Prologue K0391 Manual

Prologue Ikke kategoriseret K0391

Læs nedenfor 📖 manual på dansk for Prologue K0391 (5 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/5
GREAT BRITAIN • CUSTOMER SERVICE tel: 0845 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
1
2
3
4
5
6
7
8
9
10 11
12
13
14
15
16
17
18
19
20
21
22
23
24
20140623
Wireless thermometer w/hygrometer
Art.no 36-4742 Model 91904 (K0391)
Please read theentire instruction manual before using and save it for future use. Weapologise
for any text or photo errors and any changes of technical data. Ifyou have any questions
concerning technical problems please contact our Customer Service Department.
Safety
• Do not expose thedevice to extreme temperatures or damp.
• Avoid contact with corrosive materials.
• Never expose thedevice to dust.
• Do not dismantle thedevice.
Product description
Wireless sensor. Cleardisplay showing indoor and outdoor temperature, humidity, time and
date. Thesensor can be placed up to 30 m (line-of-sight) away from thereceiver. Supportsup
to three sensors simultaneously.
Buttons and functions
Operation
Setting the year, time and date
1. Press and hold [ SET.ALM ] for 2 seconds, and then use [ ▲ ] or [ ▼ ] to set theyear.
2. Press [ SET.ALM ] again, themonth digits start to flash. Use[ ▲ ] or [ ▼ ] to set
themonths.
3. Press [ SET.ALM ] again, thedate digits start to flash. Use[ ▲ ] or [ ▼ ] to set thedate.
4. Press [ SET.ALM ] again, “0:00” appears and thehour digits start to flash. Use[ ▲ ] or [ ▼ ]
to set thehours.
5. Press [ SET.ALM ] again, “0:00” appears and theminute digits start to flash. Use[ ▲ ] or [ ▼ ]
to set theminutes.
6. Press [ SET.ALM ] to return to normal mode.
Setting the alarm
1. Press [ SET.ALM ], “AM 7:00 AL” appears on thedisplay.
2. Press and hold [ SET.ALM ] for 2 seconds, thehour digits will start to flash.
Use[ ▲ ] or [ ▼ ] to set thehours.
3. Press [ SET.ALM ] again, theminute digits start to flash. Use[ ▲ ] or [ ▼ ] to set
theminutes.
4. Press [ SET.ALM ] to return to normal mode.
Turning the alarm on/off
1. Press [ SET.ALM ] to display thealarm time. Whenthealarm time is displayed, press [ ▲ ]
once to turn thedaily alarm off.
2. When thealarm function is turned on, the icon shows on thedisplay.
3. When thetime reaches theset alarm time, theclock will beep to wake you. The icon
will flash.
4. To stop thealarm, press [ ▲ ].Thealarm will stop and the icon stops flashing.
Selecting the 12/24 hour display format
Press [ 12/24 ] to select thedisplay format.
Selecting Celsius or Fahrenheit
Press [ °C/°F ] to switch between displaying temperature in degrees Celsius or Fahrenheit.
Reading the highest and lowest recorded temperature
and humidity readings
1. Press [ MAX/MIN ] to view thehighest and lowest indoor/outdoor temperature and
humidity readings respectively.
2. Press and hold [ MAX/MIN ] to clear therecorded value and start recording new data.
Synchronising with multiple outdoor sensors
This unit comes with one sensor. Asecond and athird sensor can be purchased and used
with thethermometer simultaneously.
1. Set thenumber of thechannel on theextra sensor to 2 (under thebattery cover).
2. Press [ CHANNEL ]. “CH2” and “_ _” appear on thelower half of thedisplay.
3. Press and hold [ ALM ON/OFF ] for about 2 seconds.
4. Sensor 2 is now synchronised with thethermometer and thetemperature
of thesecond sensor will appear on thedisplay.
5. Thesame procedure can be repeated for athird sensor.
Care and maintenance
Clean theproduct by wiping it with asoft, dry cloth.
Neveruse solvents or abrasive cleaning agents.
Troubleshooting guide
Problem Solution
Wrongoutdoor temperature
displayed on thereceiver.
Wait 1–2 minutes to make sure that thesensor and
receiver are in sync. Ifnot, resynchronise them.
Thetemperature on thesensor
seems to be too high.
Make sure that thetransmitter is not placed in direct
sunlight or next to aheat source.
Thereceiver cannot receive
signals and display them.
• Synchronise theunits again.
• Thetemperature could be under -50 °C.
• Thesensor’s batteries might need replacing.
• Move thereceiver and thesensor closer to each other.
• Make sure that thesensor is placed away from
electrical interference.
Thefunctions are normal or certain
functions do not work at all.
Theunit needs to be reset. Dothis by removing or
replacing thebatteries in both thereceiver and sensor.
Disposal
Disposal of this product should be in accordance with local regulations.
Ifyou are unsure how to proceed, contact your local authority.
Specifications
Batteries 4×AAA/LR03 batteries (sold separately)
Size 145×72×25 mm
Update interval 1 minute
Humidity 20–95 %
Indoor temperature -10 to +50 °C
Outdoor temperature -50 to +70 °C
1. PM indicator
2. Time
3. Date/Month
4. Indoor humidity
5. Battery status indicator
6. RF sensor
7. Wireless transmission icon
8. [ SET.ALM ] Alarm/settings
9. [ ▼/°C/°F ] Celsius/Fahrenheit selector
10. [ MAX/MIN ] Highest/lowest
11. [ Reset ]
12. [ ▲/12/24 ] Alarm on/off;
Selectingthe12/24 hour display format
13. [ CHANNEL ]
14. Outdoor temperature
15. Outdoor humidity
16. Highest/Lowest icons
17. Indoor temperature
18. Alert ON
19. Battery compartment
20. LED
21. [ Reset ]
22. Base
23. Channel 1, 2 and 3
24. Battery compartment
Getting started
1. Remove thebattery cover on theback of thedisplay unit.
2. Insert 2 x AAA/LR03 batteries. Notethepolarity markings in thebattery compartment.
3. Refit thebattery cover. Thedisplay now shows thedefault time, calendar and present
indoor temperature and begins searching for anoutdoor temperature signal.
4. Insert 2 x AAA/LR03 batteries into theoutdoor sensor. Theoutdoor temperature and
“CH1” will now appear on thelower half of thedisplay. Thewireless thermometer display
unit is now synchronised with theoutdoor sensor on channel 1 and thetemperature from
that sensor is displayed.

Produkt Specifikationer

Mærke: Prologue
Kategori: Ikke kategoriseret
Model: K0391

Har du brug for hjælp?

Hvis du har brug for hjælp til Prologue K0391 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Prologue Manualer

Prologue

Prologue K0391 Manual

29 August 2024
Prologue

Prologue JT2507 Manual

29 August 2024
Prologue

Prologue 1052HIC Manual

29 August 2024
Prologue

Prologue K0389 Manual

28 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Protector

Protector AS-5120 Manual

22 December 2024
Zipper

Zipper ED500FW Manual

22 December 2024
Roland

Roland PDQ-8 Manual

22 December 2024
Panasonic

Panasonic DMW-LMCH62E Manual

21 December 2024
Philips

Philips VisaPure SC6026 Manual

21 December 2024
Philips

Philips DLP2015 Manual

21 December 2024
Philips

Philips SWV3034S Manual

21 December 2024
Philips

Philips CDR24D24H Manual

21 December 2024
Philips

Philips DVDRW1S04 Manual

21 December 2024
Philips

Philips CD74R Manual

21 December 2024