Praktica ATDCMSS Manual


Læs nedenfor 📖 manual på dansk for Praktica ATDCMSS (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Digiscoping Camera Mount
Attach your camera to your spotting scope in a matter of seconds and take photographs at long range.
All you need is a digital camera, a spotting scope with an an eyepiece diameter 28-42mm and the
PRAKTICA Digiscoping Camera Mount.
Set up is easy, just follow these simple steps!
1. Setup your spotting scope on a tripod.
2. Insert the spotting scope eyepiece into the digiscoping mount and tighten Wheel A until the mount is secure.
3. Focus the spotting scope.
4. Attach screw B on the digiscoping mount to the bottom of your camera using Wheel C.
5. Move the camera to the furthest position away from the scope and turn on the camera so that the lens is fully extended.
6. Move the camera towards the spotting scope lens and adjust the position of the camera platform using Wheel D and E.
The camera lens needs to be perfectly aligned and as close as possible to the spotting scope without the lenses touching.
You should be able to see a small image on the LCD screen or camera viewfinder with vignette on surrounding areas.
7. When your camera is in the correct position tighten Wheel F and G.
8. To reduce the vignette, zoom in onto the subject via the camera and refocus the spotting scope. Allow the camera a
moment to adjust and begin taking photographs.
Digiscoping Camera Adapter
Wheel A
Wheel F
Wheel C
Wheel G
Wheel D
Screw B
Wheel E


Produkt Specifikationer

Mærke: Praktica
Kategori: Ikke kategoriseret
Model: ATDCMSS

Har du brug for hjælp?

Hvis du har brug for hjælp til Praktica ATDCMSS stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Praktica Manualer

Praktica

Praktica ATDCMSS Manual

20 August 2024
Praktica

Praktica ATCAT2SS Manual

19 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024