint.

• The surface of the display panel is specially treated

and may be easily damaged. Take care not to tap

or scratch the surface with your ngernail or other

hard objects.

• Do not allow the cabinet and pedestal to make

contact with a rubber or PVC substance for a long

time. This may degrade surface quality.

Mains plug

Wipe the mains plug with a dry cloth at regular

intervals.

Moisture and dust may cause re or electrical shock.

Assembling / Removing

the pedestal

Preparations

Take out the pedestal(s) and the TV from the packing

case and put the TV onto a work table with the screen

panel down on the clean and soft cloth (blanket, etc.)

• Use a at and rm table bigger than the TV.

• Do not hold the screen panel part.

English - 5 -

Introduction

Thank you for choosing our product. You’ll soon be

enjoying your new TV. Please read these instructions

carefully. They contain important information which will

help you get the best from your TV and ensure safe

and correct installation and operation.

Accessories Included

• Remote Control

• Batteries: 2 x AAA

• Instruction Book

• Detachable stand

• Stand mounting screws (M4 x 12) + (M6 x 20)

Features

• Remote controlled colour TV

• Android TM operating system

• Google Cast

• Voice Search (Optional)

• Fully integrated digital terrestrial/cable/satellite TV

(DVB-T-T2/C/S-S2)

• HDMI inputs to connect other devices with HDMI

sockets (HDMI upport)2.1a s

• USB input

• Composite inputs for external devices (such as DVD

Players, PVR, video games, etc.)

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Sleep timer

• On/O󰀨 timer

• Switch o󰀨 timer

• Picture o󰀨 function

• No signal auto power o󰀨 function

• VGA input

• Ethernet (LAN) for Internet connectivity and service

• 802.11 a/b/g/n/ac built in WLAN Support

• HbbTV

Ultra HD (UHD)

TV supports Ultra HD (Ultra High Denition - also

known as 4K) which provides resolution of 3840 x

• Put the TV onto a work table with the screen panel

down on the clean and soft cloth. Leave the stand(s)

protruding over the edge of the surface.

• Unsrew the screws that xing the stand(s).

• Remove the stand(s).

When using the

wall-hanging bracket

Please contact your local Panasonic dealer to

purchase the recommended wall-hanging bracket.

Holes for wall-hanging bracket installation;

Rear of the TV

43” 50” 55” 65”

a (mm) 100 200 200 400

b (mm) 100 200 200 200

View from the side

VESA

Bracket

(d)

43” 50”, 55”, 65”

Depth of screw (c) min. 9 mm 12 mm

max. 10 mm 15 mm

Diameter M4 M6

Note: The screws for xing the TV onto the wall-hanging

bracket are not supplied with the TV.

English - 6 -

2160 (4K:2K). It equals 4 times the resolution of Full

HD TV by doubling the pixel count of the Full HD TV

both horizontally and vertically. Ultra HD contents are

supported from HDMI, some of the Over-the-Top (OTT)

services, USB inputs and over DVB-T2 and DVB-S2

broadcasts.

High Dynamic Range (HDR) / Hybrid Log-

Gamma (HLG)

Using this feature the TV can reproduce greater

dynamic range of luminosity by capturing and then

combining several di󰀨erent exposures. HDR/HLG

promises better picture quality thanks to brighter, more

realistic highlights, more realistic colour and other

improvements. It delivers the look that lmmakers

intended to achieve, showing the hidden areas of

dark shadows and sunlight with full clarity, colour and

detail. HDR/HLG contents are supported via native

and market applications, HDMI, USB inputs and

over DVB-S broadcasts. When the input source is

set to the related HDMI input press the button Menu

and s t te he HDMI EDID Version option in the TV

Options>Settings>Device Preferences>Inputs

menu as or EDID 2.0 Auto EDID in order to watch

HDR/HLG content, if the HDR/HLG content is received

through an HDMI input. The source device should also

be at least HDMI 2.0a compatible in this case.

