Planet PWR-75-24 Manual

Planet Computer adapter PWR-75-24

Læs nedenfor 📖 manual på dansk for Planet PWR-75-24 (3 sider) i kategorien Computer adapter. Denne guide var nyttig for 32 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/3

- 1 - - 2 - - 3 - - 4 -

DC Single Output Industrial

DIN Rail Power Supply

PWR-40-24 / PWR-60-24

PWR-75-24 / PWR-120-48

PWR-240-48 / PWR-480-48

User's Manual

1. Package Contents

Thanks for purchasing DC Single Output Industrial DIN Rail

Power Supply units from PLANET technology; the DC Single

Output Industrial DIN Rail Power Supply units can transform AC

power into DC power output for PLANET Industrial equipment.

The following models come with the DC Single Output Industrial

DIN Rail Power Supply units:

PWR-40-24 (MEAN WELL / MDR-40-24): l 40W 24V DC

Single Output Industrial DIN Rail Power Supply

(-20 ~ 70 degrees C)

PWR-60-24 l 60W 24V DC (MEAN WELL / MDR-60-24):

Single Output Industrial DIN Rail Power Supply

(-20 ~ 70 degrees C)

PWR-75-24 (MEAN WELL / DR-75-24): l 75W 24V DC

Single Output Industrial DIN Rail Power Supply

(-10 ~ 60 degrees C)

PWR-120-48 (MEAN WELL / DR-120-48): l 120W 48V DC

Single Output Industrial DIN Rail Power Supply

(-10 ~ 60 degrees C)

PWR-240-48 (MEAN WELL / DR-240-48): l 240W 48V DC

2. Requirements

The DC Single Output Industrial DIN Rail Power Supply units

are designed for providing DC power to PLANET Industrial

equipment. For AC power input and DC power output from

DC Single Output Industrial DIN Rail Power Supply units, the

following equipment is necessary for further installation.

AC Power Cord Cable x 1 l

Terminal Block Connector within Two DC Power Inputs Wires l

Cutting Tools: Long Nose Pliers and Pen Knife l

Note

1. Before working on the device, please make

sure power cord has been unplugged from

power outlet.

2. PLANET DIN-Rail power supply series is for

indoor only.

3. PLANET DIN-Rail power supply series must

be earthed.

3. AC Power Cord Cable Installation

The DC Single Output Industrial DIN Rail Power Supply unit

power requirement is 100-240V AC, 50/60Hz with power input

lines. Suggest use standard AC Power Cord Cable.

Step 1: Use pen knife to cut open the AC Power Cord Cable.

Step 2: Open the AC Power Cord Cable and there are 3 lines

inside.

Step 4: Make sure the lines are not disorderly and confused.

Step 5: Please verify the 3 lines, which are live line, null line

and earth line.

Note

The standard AC power cord, live line is black,

null line is white and earth line is green. Please

verify these 3 lines from your AC power cord

before starting the following procedures.

Live line Black color

Null line White color

Earth line Green color

Wiring the AC Power Input:

: Earth line.

: Null line.

: Live line.

Note

1. Please do not connect the power plug of the

power cable to a standard wall outlet during

this installation.

2. The example is based on PWR-40-24 for

PWR-75-24, PWR-120-48, PWR-240-48 and

PWR-480-48.

The indication will be the same, but a

different location.

Step 7: Please connect the power plug of the power cable to

a standard wall outlet, then it will power on the DC

Single Output Industrial DIN Rail Power Supply units.

When the DC Single Output Industrial DIN Rail Power Supply

units receive power, the “DC OK” LED should remain solid

Green.

Figure 2. "DC OK" LED of DC Single Output Industrial DIN Rail Power

Supply units.

Single Output Industrial DIN Rail Power Supply

(-10 ~ 70 degrees C)

PWR-480-48 (MEAN WELL/ SDR-480-48): l 480W 48V DC

Single Output Industrial DIN Rail Power Supply

(-25 ~ 70 degrees C)

Note

Strongly recommend to use 24V DC Single

Output Industrial DIN Rail Power Supply units

for Industrial Non-PoE equipment; 48V DC

Single Output Industrial DIN Rail Power Supply

units for Industrial PoE equipment.

The box should contain the following items:

The DC Single Output Industrial DIN Rail Power Supply Unit l

x 1

This User’s Manual x 1 l

If any item is found missing or damaged, please contact your

local reseller for replacement.

Step 3: Use Long Nose Pliers to remove the cover of 3 lines.

Step 6: Please connect the live line, null line and earth line to

the corresponding location.

Figure 1. Connect the 3 lines from AC Power Cord Cable to the

corresponding location.

Note

1. The example is based on PWR-40-24 for

PWR-75-24, PWR-120-48, PWR-240-48 and

PWR-480-48. The DC OK indication will be

the same, but in a different location.

2. +V ADJ. for O/P voltage adjustment (PWR-

40-24 / PWR-60-24 / PWR-480-48 only),

the range is 24V to 30V for PWR-40-24 /

PWR-60-24 and 48V to 55V for PWR-480-

48. Adjustable with screwdriver and voltage

measure with multimeter.

Warning

For PWR-120-48, one 115V AC / 230V AC

adjustable DIP switch is located on the bottom

of front panel. One 115V AC / 230V AC adjust-

able DIP switch (PWR-120-48 only), this is for

system input voltage selection. Please assure

the setting of AC DIP switch with local voltage

is compatible; otherwise, it will cause device

damage.

115V AC for 100V to 120V AC input voltage.

230V AC for 200V to 240V input voltage.

Produkt Specifikationer

Mærke:	Planet
Kategori:	Computer adapter
Model:	PWR-75-24
Vekselstrømsindgangsspænding:	100 - 240 V
Vekselstrømsindgangsfrekvens:	50 - 60 Hz
Bredde:	55 mm
Dybde:	100 mm
Højde:	125 mm
Vægt:	600 g
Produktfarve:	Blue,Grey
Strøm:	75 W
Opbevaringstemperatur (T-T):	-20 - 85 °C
Relativ luftfugtighed ved drift (H-H):	20 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	10 - 95 %
Driftstemperatur (T-T):	-10 - 60 °C
Antal:	1
Certificering:	UL508, TUV EN60950-1
Udgangsspænding:	24 V
Harmoniseret systemkode (HS):	84733020
DC indgangsspænding:	120 - 370 V
Indgangsstrøm:	1.45 A
Total effekt:	75 W
Strømbeskyttelsesfunktioner:	Over voltage, Overheating, Overload, Short circuit
Sikkerhed:	Ul508, TUV EN60950-1
Kølingstype:	Passiv
DIN-skinne montering:	Ja
Udgående strøm:	3200 mA