QSC SC-433 Manual

QSC Højttaler SC-433

Læs nedenfor 📖 manual på dansk for QSC SC-433 (30 sider) i kategorien Højttaler. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/30
Developed specifically for the unique requirements
of professional motion picture playback, the SC-433
extends QSC’s commitment to the cinema market. As
a member of the DCS Digital Cinema Speaker Series,
the SC-433 is a three-way, selectable bi or tri-amplified
screen channel loudspeaker system comprised of two
main units—the MH-1075 high-frequency system and
the LF-4315 low-frequency system.
The MH-1075 mid-high system features a high
output, horn loaded 10 midrange cone driver and a "
3 (75mm) titanium diaphragm compression driver "
mounted to an adjustable pan and tilt bracket. The
MH-1075 includes a driver protection network and
a passive crossover for bi-amp operation. Power
limiter circuitry protects the high-frequency driver
from overpowering. The MH-1075 provides extended
frequency coverage for the critical midrange band. A
high power 10 cone driver allows operation as low "
as 250 Hz and the advanced phase plug coupling
permits a crossover point of up to 1800 Hz to the
high-frequency horn. This ensures that most of the
dialog range is reproduced by a single element, for
unmatched intelligibility.
The LF-4315 triple 15 (381mm) low-frequency "
enclosure is designed specifically to address the
extended low-frequency response required for cinema
applications. The LF-4315 covers the frequency range
from 35 Hz to 250 Hz. Close Coupled Woofers
(CCW), with their tight spacing between woofers,
improves coupling and keeps coverage angles wide
over a greater frequency range than more widely
spaced designs.
The SC-433 is designed for ease of installation.
The MH-1075 components come pre-assembled to
reduce field assembly time. Three bolts are all that
are required to secure the MH-1075 to the top of the
LF-4315 enclosure.
SC-433
Cinema Loudspeaker System
Specifications SC-433
Nominal Coverage 90° horizontal x +20 to -30° vertical
Frequency Range 32 Hz - 16 kHz (-6 dB)
Crossover Frequency 250 and 1700 Hz, 24 dB per octave
LF-4315 MH-1075
Impedance 5.5 8Ω Ω
Sensitivity 1 watt /1 meter, 99.5 dB Bi-amp Tri-amp
half space 105 dB MF 105 dB HF 107.5 dB
Maximum Input Power1
8 hours of 6 db crest factor 1200 W RMS 250 W RMS2 275 W RMS 80 W RMS
IEC 268 noise spectrum
2 hours of 6 db crest factor 1500 W RMS 350 W RMS
pink noise, 50 Hz - 20 kHz,
AES method
Recommended Amplifier Power 2400 W RMS maximum 800 W RMS maximum
Recommended Processing Subsonic filter below 30 Hz, 4th order LR crossover at 200 and
> 18 dB per octave 1700 Hz via QSC DCM or QSControl.net
Connectors Barrier strip screw terminals Barrier strip screw terminals
accept up to #10 AWG stranded accept up to #10 AWG stranded wire
wire, four terminals; two inputs
and two parallel outputs
Transducers Three 15" (381mm) high efficiency, 10" high efficiency mid range,
extended bass woofer featuring 1.5" (38mm) exit, 3" titanium
4" copper voice coils diaphragm compression driver
Enclosure Quasi B4 alignment, ported Tilt/Pan Bracket
enclosure with fully flared ports, ±10° vertical tilt
symmetrical port design, tuned to ±10° horizontal pan
36 Hz, constructed of MDF and
heavily braced. Features vandal
resistant woofer mounting bolts
Dimensions (HWD) 53" x 30" x 20.3" 39" x 30" x 20"
(1344 mm x 762 mm x 516 mm) (990 mm x 762 mm x 508 mm)
Weight - Net 260 lbs (118 kg) 85 lbs (39 kg)
System Weight 345 lbs (157 kg)
Baffle Cut-Out 93" x 32"
1) Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz - 20 kHz band limiting, 6 dB signal crest factor.
2) Maximum input power tested in accordance with IEC 268-5 recommendations, 200 Hz - 2 kHz band limiting, 6 dB signal crest factor.
passive
mid-high
Features
• Three-way selectable, bi or tri- amplified screen channel system
• MH-1075 provides 90° horizontal by +20° to -30° vertical coverage
• LF-4315 is constructed of MDF and features single woofer chambers
• Low-distortion waveguides provide highly articulate dialogue
• Shallow depth (20") facilitates installation
• THX™ approved for professional cinema applications
THX is a trademark of THX Ltd.

Produkt Specifikationer

Mærke: QSC
Kategori: Højttaler
Model: SC-433

Har du brug for hjælp?

Hvis du har brug for hjælp til QSC SC-433 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højttaler QSC Manualer

QSC

QSC SC-412 Manual

23 Oktober 2024
QSC

QSC SC-443 Manual

23 Oktober 2024
QSC

QSC SC-433 Manual

23 Oktober 2024
QSC

QSC MH-1063 Manual

23 Oktober 2024
QSC

QSC HF-75B Manual

23 Oktober 2024
QSC

QSC SR-110B Manual

23 Oktober 2024
QSC

QSC K12 Manual

13 Oktober 2024
QSC

QSC AcousticDesign AD-S.SAT Manual

7 Oktober 2024
QSC

QSC K8.2 Manual

9 September 2024
QSC

QSC AD-P.SAT Manual

8 September 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Yamazen

Yamazen YTR-D500 Manual

23 Oktober 2024
Yamazen

Yamazen QBU-02 Manual

23 Oktober 2024
Lamax

Lamax Waver1 Manual

22 Oktober 2024
Lamax

Lamax StarCube1 Manual

22 Oktober 2024
Lamax

Lamax PartyKing1 Play Manual

22 Oktober 2024
Lamax

Lamax CyberWave1 Manual

22 Oktober 2024
Lamax

Lamax PartyKing1 Plus Manual

22 Oktober 2024
Majority

Majority P100 Manual

22 Oktober 2024
Majority

Majority P500 Manual

22 Oktober 2024
Majority

Majority P200 Manual

22 Oktober 2024