Quickie Attitude Manual

Quickie Cykel E-cykel Attitude

Læs nedenfor 📖 manual på dansk for Quickie Attitude (144 sider) i kategorien Cykel E-cykel. Denne guide var nyttig for 15 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/144
Attitude &
Attitude Hybrid
000690707.02
DIRECTIONS FOR USE
NOTICE D’UTILISATION
GEBRUIKERSHANDLEIDING
ADD ON BIKE
KIT HANDBIKE
AANKOPPELFIETS
IF YOU ARE VISUALLY IMPAIRED, THIS DOCUMENT CAN BE VIEWED IN PDF
FORMAT AT WWW.SUNRISEMEDICAL.CO.UK
SI VOUS ÊTES VISUELLEMENT DÉFICIENT, CE DOCUMENT PEUT ÊTRE
CONSULTÉ EN FORMAT PDF À WWW.SUNRISEMEDICAL.FR
ALS U VISUEEL GEHANDICAPT BENT KAN DIT DOCUMENT OOK WORDEN
GELEZEN IN PDF-FORMAAT OP WWW.SUNRISEMEDICAL.NL
Aankoppelfiets onderdelen
SUNRISE MEDICAL heeft het ISO 9001 certicaat toegekend gekregen, een bewijs van de kwaliteit van onze processen in elk stadium, vanaf
het onderzoek en de ontwikkeling tot de productie. Deze producten voldoen aan de eisen in overeenstemming met de EG-richtlijnen. Getoonde
opties en accessoires zijn tegen betaling verkrijgbaar.
NL
Description du fauteuil
SUNRISE MEDICAL est certié ISO -9001, une norme qui garantit la qualité des produits à toutes les étapes, de la conception à la production,
en passant par la recherche et le développement.
Ce produit est conforme aux directives de la Communauté européenne. Les options ou accessoires illustrés sont disponibles moyennant un
coût supplémentaire.
FR
Add-on Bike Components
We at SUNRISE MEDICAL have been awarded the ISO-9001 certicate, which afrms the quality of our products at every stage, from R&D to
production. This products meet the requirements in accordance with EC guidelines. Options or accessories shown are available at extra cost.
EN
1. Voorwiel
2. Vork
3. Hendel
4. Naafmotor
5. Crank met handvat
6. Versnellingen
7. Accu
8. Rem
9. Parkeerrem
10. Frame
11. Aankoppelsysteem
12.
Ontkoppelingshendel
13. Koppelingspennen
(rolstoel).
96
3
2
1
4
5
6
7
8
9
10
11
12
13
1. Front wheel
2. Fork
3. Handle
4. Hubmotor
5. Crank with handle
6 Gear change
7. Battery
8. Brake
9. Parking brake
10. Frame
11. Docking system
12.Release Lever
13. Docking Pins
(wheelchair).
4
1. Roue avant
2. Fourche
3. Poignée
4. Moyeu de roue
5. Manivelle avec poignée
6 Manette de changement
de vitesse
7. Batterie
8. Frein
9. Frein de stationnement
10. Châssis
11. Système d‘ancrage
12. Levier de déverrouillage
13. Axes d’ancrage (fauteuil
roulant).
50
ENGLISH
4Attitude/Attitude Hybrid Rev.2.0
Definitions of words used in this manual
Word Definition
DANGER!
Advice to the user of potential risk of
serious injury or death if the advice
is not followed
WARNING! Advice to the user of a risk of injury
if the advice is not followed
CAUTION!
Advice to user that potential
damage to equipment may occur if
the advice is not followed
NOTE: General advice or best practice
Reference To Additional
Documentation
NOTE:
• Please keep a note of your local service agent’s
a d d r e s s a n d t e l e p h o n e n u m b e r i n t h e s p a c e p r o v i d e d .
• In the event of a breakdown, contact them and try to
give all relevant details so they can help you quickly.
• The Add-on Bikes shown and described in this user
guide may not correspond in every detail exactly to
your own model. However, all instructions are still
entirely relevant, irrespective of detail differences.
• The manufacturer reserves the right to alter without
notice any weights, measurements or other technical
data shown in this manual. All figures, measurements
and capacities shown in this manual are approximate
and do not constitute specifications.
Dealer signature and stamp
Definitions
Contents
Definitions 4
Foreword 5
Use 5
Area of application 5
1.0 General safety notes and driving limits 6
Safety instructions – prior to each ride. 7
Safety instructions – while driving 7
Safety instructions - after your ride: 7
2.0 Warranty 8
GUARANTEE 8
Liability 8
3.0 Handling 9
Delivery: 9
Unpacking: 9
Manual version: 9
Hybrid version: 9
Start Up: 9
Storage: 9
Transport: 9
Security: 9
4.0 Adjusting the Pedal Position 10
Adjustment: 10
Handles: 10
5.0 Adjusting the Connecting Frame 12
Adjustment: 12
6.0 Docking and Dedocking 13
Docking: Fig.6.1 - Fig.6.5 13
De-Docking: Fig.6.6 - Fig.6.10 14
7.0 Functional Components 15
Connecting frame (Fig.7.1): 15
Brakes: 15
Parking brake (Fig.7.2 ): 15
Main brakes (Fig.7.3): 15
Performance brake lever (Fig.7.4): 15
Coaster brake (Fig.7.5): 17
Coaster brake integrated in the gear hub: 17
Derailleur gears/gear hub (Fig.7.6-Fig.7.7): 17
