Prologue YPO4238 Manual

Prologue Ure YPO4238

Læs nedenfor 📖 manual på dansk for Prologue YPO4238 (62 sider) i kategorien Ure. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/62
Benämning
Art.no: XX-XXXX Model: XXXXX
Please read the entire instruction manual before use and save for future reference.
We apologise for any text or photo errors and any changes of technical data. If you have any questions con-
cerning technical problems please contact our Customer Service Department.
GREAT BRITAIN: For consumer contact, please visit www.clasohlson.co.uk and click on customer service.
Internet: www.clasohlson.co.uk
GREAT BRITAIN • CUSTOMER SERVICE tel: 0845 300 9799
e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
20140306
A
BC
D
Hourly chime
Day of week
Seconds
Minutes
Alarm
Hours
Date
Features
Press (B) repeatedly to change functions. Thesequence is: MODE
Time, alarm, stopwatch, countdown function (timer), additional time
zone.
A. Time
12/24-hour display
Hours, minutes, seconds, day and date display.
50-year calendar. (2000–2049)
B. Alarm AL
Alarm sounds daily at
theset time.
Use
Setting thetime
C. Stopwatch ST
Accuracy: 1/100 second.
Stopwatch range: 00:00:00–59:59:99
D. Countdown timer TR
Countdown range: 59:59:00–00:00:00
E. Dual time zones T2
Dual time zone display.
2. Press start/stop (D) to reset theseconds display.
3. Press (B) to switch MODE
to thenext setting.
5. Repeat steps 3 and 4 for theremaining settings. Thesettings
sequence is as follows: Seconds – hours – minutes – year –
month – date.
6. Push (A) when you have completed inputting all your RESET
settings. Theday is automatically set when theyear, month
and date is set.
Switching between a12 and 24 hour display
When thewatch is in time display mode press
RESET (A) once to switch between 12 and 24
hour display. “PM” is shown for the12 hour display
and “24H” for the24 hour display.
Digital Watch
Art.no: 36-4046 Model: YP04238/02
Please read theentire instruction manual before using theproduct
and save it for future reference. We reserve theright for any errors
in text or images and any necessary changes made to technical
data. If you have any questions regarding technical problems please
contact Customer Services.
Product description
Digital wristwatch with alarm, date, stopwatch with lap times,
countdown timer, dual time zones and multi-coloured backlight.
Water resistant to 10 ATM.
Buttons
A. Reset button
B. Mode button
C. Backlight button
D. Start/stop button
Display
Alarm & hourly chime
When thealarm is activated thesignal will sound daily at thepreset
time. Turn thealarm off by pressing any button when thealarm sounds.
Otherwise thealarm will sound for about 60 sec. With thehourly
chime activated thewatch will sound every hour on thehour.
Setting thealarm
1. With thewatch in time display mode press
MODE therequired number of times to
reach thealarm settings. Press once. RESET
Thealarm symbol will be displayed and
thehour display will begin flashing.
Displaying thedate
When thewatch is in time display mode press
and hold to display thedate and year.start/stop
2. Press to incrementally increase start/stop
thedigits. Hold thebutton in to increase
thedigits quickly.
3. Press to switch to thenext setting.MODE
1. When thewatch is in time display
mode press and hold (A) until RESET
theseconds display starts to flash.
4. Press start/stop (D)
repeatedly to increase
thedigits incrementally. Hold thebutton in to
increase thedigits quickly.
4. Press to incrementally increase start/stop
thedigits. Hold thebutton in to increase
thedigits quickly.
5. Press to save your settings when RESET
you have completed inputting them. Press
MODE therequired amount of times return
to normal time display.


Produkt Specifikationer

Mærke: Prologue
Kategori: Ure
Model: YPO4238

Har du brug for hjælp?

Hvis du har brug for hjælp til Prologue YPO4238 stil et spørgsmål nedenfor, og andre brugere vil svare dig