Pyle PLMR24DK Manual

Pyle Højttaler PLMR24DK

Læs nedenfor 📖 manual på dansk for Pyle PLMR24DK (1 sider) i kategorien Højttaler. Denne guide var nyttig for 25 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
MOUNTING
Compact 3.5 Wall Mount Home Speakers
3-Way Indoor/Outdoor Speaker System, Camo Style, 200 Watt (Pair)
PLMR24DK
FEATURES:
• Dual Passive Speaker System
• Universal Indoor/Outdoor Mountable
• Hunting Camouage Pattern Design Style
• Marine Grade Construction
Waterproof Rated & Weather-Resistant
• Connect & Stream Audio from External Devices
• 3-Way Full Range Stereo Sound Reproduction
• Bass Reex Vent for Added Bass Response
• Built-in Capacitor Crossover Network
• Lightweight & Compact Size
• Removable Rustproof Mesh Grills
• Quick Connect/Disconnect Speaker Terminals
• Used for Home, Garage, Yard, Deck, Porch, Patio
TECHNICAL SPECS:
• Power: 200 Watt Peak (100 Watt RMS)
• Marine Grade Rating: IP-44
• Subwoofers: 3.5” Aluminum Injection Cones
• Midranges: 1.75” Wide Dispersion Cones
Tweeters: 1.0” Superior Domes
• Construction Material: Engineered ABS
• Frequency Response: 70Hz - 21kHz
• Magnet Structure: 24 oz.
• Impedance: 4 Ohm
• Power Supply: 120V (DC 12V Power Adapter)
• Dimensions (L x W x H): 5.25’ x 3.75’ x 3.75’ -Each
• Sold as: 1
WHAT’S IN THE BOX:
• (2) Wall-Mount Speakers
• Speaker Wire, 11.5’ ft.
• Removable Mounting Brackets
Installation Guide:
MOUNTING THE BRACKET
1. Remove the bracket knobs and the bracket from the speaker
2. Hold the bracket up to the mounting surface. “Plmr” can be
mounted either horizontally or vertically, hold the bracket so
that the speaker wire ts through the large, circular wire hole
in the bracket, align the bracket to be square with the
surrounding (Use A level for accuracy)
3. Mark the locations of the three shaped screw holes, use all of
the holes
4. Drill pilot holes into the mounting surface
5. Gently pull the speaker wire through the wire hole in the
center of the mounting bracket, the bracket so that the holes
all line up
6. Use your hardware to attach the bracket to the mounting
surface
FINAL ADJUSTMENTS
1. After checking that the speaker is in-phase and works
correctly, angle the speaker for the best sound
2. Hand tighten the bracket knobs only, power tools may
over-tighten the knob, and strip the threads of the insert
3. Check that the entire installation is safe and secure


Produkt Specifikationer

Mærke: Pyle
Kategori: Højttaler
Model: PLMR24DK

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PLMR24DK stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Pyle Manualer

Pyle

Pyle PLRGSW64BK Manual

15 Januar 2025
Pyle

Pyle PDIC61RD Manual

30 December 2025
Pyle

Pyle PDIC1681RD Manual

6 December 2024
Pyle

Pyle PHSP6K Manual

6 December 2024
Pyle

Pyle PDIW67 Manual

6 December 2024
Pyle

Pyle PDIC60 Manual

6 December 2024
Pyle

Pyle PLATV65BT Manual

6 December 2024
Pyle

Pyle PDIC81RD Manual

6 December 2024
Pyle

Pyle PDWR40W Manual

6 December 2024

Højttaler Manualer

Nyeste Højttaler Manualer