ProLine II ProGrid 92343 Manual

ProLine II Stol ProGrid 92343

Læs nedenfor 📖 manual på dansk for ProLine II ProGrid 92343 (2 sider) i kategorien Stol. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

92343

FAUTEUIL DE DIRECTION À DOSSIER ProGrid®

INSTRUCTIONS DE MONTAGE

LIMITED WARRANTY

Pro-Line II chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:

• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.

• 3 Years on upholstery fabric and foam against wear and deterioration.

To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain return authorization.

At it’s option Ofﬁce Star Products will:

(a) Supply compatible components of current manufacture.

(b) Repair the customer’s component. The customer must prepay freight on any components returned to the factory.

Return freight on components still in warranty will be paid by Ofﬁce Star Products.

*All warranties are limited to the original purchaser for normal commercial usage deﬁned as a standard forty hour work week by persons weighing 250 lbs. or

less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other

event beyond the control of Ofﬁce Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or

consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a ﬁve

year warranty on all parts applies. Fabric and foam is warranted for one year. This warranty gives you speciﬁc legal rights, and you may also have other rights

which vary from state to state.

Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts

are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail

parts@ofﬁcestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00

p.m. Paciﬁc Time.

92343

ProGrid BACK MANAGER’S CHAIR

OPERATING INSTRUCTIONS

FEATURES

• PNEUMATIC SEAT HEIGHT ADJUSTMENT

To raise seat remove pressure from seat and pull lever (1) up.

To lower seat height sit on chair and pull lever (1) up.

• SEAT ANGLE ADJUSTMENT

To adjust seat angle lift lever (2). Leave lever up for free ﬂoat or

push lever down to lock.

• BACKREST ANGLE ADJUSTMENT

To adjust back angle lift lever (3). Leave lever up for free ﬂoat or

push lever down to lock at any angle.

• RATCHET BACK HEIGHT ADJUSTMENT

To adjust the height of the backrest lift upward. Once backrest

reaches its highest position it returns to the bottom to be moved

upward again.

• ARM HEIGHT ADJUSTMENT

To adjust arm height, push buttom (4) to allow the arms to move

up or down freely. Release buttom (4) once the desired

height is reached.

WARNING

1. Use this product only one person at a time.

2. Do not use this chair unless all bolts screws and knobs are

securely tightened.

3. Check that all bolts screws and knobs are tight every three

months or as needed.

4. Do not overturn back tilt knob when decreasing tension.

5. Dispose of packing material properly. Do not use plastic cover

as head covering. It may cause suffocation.

6. Do not use chair as a stepladder.

7. Use this chair for its intended purpose only.

8. Use mild detergent only for cleaning.

Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués

sur la liste et vériﬁer les quantités des pièces.

ÉTAPE 1 Insérer cinq roulettes (2) dans la base (1), les pousser très fort jusqu’à ce que vous entendiez ou sentiez la roulette (2) s’enclencher. Insérer le

cylindre pneumatique avec les soufﬂets (3) dans la base (1).

ÉTAPE 2

Aligner les trous des bras (8L et 8R) sur les trous du coussin du siège (6), ﬁxer les bras (8L et 8R) au moyen d’un bouton (15), d’une rondelle

plate (9) et d’une rondelle (10) pour chaque bras (8), VISSER COMPLÈTEMENT TOUS LES BOUTONS (15).

ÉTAPE 3

Fixer le mécanisme (5) au coussin du siège (6) avec la ﬂèche vers l’avant du siège avec six vis du mécanisme (11),

RESSERRER COMPLÈTEMENT TOUTES LES VIS.

ÉTAPE 4

Fixer le support du dossier (17) au dossier (7) au moyen d’une vis courte de support du dossier (12), ﬁxer le couvercle en plastique (16) sur le

support du dossier (17) avec deux vis pour le couvercle en plastique (14). Insérer le support du dossier (17) dans l’arrière du mécanisme (5) et ﬁxer avec

vis longue de support du dossier (13).

RESSERRER COMPLÈTEMENT TOUTES LES VIS.

ÉTAPE 5 Placer le siège assemblé sur le cylindre pneumatique (3) et mettre de la pression vers le bas.