Dolby Vision

Dolby Vision™ delivers a dramatic visual experience,

astonishing brightness, exceptional contrast, and vivid

colour, that brings entertainment to life. It achieves this

stunning image quality by combining HDR and wide

colour gamut imaging technologies. By increasing the

brightness of the original signal and using a higher

dynamic colour and contrast range, Dolby Vision

presents amazing true-to-life images with stunning

detail that other post-processing technologies in the

TV aren’t able to produce. Dolby Vision is supported

via native and market applications, HDMI and USB in-

puts. When the input source is set to the related HDMI

input press the button and s t tMenu e he HDMI EDID

Version Settings>Device option in the TV Options>

Preferences>Inputs menu as or EDID 2.0 Auto EDID

in order to watch HDR/HLG content, if the HDR/HLG

content is received through an HDMI input. The source

device should also be at least HDMI 2.0a compatible in

this case. In the Picture Mode menu two predened

picture modes will be available if Dolby Vision content

is detected: and Dolby Vision Bright Dolby Vision

Dark. Both allow the user to experience the content

in the way the creator originally intended with di󰀨erent

ambient lighting conditions. To change the Picture

Mode Menu setting press the button while watching the

Dolby Vision content and go to menu. Picture While

watching Dolby Vision Content via an application,

except YouTube, Netix and Multi Media Player, you

will not be able to access the menu and set Picture

the .Picture Mode

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL

INPUT (ANT) socket or satellite plug to the SATELLITE

INPUT (LNB) socket located on the rear side of the TV.

Rear side of the TV

LNB

ANT

1. Satellite

2. Aerial or cable

If you want to connect a device to the TV, make

sure that both the TV and the device are turned o󰀨

before making any connection. After the connection

is done, you can turn on the units and use them.

English - 7 -

Other Connections

If you want to connect a device to the TV, make sure that both the TV and the device are turned o󰀨 before making

any connection. After the connection is done, you can turn on the units and use them.

Connector Type Cables Device

COMPONENT Component

Video

Connection

(back) VGA to Connection CableComponent

HDMI

Connection

(back&side)

VGA

Connection

(back)

AUDIO IN

VGA/

Component

Audio

Connection

(back) Component/VGA Audio Cable

SPDIF SPDIF

(Optical Out)

Connection

(back)

COMPOSITE Composite

(Audio/Video)

Connection

(back) Audio Video Cable

HEADPHONE Headphone

Connection

(side)

USB

Connection

(side)

Connection

(side)

CAM

module

LAN Ethernet

Connection

(back) LAN / Ethernet Cable

To enable VGA/Component audio,

you will need to use the back audio

inputs with a VGA/Component audio

cable for audio connection. When

using the wall mounting kit (contact

your dealer to purchase one, if not

supplied), we recommend that you

plug all your cables into the back of

the TV before mounting on the wall.

Insert or remove the CI module only

when the TV is SWITCHED OFF. You

should refer to the module instruction

manual for details of the settings. The

USB inputs on the TV support devices

up to 500mA. Connecting devices that

have current value above 500mA may

damage your TV. When connecting

equipment using a HDMI cable to your

TV, to guarantee sucient immunity

against parasitic frequency radiation

and trouble-free transmission of high

denition signals, such as 4K content,

you have to use a high speed shielded

(high grade) HDMI cable with ferrites.

English - 9 -

Remote Control

15 16

Note: Other Panasonic devices cannot be operated with

this remote.

Inserting the Batteries into the Remote

Remove the screw that secure the battery compartment

cover on the back side of the remote control rst. Lift

the cover gently. Insert two 1.5V - size batteries. AAA

Make sure the (+) and (-) signs match (observe correct

polarity). Do not mix old and new batteries. Replace

only with same or equivalent type. Place the cover back

on. Then screw the cover back on again.

To pair remote with the TV

When TV is turned on for the rst time, a search for

accessories will be performed before the initial setup

starts. You will need to pair your remote control with

your TV at this point.

Press and hold the button on the remote for Source

about 5 seconds, the LED on the remote will light up.

Then release the button, the LED will start Source

to blink. That means the remote is in pairing mode.