Trigger switch (Fig.7.6-Fig.7.7): 17
Grip shift switch (Fig.7.8): 17
8.0 Maintenance 18
Checks to be carried out before use: 18
9.0 Service Period 19
Servicing: 19
10.0 Tyre Maintenance 19
Fitting and repairing tyres: 19
Inflation: 19
11.0 Maitenance Brakes 19
Maintaining the Brakes: 19
12.0 Cleaning/Hygene 19
Hygiene when being reused: 19
13.0 Disposal / Recycling of Materials 20
Materials Used: 20
14.0 Nameplate 20
15.0 Torque 21
Torque Settings: 21
16.0 Technical Data 21
ENGLISH
5
Attitude/Attitude Hybrid Rev.2.0
Foreword
Dear Customer,
We are very happy that you have decided in favour of a
high-quality product from SUNRISE MEDICAL.
This owner's manual will provide numerous tips and ideas
so that your new Add-on Bike can become a trustworthy
and reliable partner in your life.
For Sunrise Medical, it is very important that we have a
good relationship with our customers. We like to keep
you up-to-date about new and current developments at
our company. Keeping close to our customers means:
fast service, as little red tape as possible, working closely
with customers. When you need replacement parts or
accessories, or if you just have a question about your
Add-on Bike – we are there for you.
We want you to be satisfied with our products and
service. At Sunrise Medical we are constantly working to
develop our products further. For this reason, changes
can occur in our palette of products with regard to form,
technology and equipment. Consequently, no claims can
be construed from the data or pictures contained in this
user’s manual.
The management system of SUNRISE MEDICAL is
certified to EN ISO 9001, ISO 13485 and ISO 14001.
As the manufacturer, SUNRISEMEDICAL,
declares that the add-on bikes conform to
the 93/42/EEC directive.
Please contact your local, authorised SUNRISE
MEDICAL dealer if you have any questions concerning
the use, maintenance, or safety of your Add-on Bike.
In case there is no authorised dealer in your area, or you
have any questions, contact Sunrise Medical either in
writing or by telephone.
Sunrise Medical
Thorns Road
Brierley Hill
West Midlands
DY5 2LD
England
Phone: 0845 605 66 88
Fax: 0845 605 66 89
www.SunriseMedical.co.uk
Do not use your Add-on Bike until this Owner›s
Manual has been read and understood.
Please follow the instructions contained within the
Owner›s Manual.
Use
The ATTITUDE is a mechanical propelled / powered drive
unit, which is attached to a wheelchair, to support the
mobility and integration of the wheelchair user in daily life.
It is designed for personal use indoors or outdoors.
The maximum weight limit (includes both the user
and any weight of accessories fitted to the Add-on
Bike) is marked on the serial number label. The serial
number label is located on the frame as well as in the
owner’s manual.
Warranty can only be taken on if the product is used
under the specified conditions and for the intended
purposes.
Lifetime
The expected life of the add-on bike is 5 years, provided
that:
- It is used in strict accordance with the intended use.
- All service and maintenance requirements are fulfilled.
DANGER!
• Do not fit any unauthorized electronic equipment.
Area of application
The add-on bike provides the user with the potential to
safely cover long distances in an ergonomically and
ecologically efficient manner, using their own wheelchair.
It expands the activity radius significantly.
In general we recommend the use of a rear wheel
extension or additional weights to improve the traction of
the driving wheel especially when driving uphill. The
attached wheelchair must be equipped in accordance with
road traffic regulations when used on public roads,
pavements and spaces.
The max user weight is 100 kg. The max load for
transported objects (e.g. in bike panniers) is 5kg each.
Please also check the Owner›s Manual of the bike
panniers.
The add-on bike can be operated by people who:
• are physically and mentally capable of safely
operating the device in all operating situations
(steering, braking , pedalling..) and can meet the legal
requirements for use on public roads.
• Have been advised and trained in it´s use by Sunrise
Medical or an authorized Sunrise Medical dealer
Operating Conditions
The ATTITUDE should be able to cope with tarmac
surfaces and firm paths with different topography Avoid
driving on unpaved or loose surfaces (e.g. on loose
gravel, in sand, mud, snow, ice or through deep puddles
of water), as this may expose the user to unforseen risks.
ENGLISH
6Attitude/Attitude Hybrid Rev.2.0
