RCA RCRP05BR Manual

RCA Fjernbetjening RCRP05BR

Læs nedenfor 📖 manual på dansk for RCA RCRP05BR (4 sider) i kategorien Fjernbetjening. Denne guide var nyttig for 33 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

Cable Replacement Remote

RCRP05B Universal Remote Control

Owner’s Manual

Manual del Propietario (parte posterior)

Introduction

The RCRP05B Cable Replacement Remote by RCA is our

latest generation universal remote control. Its sophisticated

technology allows you to consolidate up to ﬁve of your

original home entertainment remote controls into one

easy-to-use product. Moreover, its packed with advanced

features such as:

• Dedicatedkeystocontrolpopularfunctionsonyour

DVR/PVR(Digital/PersonalVideoRecorder)

• ProgrammableMASTERPOWERkeyformasteron/off

control of your home entertainment equipment with a

single keypress

• ProgrammableMacroKeystoconsolidatemulti-step

actions into a single keypress

• ChannelLocktolockchannelselectiononlytothecable

box or satellite receiver

• VolumeLocktolockvolumecontrolstoonemodeor

individual modes

• CodeSearchtohelpprogramcontrolofolderor

discontinued components

• Color-codedkeystoquicklylocatepopularfunctionsfor

cable and satellite

• Codelibraryforpopularvideoandaudiodevices

Before using the product, you will need to install batteries

and also perform some programming to operate the

speciﬁc home entertainment devices you wish to control.

Features and Functions

Use the illustration below to locate features on the

RCRP05B Cable Replacement Remote and then study the

key descriptions below to learn how they function.

To ﬁnd out what type of devices can be controlled by each

devicekeyafterprogramming,seethe“DeviceTable”

section.

TV, DVR/AUX, CBL/SAT,

DVD/VCR AUD, and select

a home entertainment

device to control. Also see

the“DeviceTable”section.

Eachdevicekeyhasan

embeddedLED(redlight)

that blinks upon selection

and indicates the remote

controlisworkingand(after

programming)issending

signals.

NOTE: If you have a digital

TV converter, you can

program it to the CBL/SAT or

DVR/AUX keys.

POWER/MASTER POWER

turns on or off a home

entertainment device. For

MASTERPOWERcontrol,see

the “Using the Master Power

Key”section.

SETUP is used in all

programming sequences.

LIVEcommandsyourPVR/

DVRtoreturntowatching

liveTV.

LIST displays a list of

recordedshowsonyourPVR/

DVR.

(replay) commands your

PVR/DVRset-topboxto

instantly replay the last 7

seconds of a program you

are watching.

(skip

forward, reverse, play,

forward, stop, pause,

record) In all modes

exceptCBL/SAT,usethese

keystocontrolaVCR,DVD

player,oraPVR(after

selectingadesireddevice).

TorecordinDVD/VCR

mode, press twice.InCBL/

SATmode,usethesekeys

tocontroltheDVR/PVR

functions of the cable box or

satellite receiver.

MENU displays the active

device’s menu system.

INFO displays the current

channel and program

information.

Programming Device Control

Before you can start using this remote, you must program it

to control your components.

NOTES:

The RCRP05B Cable Replacement Remote is preprogrammed

to operate an RCA TV, a Toshiba DVD player, an RCA VCR,

a Pioneer audio receiver, and a Motorola cable box. If you

own these brands of these devices, test the remote with

them. If they work, you do not have to program the remote

to operate them.

For control of a Combo device (for example, a TV/VCR

combo), skip this section and perform the instructions

in the “Setting Up a Combo Unit” section. Also refer

to the “Device Table” to ﬁnd out which devices can be

programmed onto each device key.

1. Turn on a device and, if applicable, insert video media,

(e.g.,cassetteordisc).

NOTE: Please read steps 2 through 5 completely before

proceeding. Highlight or write down the codes and

device you wish to program before moving on to step 2.

2. Ontheremotecontrol,pressadevicekeyonce(i.e.,DVD/

VCR,DVR/AUX,AUD,TV,orCBL/SAT);itwillblinkonce.

3. PressandholdSETUPuntiltheselectedmodekeyblinks

twice,thenreleaseSETUP.

4. Use the codes in the accompanying code list to locate

the type of device and brand name and then enter

the ﬁrst four-digit code for your device. If performed

correctly, the selected mode key will blink twice.

NOTE: If the selected mode key emits a long blink,

the entry is invalid. Repeat steps 2 through 4 and try

entering the same code again.