Now you will wait the TV to nd your remote. Select the

name of your remote and press when it appears OK

on the TV screen.

When the paring process was successful, the LED

on the remote will go o󰀨. If the pairing process fails

the remote will enter to sleep mode after 30 seconds.

1. Standby: Quick Standby / Stanby / On

2. Numeric buttons: Switches the channel in Live TV

mode, enters a number or a letter in the text box on

the screen

3. Language: Switches among sound modes (analogue

TV), displays and changes audio language (digital TV,

where available)

4. Volume +/-

5. Microphone: Activates the microphone on the remote

6. Home: Opens the Home Screen

7. Guide: Displays the electronic programme guide in

Live TV mode

8. OK: Conrms selections, enters to sub-menus, views

channel list (in Live TV mode)

9. Back/Return: Returns to previous menu screen, goes

one step back, closes open windows, closes teletext (in

Live TV-Teletext mode)

10. Netix: Launches the Netix application

11. Menu: Displays Live TV Settings menu in Live TV mode

12. :Coloured Buttons Follow the on-screen instructions for

coloured button functions

13. Rewind: Moves frames backwards in media such as

movies

14. Stop: Stops the media being played

15. No function

16. Pause: Pauses the media being played

Play: Starts to play selected media

17. Text: Opens and closes teletext (where available in

Live TV mode)

18. Fast forward: Moves frames forward in media such

as movies

19. Source: Shows all available broadcast and content

sources in Live TV mode

20. Freeview Play: Connects to the Freeview Play platform

where you can access available catch-up TV services

21. Exit: Closes and exits from displayed Live TV Settings

menus, closes the Home Screen

22. Directional buttons: Navigates menus, setting options,

moves the focus or cursor etc. and displays the subpages

in Live TV-Teletext mode when pressed Right or Left.

Follow the on-screen instructions.

Note: Directional buttons are positioned on the circle

around the OK button.

23. Info: Displays information about on-screen content

24. Programme +/-: Increases/Decreases channel number

in Live TV mode

25. Mute: Completely turns o󰀨 the volume of the TV

26. Subtitles: Turns subtitles on and o󰀨 (where available)

Standby Button

Press and hold the button on the remote Standby

control. Power o󰀨 dialogue will appear on the screen.

Highlight OK and press the OK button. The TV will

switch into standby mode. Press briey and release

to switch the TV into quick standby mode or to switch

on the TV when in quick standby or standby mode.

English - 10 -

Initial Setup Wizard

Note: Follow the on-screen instructions to complete the initial

setup process. Use the directional buttons and the button OK

on the remote to select, set, conrm and proceed.

When turned on for the rst time, a search for acces-

sories will be performed before the initial setup starts.

Follow the on-scree o pair your remote n instructions t

control (depends on the model of the remote control)

and other wireless accessories with your TV. Press

Back/Return button to end adding accessories and

start the setup.

1. Welcome Message and Language Selection

“Welcome” message will be displayed along with

the language selection options listed on the screen.

Select the desired language from the list and press

OK to continue.

2. Quick Setup

If you didn’t priorly connect your TV to the internet via

Ethernet a screen will be displayed where you can

transfer your Android phone’s WLAN network and

Google Account to your TV. Highlight and Continue

press OK to proceed. Follow the on-screen instructions

on your TV and your phone to complete the process.

You can also skip this step by selecting option. Skip

Some steps may be skipped depending on the settings

made in this step.

If you did priorly connect your TV to the internet via

Ethernet a message will be displayed stating that you

are connected. You can choose to continue with wired

connection or change the network. Highlight Change

network OK and press if you want to use wireless

connection instead of wired connection.

3. Network Connection

You will be directed to the next step automatically, if you

connect your TV to internet via Ethernet at this point. If

not, available wireless networks will be searched and

listed on the next screen. Select your WLAN network

from the list and press to connect. Enter the OK

password using the virtual keyboard if the network is

password protected. Select the option Other network

from the list, if the network that you want to connect

has hidden SSID.