1.0 General safety notes and driving limits
The technology and construction of this add-on bike
have been designed to provide maximum safety.
International safety standards currently in force have
either been fulfilled or exceeded in parts.
Nevertheless, users may put themselves at risk by
improperly using their add-on bikes. For your own safety,
the following rules must be strictly observed.
Unprofessional or erroneous changes or adjustments
increase the risk of accident. As an add-on bike user,
you are also part of the daily traffic on streets and
pavements, just like anyone else. We would like to
remind you that you are therefore also subject to any
and all traffic laws. Be careful during your first ride in this
add-on bike. Get to know your add-on bike.
WARNING!
• NEVER exceed the maximum load of 100 kg for
driver excluding any items carried on the add-on bike.
• If the max user weight of the attached wheelchair is
less than 100 kg, this lower limit will be valid for the
complete system.
• Exceeding the maximum load can lead to damage to
the add-on bike, loss of control, or serious injury to
the user and other people.
• Exercise caution when using the add-on bike. For
example, avoid negotiating obstacles such as, steps,
curbs, path edges or dropping down gaps without
slowing down or braking first.
• Your add-on bike has not been designed for
transportation in a vehicle. DO NOT sit on the add-on
bike during any transportation in a vehicle; always use
a properly secured vehicle seat!!
• This add-on bike should be used exclusively to
convey one person at a time. Any other use does not
comply with the intended purpose.
• Use of the add-on bike is only recommended for
those who have the right physical and psychological
constitution to be able to cope with public traffic.
• Please note that you are subject to any and all traffic
laws when riding in public traffic.
• As a beginner, you should ride particularly carefully at
first.
• Familiarise yourself with the braking distances from
various speeds.
• Familiarise yourself with the general traffic laws!
• In order to achieve a stable ride when travelling
straight ahead, wherever possible, you should avoid
hasty steering movements when travelling at speed or
going round corners.
• A three-wheeled device is always less stable than a
four-wheeled device.
• When you are riding, braking or manoeuvring, always
hold the handles firmly with both hands. Failure to do
so could increase the risk of an accident through
steering error.
• The add-on bike is a mechanical propelled / powered
drive unit. The speed must be adjusted to suit the
technical capabilities of the bike, terrain and operator.
The max speed is 25 km/h. Never exceed this max
speed.
• At night and dawn/dusk, always use the lights.
• When you are travelling long distances, we
recommend that you take a spare battery with you.
• Only ride on asphalt paths, or firm, smooth surfaces.
• Use caution when riding over curbs, steps, potholes,
etc. as there is an increased risk of tipping over.
• Adjust your method of driving to your capabilities.
• Ride slowly and carefully, particularly when riding
round corners.
• Do not put your hands in the chain area.
• Do not touch the motor, because it can get very hot.
• Your bike should be serviced by your dealer at regular
intervals. (min. every year)
• As with all moving parts, there is a risk that fingers
could become trapped. Please always handle
carefully.
• If the add-on bike is subject to direct sunlight / low
temperatures for long periods, parts of your add-on
bike could become very hot (>41°C) or very cold (<0°).
• Always make sure that the quick tensioner on the
drive wheel is set properly.
• The add-on bike should not be used in storm
conditions, heavy rain/snow or on slippery or damaged
surfaces.
• You should only use product combinations which have
been approved by Sunrise Medical.
DANGER!
CHOKING HAZARD – This mobility aid uses small parts
which under certain circumstances may present a
choking hazard to small children.
The wheelchairs shown and described in this user guide
may not correspond in every detail exactly to your own
model. However, all instructions are completely relevant,
regardless of possible detail differences.
NOTE: The add-on bikes shown and described in this
user guide may not correspond in every detail exactly to
your own model. However, all instructions are completely
relevant, regardless of possible detail differences. The
manufacturer reserves the right to alter without notice