5. AimtheremotecontrolatthedeviceandpressPOWER

once. The device should turn off. If it does not, repeat

steps 2 through 4, trying each code for your brand until

you ﬁnd one that works. If it still does not respond,

trysearchingforthecode(seethe“SearchingforYour

Code”section).

NOTE: If the device does not have a POWER key (e.g.,

DVD and VCR), press the (Play) key.

6. Onceyou’vefoundacodethatturnsyourdeviceonand

off,testotherremotecommandsforthatdevice(e.g.,

volume,channel,menu,etc.).

NOTE: By default, the CH+/- keys change channels on

the CBL/SAT device regardless of what mode you’re in.

So, you should only use these keys to test for CBL/SAT

device codes at this point.

7. Repeat steps 1 through 6 for each device you want the

remote control to operate. For future reference, write

down each working device code in the boxes below.

 DVD/VCRCode:

 DVR/AUXCode:

 AUDCode:

 CBL/SATCode:

 TVCode:

Setting Up a Combo Unit

IfyouownacombounitsuchasaTV/VCRCombooraTV/

DVDCombo,youneedtofollowspecialstepstosetitup.

Perform the following instructions to control combo device:

1. ForaTV/VCRCombo,turnonyourTV/VCRComboand

insertavideocassette.(ForaTV/DVDCombo,inserta

DVD).

2. Ontheremotecontrol,pressDVD/VCRonce;itwillblink

once.ThenpressandholdSETUPuntiltheDVD/VCRkey

blinks twice.

3. Use the codes in the accompanying code list to locate the

brand name and enter the ﬁrst four-digit code for your

combodevice(forexample,TV/VCR).Ifyouperformthis

procedurecorrectly,theDVD/VCRkeywillblinktwice.

NOTE: If the DVD/VCR key did not blink twice after

entering the codes last digit, repeat steps 2 and 3 and

try entering the same code again. If you’ve located

a setup code that works for your combo device (for

example, a TV/VCR Combo) and a separate TV code

is also listed, you’ll need to program this code into

the remote control to access volume control (see the

“Programming Device Control” section).

4. Aimtheremotecontrolatyourcombodevice(for

example,TV/VCRCombo)andpressPOWERonce.The

device should turn off. If it does not respond, repeat

steps 2 and 3, trying each code listed for your brand until

you ﬁnd one that works. If it still does not respond, try

searchingforthecode(seethe“SearchingforYourCode”

section).

5. For future reference, write down each working device

code in the boxes below:

TV/VCRorTV/DVDCode:

TVCode(ifused):

Searching For Your Code

If your home entertainment device does not respond to the

RCRP05B Cable Replacement Remote after trying all of the

codes listed for your brand, or if your brand is not listed at

all, try searching for your code.

Forexample,tosearchforacodeforyourTV:

1. TurnonyourTV.

2. Ontheremotecontrol,pressTVonce;itwillblinkonce.

ThenpressandholdSETUPuntiltheTVkeyblinkstwice.

3. Enter991.TheTVkeywillblinktwice.

4. AimtheremotecontrolattheTVandpressPOWERonce.

5. Press and release the CH+ key continuously, then stop

whentheTVturnsoff.

NOTE: In the search mode, the remote control will send

IR codes from its library to the selected device, starting

with the most popular code ﬁrst.

6. PressPOWER.TheTVshouldturnon,thenpressSETUP

oncetolockinthecode.TheLEDwillblinktwiceto

indicate that the code is saved.

NOTE: If the TV does not turn on during step 6, then

slowly press and release CH- to go back through the

codes, then press SETUP when the TV turns on.

7. TestotherremotecommandsfortheTV(e.g.,volume,

menu,etc.).Ifthecommandsyouwanttousewithyour

TVwork,you’venishedprogrammingforyourTV.If

they don’t, repeat steps 1-4 above. In step 5, don’t stop

whenyourTVturnsoffthersttime—keeppressing

CH+ until it turns off again.

NOTE: By default, the CH+/- keys change channels on

the CBL/SAT device regardless of what mode you’re in.

So, you should only use these keys to test for CBL/SAT

device codes at this point.

8. To search for the codes of your other devices, repeat steps

1through7,butsubstitutetheappropriatekey(e.g.,

DVD/VCR,DVR/AUX,AUD,orCBL/SAT)forthedevice

you’re searching for.

Checking the Codes

If you have set up your remote control by searching for your

device code, you may need to ﬁnd out which four-digit code

is operating your equipment.

