Quoizel Purcell PCPU8632C Manual

Quoizel Lettelse Purcell PCPU8632C

Læs nedenfor 📖 manual på dansk for Quoizel Purcell PCPU8632C (2 sider) i kategorien Lettelse. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Package Contents
1of2
For Style PCPU8632C
Please go to for product cleaning tips. Go to the selection.
(4) G9 Clear Xenon Bulbs 40W Maximum, bulbs not included.
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact your original place of purchase.
www.quoizel.com Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Fixture Body
x 1
E
STEP 2 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
Figure 2
Green Ground Screw
on the Crossbar
White wire
from outlet box White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Installation Guide #IS-PCPU8632C
2019 QuoizelInc. ReleasedDate:2019-01-22
visit us on-line at www.quoizel.com
Mounting Screw
x 4
B
Glass Shade
x 4
D
(Step 2 Continued)
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 3
STEP 3 -Install the Fixture Body
A. Place the backplate of the Fixture Body (D) onto the Inner
Backplate (A) and secure with Mounting Screws (B). Tighten until
snug with screwdrivers.
Backplate
B
D
A
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Do not touch the bulb with bare hands use a cloth or glove.
Side Rod
x 12
C
FCrystal
x 4 bags
AInner Backplate
x 1
G
G
G
GG
N
N
N
NN
D
D
D
DD
Figure 1
STEP 1 -Install the Inner Backplate to the outlet box
A. Place the supply wires and ground wire through the Inner
Backplate (A). Attach the Inner Backplate (A) to the outlet box with
the head of the green ground screw facing you. Secure it with
outlet box screws (not included). Tighten until snug with
screwdrivers.
Outlet Box Outlet Box Screw
(not included)
Supply Wires
with Ground Wire
A
Green Ground Screw
G
G
G
GG
N
N
N
NN
D
D
D
DD


Produkt Specifikationer

Mærke: Quoizel
Kategori: Lettelse
Model: Purcell PCPU8632C

Har du brug for hjælp?

Hvis du har brug for hjælp til Quoizel Purcell PCPU8632C stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lettelse Quoizel Manualer

Lettelse Manualer

Nyeste Lettelse Manualer