any weights, measurements or other technical data
shown in this manual. All figures, measurements and
capacities shown in this manual are approximate and do
not constitute specifications.
ENGLISH
8Attitude/Attitude Hybrid Rev.2.0
2.0 Warranty
GUARANTEE
THIS GUARANTEE DOES NOT AFFECT YOUR LEGAL RIGHTS IN ANY WAY.
Sunrise Medical* provides a guarantee, as set out in the warranty conditions, for add-on bikes to its customers covering
the following
Warranty conditions
1. Should a part or parts of the add-on bike require repair or replacement as a result of a manufacturing and/or material
fault within 24 months or for frame and cross-braces within 5 years after delivery to the customer, then the affected
part or parts will be repaired or replaced free of charge. (Batteries are guaranteed for a period of 12 months subject to
the correct battery care plan being followed)
2. To enforce the warranty, please contact Sunrise Medical Customer Service with the exact details of the nature
of the difficulty. Should you be using the wheelchair outside the area covered by the Sunrise Medical customer
service agent, repairs or replacement will be carried out by another agency as designated by the manufacturer The
wheelchair must be repaired by a Sunrise Medical designated Customer Service agent, (dealer).
3. For parts, which have been repaired or exchanged within the scope of this warranty, we provide a warranty in
accordance with these warranty conditions for the remaining warranty period for the wheelchair in accordance with
point 1).
4. For original spare parts which have been fitted at the customer’s expense, these will have a 12 months guarantee,
(following the fitting), in accordance with these warranty conditions.
5. Consumable parts such as pads, tyres, inner tubes and similar parts are excluded from the warranty, except in the
case that premature wear of the part is the direct result of a manufacturing fault.
6. Claims from this warranty shall not arise, if a repair or replacement of a wheelchair or a part is required for the
following reasons:
a) The product or part has not been maintained or serviced in accordance with the manufacturer’s recommendations as
shown in the User Instructions and/or the Service Instructions.
b) Accessories have been used which are not specified as original accessories.
c) The wheelchair or part having been damaged by neglect, accident or improper use.
d) Changes/modifications have been made to the wheelchair or parts, which deviate from the manufacturer’s
specifications.
e) Repairs have been carried out, before our Customer Service has been informed of the circumstances.
7. This guarantee is subject to the law of the country in which the product was purchased from Sunrise Medical“
* Means the Sunrise Medical facility from which the product was purchased.
Liability
In case that the add-on bike is:
• handled improperly
• not maintained in accordance with the maintenance schedule
• commissioned and used contrary to the instructions in this manual
• repairs or other works are carried out by non-authorised persons
• third-party parts are installed or connected without prior agreement with Sunrise Medical.
Sunrise Medical GmbH is not responsible for the safety of the add-on bike if any of the above applies.
ENGLISH
9
Attitude/Attitude Hybrid Rev.2.0
3.0 Handling
Delivery:
Your new add-on bike is delivered fully assembled in a
cardboard box. In order to avoid any damage
during transportation, loose parts or parts to be fitted, are
packed separately in the cardboard box.
Unpacking:
• Check the shipping cardboard box for external
damage which may have been caused during
transportation.
• Remove all packaging material.
• Take the add-on bike carefully out of the box and
check that it is complete.
• Check all parts for surface damage, scratches, cracks,
dents, distortions and other defects.
• The scope of delivery consist usually of the ATTITUDE
add-on bike:
Manual version:
Connecting frame with complete docking system.
Hybrid version:
Connecting frame with complete docking system, display,
Lithium Ion battery and charger.
NOTE: Please make a note of the Battery Locking Key
identification number. This number can be used to order
on-line spares at:
https://keyservice.axa-stenman.com/
Start Up:
If the Attitude Hybrid has not been use for 48 hours or
more, please turn the battery on.
NOTE: Should you find any damage, or if any parts are
missing please let us know immediately.
CAUTION!
• The add-on bike may only be used with the delivered