Forexample,tondoutwhichcodeisoperatingyourTV:

1. Ontheremotecontrol,pressTVonce;itwillblinkonce.

ThenpressandholdSETUPuntiltheTVkeyblinkstwice.

2. Enter990.TheTVkeywillblinktwice.

3. To view the code for the ﬁrst digit, press 1 once. Count

thenumberoftimestheTVkeyblinks(e.g.,3blinks=3)

andwritedownthenumberintheleft-mostTVCodebox

inthe“ProgrammingDeviceControl”section.

6. Repeatsteps2through5foranothermodeand/orkey

orpressandholdSETUPuntiltheactivemodekeyLED

blinks twice to exit programming.

Deleting a Single Learning Key

This process returns the key to its original programming

forthemodeyouselect.Youcanalsodeletelearned

programming by teaching a different function to the key

(seethe“ProgrammingaLearnedKey”section)

NOTE: If more than 15 seconds pass between key

presses, the remote exits programming.

1. PressandholdSETUPuntilthelast-selectedmodekey

blinkstwice,thenpress976.

2. Pressamodekeyonce(i.e.,DVD/VCR,DVR/AUX,AUD,

TV,orCBL/SAT).TheLEDontheselectedmodekeywill

blink once.

3. Press the key containing the learned function to be

deleted twice. The active mode key will blink twice.

4. Repeat steps 2 through 3 for another key or press and

holdSETUPtoexitprogramming.

Deleting All Learned Keys in a Speciﬁc Mode

NOTE: If more than 15 seconds pass between key

presses, the remote exits programming.

1. PressandholdSETUPuntilthelast-selectedmodekey

blinkstwice,thenpress976.

2. Pressamodekeytwice(i.e.,DVD/VCR,DVR/AUX,AUD,

TV,orCBL/SAT)toclearallthelearnedkeysforthat

mode.ThemodekeyLEDblinkstwice.

3. Repeatstep2foranothermodeorpressandholdSETUP

to exit programming.

NOTE: If a code digit is 0, the selected mode key will

not blink.

4. Repeat step 3 three more times for the remaining digits.

Use 2 for the second digit, 3 for the third digit, and 4 for

thefourthdigit.FinishwritingdownthecodeintheTV

Code boxes.

5. To check for other device codes, repeat steps 1 through 4,

butsubstitutetheappropriatekey(e.g.,DVD/VCR,DVR/

AUX,AUD,orCBL/SAT)forthedeviceyouarechecking.

Writedownthecodesintheappropriateboxesinthe

“ProgrammingDeviceControl”section.

Using Learning

The RCRP05B Cable Replacement Remote includes a

Learningfeaturesoyoucanaddfunctionsthatareunique

toyourhomeentertainmentdevices(e.g.,VCRtrackingup

ordown).

Learning Precautions

• Youroriginalremotecontrolsmustbeinworkingorder

for learning to work properly.

• Learnedkeysaremode-specic,soeachonecanstorea

unique function for each mode.

• Donotusethefollowingkeysforlearning:devicekeys,

SETUP, (Record),Macrokeys.

• Learningcapacityisuptoatotalof50keys,depending

on the code being learned.

• Certaindevicefunctionsarenotlearnableincluding

multi-frequency types, some high frequency ones, and

other unusual formats.

• Foroptimumlearning,avoidhighlevelsofambientlight

such as natural sunlight or energy-efﬁcient ﬂuorescent

lights.

NOTE: Please have your original remote controls handy

before programming learning.

Programming a Learned Key

NOTE: If more than 15 seconds pass between key

presses, the remote exits programming.

1. PressandholdSETUPuntilthelast-selectedmodekey

blinkstwice,thenpress975.

NOTE: If the LED displays one long ﬂash instead,

either your batteries are low, or the RCRP05B Cable

Replacement Remote has a memory fault.

2. Pressamodekeyonce(i.e.,DVD/VCR,DVR/AUX,AUD,

TV,orCBL/SAT)toassignamodeforlearning.

3. Press the desired key on the RCRP05B once to store the

feature to be learned.

4. PlacetheRCRP05BRemoteControlhead-to-head(about

2”apart)fromyouroriginalremotecontrol.Alsolocate

thekey(onyouroriginalremotecontrol)thatyouwant

the RCRP05B Cable Replacement Remote to learn.

Troubleshooting

Device key does not blink when you press a key.

Replacethebatterieswithtwo(2)newAAbatteries(see

the“InstallingBatteries”section).

Device key blinks when you press a key, but home

entertainment device does not respond.

Make sure you are aiming the remote control at your home

entertainment device and that you are within 15 feet of the

device you are trying to control.

