Qolsys IQ4 NS Manual
Qolsys
Alarmsysteem
IQ4 NS
Læs nedenfor 📖 manual på dansk for Qolsys IQ4 NS (2 sider) i kategorien Alarmsysteem. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
Press
Power Button
twice within 3
seconds
2
UL/cUL Residential Fire and Burglary and UL/ULC Commercial Burglary Alarm Control Unit
Conforms to ANSI/UL Standards UL985, UL1023, & UL2610
Certified to ULC Sub. S545 & ULC Std. S304
Doc#: IQ4NS-QG-NA Rev Date: 2302
Qolsys, Inc. proprietary. Reproduction without written consent is not permitted.
5
WALL MOUNT
CREATE
ACCOUNT
Connect power supply
WARNING! Use 7vDC Power Supply
ONLY
Press and hold the power
button on the right side of
the panel for 3 seconds to
power up
TRY THE
MOBILE TECH
APP
SETUP WIZARD
1
2
3
4
intrusion-support@jci.com
CONTACT TECH SUPPORT
GOT QUESTIONS?
IQ4 NS QUICK GUIDE
1
1. Open the “IQ Installer Interface”, tap on the phone screen to begin. Tap Start Scan
QR Code, then position your phone and scan the QR label on the back of the panel or
the side of the box. Tap .Continue
From your smart device, download “IQ Installer” from the Apple or Google Play stores to connect to IQ4 NS
over Wi-Fi to complete local system setup. To connect, complete the following steps:
2. Press the Power Button twice within 3 seconds.
3. The will turn solid . Tap on the screen. Status LED Blue Next
4. Enter the default Installer (1111) or Dealer (2222) code to connect.
5. When prompted, change the default code to a new installer code.
6. Select , then tap Dashboard Launch Wizard.
1. With a small phillips
screwdriver, undo the
locking screw from the back
of the panel and remove the
SmartMount backplate.
1
2
1. With a small phillips
screwdriver, screw in the
locking screw from the
bottom of the panel to
secure it to the wall.
1
1
1. Mount the backplate to the
wall using flat head screws* and
appropriate wall anchors if
needed, ensuring it is level.
2. If using the model with the
legacy security radio, in the
provided hole on the right hand
side of the backplate drill a 1/4”
hole in the wall and feed the
white RF antenna into the wall.
3. A screw is required in break-
away wall tamper for UL 2610
and EN Grade 2 installations.
1
3
2
Connect the power supply to
the barrel jack on the back of
the panel.
1. Latch the top of the IQ4 NS
onto the SmartMount
backplate.
2. Swing the panel down
towards the backplate and
press firmly against the wall.
3
Produkt Specifikationer
| Mærke: | Qolsys |
| Kategori: | Alarmsysteem |
| Model: | IQ4 NS |
Har du brug for hjælp?
Hvis du har brug for hjælp til Qolsys IQ4 NS stil et spørgsmål nedenfor, og andre brugere vil svare dig
Alarmsysteem Qolsys Manualer
2 September 2024
Alarmsysteem Manualer
- Alarmsysteem Gigaset
- Alarmsysteem Pyle
- Alarmsysteem Nedis
- Alarmsysteem Abus
- Alarmsysteem Burg Wächter
- Alarmsysteem Smartwares
- Alarmsysteem Dometic
- Alarmsysteem Blaupunkt
- Alarmsysteem Honeywell
- Alarmsysteem EZVIZ
- Alarmsysteem König
- Alarmsysteem FireAngel
- Alarmsysteem Redmond
- Alarmsysteem Elro
- Alarmsysteem Yale
- Alarmsysteem Olympia
- Alarmsysteem Olymp
- Alarmsysteem Swann
- Alarmsysteem ORNO
- Alarmsysteem Eufy
- Alarmsysteem Somfy
- Alarmsysteem Hikvision
- Alarmsysteem Monacor
- Alarmsysteem Brennenstuhl
- Alarmsysteem Eminent
- Alarmsysteem Evolveo
- Alarmsysteem Vimar
- Alarmsysteem Dahua Technology
- Alarmsysteem Chacon
- Alarmsysteem FBT
- Alarmsysteem Schwaiger
- Alarmsysteem Bearware
- Alarmsysteem X4-Tech
- Alarmsysteem Chuango
- Alarmsysteem ETiger
- Alarmsysteem ConiuGo
- Alarmsysteem Schabus
- Alarmsysteem Cordes
Nyeste Alarmsysteem Manualer
18 September 2024
17 September 2024
14 September 2024
13 September 2024
8 September 2024
6 September 2024
4 September 2024
2 September 2024
2 September 2024
2 September 2024