docking system and the suitable docking pins for your
wheelchair. The add-on bike must be handed over
ready to use from Sunrise Medical or an authorized
Sunrise Medical dealer.
• Before using for the first time, the battery should be
fully charged.
Storage:
The add-on bike should always be stored in an
environment with low humidity, on an easy to clean
surface at ambient room temperature (+15°C to + 25°C).
CAUTION!
To avoid creating a hazard the Lithium Ion battery, must
be stored according the description given in the section
Part 2 Neodrives Battery.
Transport:
Your add-on bike has not been designed for
transportation in a vehicle.
WARNING!
• DO NOT sit on the add-on bike during transportation
in a vehicle.
• Always use a properly secured vehicle seat.
• The product and all its components must be secured
during transport so that they are not damaged (e.g. by
falling over) and do not become any risk to other
people.
CAUTION!
• When loading make sure that the cables are not
caught up, become kinked or otherwise damaged.
• The add-on bike may not be used with damaged
cables.
Security:
• To protect your Attitude against theft and also against
unauthorized use, please use a suitable lock, such as
those designed for bicycles.
• For extra security on the Attitude Hybrid, please
remove the SMMI and the battery.
Key Number:
ENGLISH
10 Attitude/Attitude Hybrid Rev.2.0
4.0 Adjusting the Pedal Position
Adjustment:
The default position of the crank is based on data which
dipicts the average best fit. If this is not suitable for you,
please contact your authorized Sunrise Medical dealer.
The pedal position can be adjusted to the user, (arm
length and body position), by an authorized dealer in
accordace with available adjustment options,
WARNING!
• The cranks must not touch the knee or thigh while
pedalling, especially through bends.
• Do not allow the elbows to completely extend when
the crank handles are furthest away from the body.
• If you have poor seating stability, or weak trunk
muscels, a suitable restraint must be used. Please
contact your therapist, doctor or authorized dealer.
The pedal position can be adjusted at least 0- 50.0 mm
forward and 0 - 10 mm upward, (Fig.4.2).
Handles:
WARNING!
• The handles must be held firmly with both hands whilst
driving and held so that the cables always are oriented
upwards.
• Cables should never be kinked or trapped, as this
could cause damage and loss of function.
Fig.4.1
Spacer
S1 = 15mm
S2 = 25mm
S3 = 35mm
Docking Top
Position 2 Docking Top
Position 1
Fig.4.2
69 mm
11 mm
X
Y
Fig.4.3
Docking Bottom
Position 1.
Docking Bottom
Position 2.
Fig.4.4
126 mm
Bottom
Docking
Position 1
Fig.4.5
146 mm
Bottom
Docking
Position 2
ENGLISH
11
Attitude/Attitude Hybrid Rev.2.0
Fig.4.6
A
B
X = 670
Y
S = 25 mm
a
L = 39 mm
95°
Docking top Docking bottom (X) mm (Y) mm (S) mm (a) mm (L) mm
position 1 position 1 640 370 25 75 - 95 35
position 1 position 1 650 370 25 75 - 95 38
position 1 position 1 660 370 25 75 - 95 41
position 1 position 1 670 370 35 75 - 95 44
position 1 position 1 680 370 35 75 - 95 47
position 1 position 1 690 370 35 75 - 95 50
position 2 position 2 660 365 15 75 - 95 36
position 2 position 2 670 365 25 75 - 95 39
position 2 position 2 680 365 25 75 - 95 42
position 2 position 2 690 365 25 75 - 95 45
position 2 position 2 700 365 25 75 - 95 48
position 2 position 2 710 365 35 75 - 95 51
Frame angle: 95°
Seat depth: 440 mm
Seat height rear: 450 mm
Seat height front: 500 mm
COG: 80 mm
ENGLISH
13
Attitude/Attitude Hybrid Rev.2.0
6.0 Docking and Dedocking
WARNING!
• Always make sure that the device is switched off
before docking and dedocking.
• Ensure the wheelchair is fully connected with the add-
on bike before use, by using the handgrip A.
• As with all moving parts, there is a risk that fingers and
/ or clothing could become trapped. Please always
handle carefully.
Refere to the docking check list below:
Docking Pins
Fully locked In
√
Docking Levers
Fully Locked In
√
CAUTION!
• Always keep the docking system clean.
• Clean it after every trip paying particular attention to
sand and mud.
Docking: Fig.6.1 - Fig.6.5
• Drive your wheelchair as close as possible to the add-
on bike.
• The 2 docking pins on your wheelchair should stay
directly in front of the lower docking connector.
• The add-on bike should stand on an even surface.
• Lock the brakes of your wheelchair.
• Pull it towards you by using the handgrip, until the 2
docking pins lock into A.
• Now push the add-on bike upwards/forwards until the