If you prefer not to connect to the internet at this point

you can skip this step by selecting Skip option. You

can connect to internet later using the Network &

Internet Settingsmenu options in the menu from

the Home Screen or from the menu in TV options

Live TV mode.

This step will be skipped if internet connection has

been established in the previous step.

4. Sign in to your Google account

If connection succeeds, you can sign in to your Google

account on the next screen. You need to be signed in

to a Google account in order to use Google services.

This step will be skipped if no internet connection has

been established in the previous step or if you already

signed in to your Google account in Quick Setup step.

By signing in, you will be able to discover new

apps for videos, music and games on Google Play;

get personalised recommendations from apps like

YouTube; buy or rent the newest movies and shows on

Google Play Movies & TV; access your entertainment

and control your media. Highlight and press Sign In

OK to proceed. Sign-in options are as following:

• Use your phone or computer: You can use a

browser on your phone or computer to sign in.

Highlight this option and press OK button. A code

will be displayed on the TV screen. Make sure your

phone or computer is on the same network as your

TV. Open the given website (androidtv.com/setup,

follow on-screen instructions for the up-to-date

website url) in your phone’s or computer’s browser

and enter the code you see on your TV screen into

the related entry eld. Then follow the instructions

on your device and complete the process.

• Use your remote: Using this option you can sign in to

your Google account by entering your e-mail address

or phone number and your password.

If you prefer not to sign in to your Google account at this

point you can skip this step by selecting option.Skip

5. Terms of Service

continuing, you will agree to the Google Terms of

Service, the Google Privacy Policy and the Google

Play Terms of Service. Highlight and press Accept

OK on the remote to conrm and proceed. You can

also view Terms of Service Privacy Policy, and

Play Terms of Service on this screen. To display the

content an internet connection is needed. A message

will be displayed mentioning the web site address on

which this information can also be viewed, in case

internet access is not available.

6. Location

On the next screen, you can allow or disallow Google

and third party apps to use your TV’s location informa -

tion. Select Yes to conrm and press OK. To skip this

step without conrmation, select No and proceed by

pressing the button. You can change this setting OK

later using the Settings>Device Preferences>Loca-

tion menu on the Home Screen.

7. Help improve Android

Automatically send diagnostic information to Google,

like crash reports and usage data from your device

and apps. This information won't be used to identify

you. Select Yes to conrm and press OK. To skip this

step without conrmation, select No and proceed by

pressing the button. You can change this setting OK

Produkt Specifikationer

Mærke:	Panasonic
Kategori:	televisión
Model:	TX-43HX700B

Har du brug for hjælp?

Hvis du har brug for hjælp til Panasonic TX-43HX700B stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

televisión Panasonic Manualer

Panasonic Viera TH-42PX45B Manual

12 Januar 2025

Panasonic TB-32S45 Manual

6 Januar 2025

Panasonic TV-65W93AE8 Manual

4 Januar 2025

Panasonic TB-55W60AEY Manual

25 December 2024

Panasonic TB-50W60AEY Manual

25 December 2024

Panasonic TB-43W60AEY Manual

25 December 2024

Panasonic TH-50JX700K Manual

21 December 2024

Panasonic TV-65W95AEB Manual

20 December 2024

Panasonic TV-85W95AP Manual

19 December 2024

Panasonic TV-55W95AP Manual

19 December 2024

televisión Manualer

Nyeste televisión Manualer

Thomson 40FA2S13 Manual

20 Februar 2025

Continental Edison CELED65SVQLD25B6 Manual

19 Februar 2025

Continental Edison CELED32SVHD25B6 Manual

19 Februar 2025

TCL 55P8K Manual

10 Februar 2025

Thomson 32FG2S14 Manual

5 Februar 2025

TCL 85C75B Manual

30 Januar 2025

Samsung 75DU7100 Manual

30 Januar 2025

Philips 32HFL2889T Manual

15 Januar 2025

Philips 25CE6270 Manual

15 Januar 2025

Grundig st 84 899 dolby Manual

15 Januar 2025