Pure Acoustics NRX-465 Manual


Læs nedenfor 📖 manual på dansk for Pure Acoustics NRX-465 (1 sider) i kategorien Højttaler. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Installation instructions
Take the cardboard template that comes with the speakers and
place it where you want the speaker to be mounted.
Draw around the template and cutout the speaker mounting hole.
Run quality speaker wire (12-16 gauge) to that location.
Connect the speaker wire to the speaker terminals and insert the
speaker into the hole.
There are screws around the perimeter of the face of the speaker
Secure the speaker to the wall by tightening these screws until
That’s It ! Enjoy !
Carefully pry off the grill from the speaker.
These screws connect to “ wings” in the rear of the speaker
which will swing out and clamp the speaker to the wall as they
are tightened.
the speaker is securely mounted.


Produkt Specifikationer

Mærke: Pure Acoustics
Kategori: Højttaler
Model: NRX-465

Har du brug for hjælp?

Hvis du har brug for hjælp til Pure Acoustics NRX-465 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Pure Acoustics Manualer

Højttaler Manualer

Nyeste Højttaler Manualer

Tannoy

Tannoy QFLEX 32 Manual

6 November 2024
Tannoy

Tannoy QFLEX 24 Manual

6 November 2024
James

James PD320.4 Manual

5 November 2024
James

James QX330 Manual

5 November 2024
James

James QX3CS Manual

5 November 2024
James

James QX530 Manual

5 November 2024
James

James QX520 Manual

5 November 2024
James

James QX5CS Manual

5 November 2024