stand wheels and the castors leave the ground B.
• Swing the upper docking connector downwards until it
stops, C.
• Lower the add-on bike until the upper docking
connector is in contact with the front frame of your
wheelchair.
• Pull the red locking lever backwards until it locks firmly
and completely, D.
• Ensure the wheelchair is fully connected with the add-
on bike.
Fig.6.5 D
Fig.6.2
Fig.6.3
Fig.6.4
C
Fig.6.1
A
B
ENGLISH
14 Attitude/Attitude Hybrid Rev.2.0
De-Docking: Fig.6.6 - Fig.6.10
WARNING!
The de-docking procedure should take place on an even
surface.
NOTE: De-docking follows the opposite sequence as
described for Docking.
• Lock the wheelchair brakes.
• Open the red locking levers, A.
• Push the add-on bike forward/upwards until the upper
docking connector has no contact with the front frame
of your wheelchair, B.
• Swing the upper docking connector upwards, C.
• Lower the add-on bike until the stand wheels and
castors have contact to the ground.
• Pull the red release lever by the handgrip, D.
• Pull the add-on bike downwards towards yourself until
the docking pins are totally disengaged.
• Hold this position and push the add-on bike forward
so that it is clear of your wheelchair, E.
Fig.6.6
A
Fig.6.8 C
Fig.6.9 D
Fig.6.7 B
Fig.6.10
E
ENGLISH
15
Attitude/Attitude Hybrid Rev.2.0
7.0 Functional Components
Connecting frame (Fig.7.1):
The connecting frame acts as a parking stand, and
fascilitates easy docking/manoeuvring when the add-on
bike is disconnected from the wheelchair.
The height of the stand wheels can be adjusted using the
bolts, (A).
WARNING!
• The stand wheels must always stay min 30.0 mm
above the ground, when the add-on bike is connected
to the wheelchair.
• The stand wheels must be always adjusted so that the
stand of the add-on bike remains stable when the add-
on bike is disconnected from the wheelchair.
Brakes:
The add-on bike has two brakes that work independently
from one another.
Parking brake (Fig.7.2 ):
The parking brake is assembled to the fork and locks in
automatically when activated. Therefore the red lever
must lock in. The add-on bike should not move with
activated parking brake to make sure parking is safe
To release the parking brake just push the red lever.
Main brakes (Fig.7.3):
The brakes allow you to safely and comfortably brake
your add-on bike.
Performance brake lever (Fig.7.4):
The Performance brake lever (optional) gives you the
possibility to adjust the lever-feel and the way that the
main brake is applied.
Turning the red adjusting screw (A) on the brake lever
clockwise results in a harder lever feel and a better,
linear, controllability of the brake-force.
Turning the red adjusting screw (A) on the brake lever
counter-clockwise will result in a softer lever-feel and
more progressive brake-force.
Fig.7.1
A
Fig.7.2
Fig.7.3
Fig.7.4
A
ENGLISH
16 Attitude/Attitude Hybrid Rev.2.0
WARNING!
• If the main brakes should fail, then the parking brakes
may be used once for emergency braking.
• The main brakes must be repaired imediately before
next use.
• Hard and sudden application of the brakes may cause
you to fall forward with your upper body, resulting in
possible injury. Therefore always stabilise yourself by
holding onto the handles firmly with both hands.
• Braking power can be severley decrease by any or all
of the following:
1. Worn tyre tread.
2. Air pressure which is too low.
3. Soiled and wet tyres.
4. Worn brake pads.
• Ensure that the brake pads and brake discs do not
become contaminated with oil and/or grease. If this
happens the brake pads must be replaced. The brake
disc must be professionally degreased with a brake
cleaner.
• The disc brake is not self-adjusting and needs to be
re-adjusted when the brake pads wear.
• Be aware that the condition of the ground surface can
significantly affect braking efficiency.
WARNING!
• The braking effect will be greatly reduced if the
surface is wet, dirty, sandy, stoney, uneven or
otherwise compromised by environmental conditions.
It is best to avoid such conditions, but if this is not
possible adapt your driving style to avoid the risk of
potentialy serious accidents.
• Dirty and wet rims and brake pads also reduce the
braking effect when using rim brakes. For this reason,
you should always adapt your method of riding to the
environmental conditions in order to avoid serious
accidents.
• Always check the efficiency of the brakes before
starting your journey to ensure that they are working
correctly. The brakes should be checked regularly by