The remote control does not control devices or

commands are not performing properly.

Try all listed codes for the device brand being set up. Make

sure all devices can be operated with an infrared remote

control.

TV/VCR Combo does not respond properly.

UsetheVCRcodesforyourbrand.Somecombounitsmay

requirebothaTVcodeandaVCRcodeforfulloperation

(see ).the“SettingUpaComboUnit”section

No volume on a second TV.

Followinstructionsinthe“ChangingVolumeLock”section.

( (Play) and Stop) keys do not work on a

Motorola DCT-2000 cable converter.

Re-programtheCBL/SATkeyforcablecode0476(seethe

“ProgrammingDeviceControl”section).

Tried Search Method and still could not ﬁnd a

working code.

TrytheSearchMethodagainafterclearingoutthedevice

key as follows:

a. PressandholdSETUPuntildevicekeyblinkstwice.

b.Enter992.

c. Press and release the device key to be cleared twice.

Remote control does not turn on Sony or Sharp

TV/VCR Combo.

Forpoweron,theseproductsrequireprogrammingTV

codesontheremotecontrol.ForSony,useTVcode0000

andVCRcode0032.ForSharp,useTVcode0093andVCR

code 0048.

For more information, please visit

www.rcaaccessories.com

Consumer Help Line: 1-800-420-7968

FCC Notice

This equipment has been tested and found to comply with the limits for a

class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate

radio frequency energy and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•Reorientorrelocatethereceivingantenna.

•Increasetheseparationbetweentheequipmentandreceiver.

•Connecttheequipmentintoanoutletonacircuitdifferentfromthatto

which the receiver is connected.

•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

This equipment has been veriﬁed to comply with the limits for a class B

computing device, pursuant to FCC Rules. In order to maintain compliance

with FCC regulations, shielded cables must be used with this equipment.

Operationwithnon-approvedequipmentorunshieldedcablesislikelyto

resultininterferencetoradioandTVreception.Theuseriscautionedthat

changes and modiﬁcations made to the equipment without the approval

of manufacturer could void the user’s authority to operate this equipment.

Re-Assigning Device Keys

The RCRP05B Cable Replacement Remote can be set up to

control a second device of an already-assigned type.

Forexample,tohavetheunitcontrolaTV,aset-topbox,

andtwoaudiodevices(forexample,twoaudioreceivers),

re-assigntheunusedDVD/VCRkeytooperatethesecond

audio device as follows:

NOTE: Performing the steps below will overwrite the

device you’ve programmed for the device key.

1. Ontheremotecontrol,pressDVD/VCRonce;itwillblink

once.ThenpressandholdSETUPuntiltheDVD/VCRkey

blinks twice.

2. Enter992.TheDVD/VCRkeywillblinktwice.

3.PressAUDonce,thenpressDVD/VCRonce.TheDVD/VCR

key will blink twice.

TheDVD/VCRkeyisnowreadytobeprogrammedfor

yoursecondaudiodevice.Seethe“ProgrammingDevice

Control”section.Tore-assignotherdevicekeys,repeat

these and substitute the key sequence using the following

chart:

NOTE: Only one device can be assigned to an unused

device key at a time.

DVD/VCR as 2nd AUD key

DVD/VCR—>SETUP—>9—>9—>2—>AUD—>DVD/VCR

DVD/VCR as 2nd TV key

DVD/VCR—>SETUP—>9—>9—>2—>TV—>DVD/VCR

DVD/VCR as 2nd CBL/SAT key

DVD/VCR—>SETUP—>9–>9–>2–>CBL/SAT—>DVD/VCR

DVD/VCR back to DVD/VCR

DVD/VCR—>SETUP–>9–>9–>2–>DVD/VCR—>DVD/VCR

To re-assign another unused device key, substitute it for the

DVD/VCRkeyaboveandthenperformthesequence.For

example,tore-assignanunusedAUDkeyasasecondDVD

key, perform:

AUD—>SETUP—>9—>9—>2—>DVD—>AUD.

Whenare-assignmentisdone,theselecteddevicekey

(e.g.,AUD)willblinktwicetoconrmyourchoice.Atthat

time,youwillneedtoprogramdevicecontrol(seethe

“ProgrammingDeviceControl”section).

Clearing Custom Programming

The RCRP05B Remote Control contains a Custom

ProgrammingResetprogram.Youcanuseittoremove

all custom programming, except your setup codes and

reassigned device keys.