your dealer and adjusted if required.
ENGLISH
17
Attitude/Attitude Hybrid Rev.2.0
Coaster brake (Fig.7.5):
The coaster brake option allows you to brake by
pedalling backwards. This option is required particularly
for users with restricted or no finger function.
The braking system can only be uncoupled for
manoeuvring (Fig.7.5) by moving the lever A.
When riding or moving forward, the system will be put
automatically back into an operational position.
WARNING!
• Riding with the back-pedalling brake deactivated is
not permitted and can lead to an increased risk of
accidents.
Coaster brake integrated in the gear hub:
The gear hub Shimano Nexus has an integrated coaster
brake function, which can be activated by pedalling
backwards.
Derailleur gears/gear hub (Fig.7.6-Fig.7.7):
Gear shifting is carried out using a trigger or grip shift
switch, which are attached to the handgrips.
The Derailleur gears/gear hub enables you to easily
keep moving, regardless of other road conditions.
The derailleur gears may only be switched while
pedalling.
Reducing the pedaling force will allow a fast change of
gears.
The gear hub can also be operated when standing still.
Trigger switch (Fig.7.6-Fig.7.7):
The trigger switch on the left handle, activates the 3
gear hub and the trigger switch on the right handle,
activates the 10 derailleur gears.
When operating the big lever the next lower gear will be
activated.
When operating the smaller lever the next higher gear
will be activated.
The chosen gear is indicated at the operating unit.
Grip shift switch (Fig.7.8):
The grip shift switch at the right handle operates the 10
derailleur gears. Turning the gripshift switch to the left
activates the next lower gear. Turning the grip shift
switch to the right activates the next higher gear.
CAUTION!
Please contact your authorized dealer in case the
derailleur gears/ gear hub does not functioning correctly
Fig.7.5
A
Fig.7.6
Fig.7.7
Fig.7.8
ENGLISH
20 Attitude/Attitude Hybrid Rev.2.0
As we are committed to continually improving the
construction of our wheelchairs and add-on bikes,
product specifications may vary slightly from the
examples illustrated. All weight/dimensions and
performance data is approximate and is provided solely
for guidance.
All products from Sunrise Medical comply with the
93/42/EEC directive for medical products.
All add-on bikes must be used in
accordance with the manufacturer’s
guidelines.
Sunrise Medical GmbH & Co. KG
Kahlbachring 2-4
69254 Malsch/Heidelberg
Deutschland
Tel.: +49 (0) 7253/980-0
Fax: +49 (0) 7253/980-222
kundenservice@sunrisemedical.de
www.SunriseMedical.de
13.0 Disposal / Recycling of Materials
NOTE: If the add-on bike has been made available to
you as part of a charity or medical loans scheme, then it
may not belong to you. If it is no longer required, then
follow the instructions to return it as given by the
organisation that made the add-on bike available to you.
Materials Used:
In the following section, there is a description of the
materials used on the add-on bike, in view of the disposal
or recycling of the add-on bike and its packaging.
There may also be special local regulations in force with
regard to disposal or recycling, these must be taken into
account when disposing of your add-on bike. (This can
include the cleaning or decontamination of the add-on
bike prior to disposal).
Aluminum: Fork, wheels, connecting frame, crank,
main brake lever, gearing components.
Steel: Docking pins, pivots knee lever docking
system.
Composite: Handles, plugs , parking brake lever and
tyres.
Packaging: Made of soft polyethylene, card¬board
Battery: Lithium Ion battery (hazardous product)
Please see battery section for more
detailed information.
NOTE: Disposal or recycling should be done through a
licensed agent or authorised place of disposal.
Alternatively your add-on bike may be returned to your
dealer for disposal.
14.0 Nameplate
The nameplate is located on the frame as well as on a
label in the owner’s manual. The nameplate indicates the
exact model designation and other technical
specifications. Please provide the following pieces of
information whenever you have to order replacement
parts or to file a claim:
Product Name/SKU Number.
Maximum safe slope, depends on wheelchair/
add-on bike setting, posture and physical capa-
bilities of the user.
Load Maximum.
CE Mark
User's Guide.
Not Crash tested
Date of manufacture.
Serial No
SAMPLE
Life R
Life R
Attitude
ATD
ATD
XX 100
XXXXXXXX ATDXXXXXX
ADD ON BIKE

Produkt Specifikationer

Mærke: Quickie
Kategori: Cykel E-cykel
Model: Attitude

Har du brug for hjælp?

Hvis du har brug for hjælp til Quickie Attitude stil et spørgsmål nedenfor, og andre brugere vil svare dig


Cykel E-cykel Quickie Manualer

Quickie

Quickie Attitude Manual

15 August 2024
Quickie

Quickie Shark RT Manual

7 August 2024
Quickie

Quickie Shark R Manual

5 August 2024

Cykel E-cykel Manualer

Nyeste Cykel E-cykel Manualer

Pelikaan

Pelikaan Montage instructie voordrager Sturdy Manual

15 Januar 2025
SFM

SFM Saxonette Amsterdam Manual

15 Januar 2025
SFM

SFM Saxonette Everest Manual

14 Januar 2025
Progress Bike

Progress Bike Fiets Manual

14 Januar 2025
Huka

Huka Duet 2012 Manual

14 Januar 2025
Ave

Ave Xtreme XH5fs Manual

13 Januar 2025
Ave

Ave Touring TH5 2014 Manual

13 Januar 2025
Ave

Ave Xtreme XH3fs Manual

13 Januar 2025
Di Blasi

Di Blasi R34 Manual

12 Januar 2025
Sachs

Sachs Alu Touring 2 - 2008 Manual

12 Januar 2025