IMPORTANT: Executing this program will erase all custom

settings for Volume Lock, learned keys, Macro keys, and

Channel Lock. However, your device programming remains.

1. Ontheremotecontrol,pressandholdSETUPuntilthe

last-selected device key blinks twice.

2. Enter980.Thelast-selecteddevicekeyblinkstwice,

pauses, and blinks twice again to conﬁrm that all custom

programming is cleared.

ThisproductiscoveredbyoneormoreofthefollowingU.S.

patents:

5,515,052,6,014,092,5,255,313,5,414,761,5,552,917,

6,097,309,6,522,262,5,568,367,6,330,091,6,701,091

Trademark(s)®Registered

RCRP05BUSIB01

Limited Lifetime Warranty

AudiovoxElectronicsCorporation(the“Company”)warrants

to you the original retail purchaser of this product that should

it, under normal use and conditions, be proven defective in

material or workmanship during its lifetime while you own it,

suchdefect(s)willberepairedorreplaced(attheCompany’s

option)withoutchargeforpartsandrepairlabor.Toobtain

repairorreplacementwithinthetermsofthisWarranty,

the product is to be delivered with proof of warranty

coverage(e.g.datedbillofsale),specicationofdefect(s),

transportation prepaid, to the Company at the address shown

below.Donotreturnthisproducttotheretailer.

ThisWarrantydoesnotcoverproductpurchased,serviced

orusedoutsidetheUnitedStatesorCanada.ThisWarranty

is not transferable and does not extend to costs incurred for

installation, removal or reinstallation of the product. This

WarrantydoesnotapplyifintheCompany’sopinion,the

product has been damaged through alteration, improper

installation, mishandling, misuse, neglect, accident, or the

simultaneoususeofdifferentbatterytypes(e.g.alkaline,

standardorrechargeable).

THEEXTENTOFTHECOMPANY’SLIABILITYUNDERTHIS

WARRANTYISLIMITEDTOTHEREPAIRORREPLACEMENT

PROVIDEDABOVEAND,INNOEVENT,SHALLTHE

COMPANY’SLIABILITYEXCEEDTHEPURCHASEPRICEPAIDBY

PURCHASERFORTHEPRODUCT.

ThisWarrantyisinlieuofallotherexpresswarrantiesor

liabilities.ANYIMPLIEDWARRANTIES,INCLUDINGANY

IMPLIEDWARRANTYOFMERCHANTABILITYORFITNESSFOR

APARTICULARPURPOSESHALLBELIMITEDTODURATION

OFTHISWARRANTY.INNOCASESHALLTHECOMPANYBE

LIABLEFORANYCONSEQUENTIALORINCIDENTALDAMAGES

WHATSOEVER.Nopersonorrepresentativeisauthorizedto

assume for the Company any liability other than expressed

herein in connection with the sale of this product.

Somestates/provincesdonotallowlimitationsonhowlong

an implied warranty lasts or the exclusion or limitation of

incidental or consequential damage so the above limitations

orexclusionsmaynotapplytoyou.ThisWarrantygivesyou

speciﬁc legal rights and you may also have other rights, which

varyfromstate/provincetostate/province.

U.S.A.:AudiovoxElectronicsCorporation,150MarcusBlvd.,

Hauppauge,NewYork11788

CANADA:AudiovoxReturnCenter,c/oGenco,6685Kennedy

Road,Unit3,Door16,Mississauga,OntarioL5T3A5

Installing Batteries

1. Onthebackoftheremotecontrol,pushthetabandlift

off the battery cover.

2. Inserttwo(2)AAbatteries(notincluded).Matchthe+

and - marks with those in the battery case, then insert

them.

3. Align the covers keys with the cases holes and press the

cover back into place. The tab should click when the

cover is locked.

4. Testtheremotecontrolbypressinganymodekey(e.g.,

TV).Ifthebatteriesareinsertedcorrectly,theLED(red

light)willblinkonce.

NOTE: When batteries need replacement, the remote

control will cease to operate. Replace the batteries

and the unit will be restored to its full functionality,

complete with your favorite settings.

Battery Precautions:

•Donotmixoldandnewbatteries.

•Donotmixalkaline,standard(carbon-zinc)or

rechargeable(nickel-cadmium)batteries.

•Alwaysremoveold,weakorworn-outbatteriespromptly

andrecycleordisposeoftheminaccordancewithLocal

andNationalRegulations.

Navigation keys move the cursor in the program guide and

menu screens and navigate within the interactive service.

OKchoosesoptions,PPVevents,andtunestoprograms

from the program guide.

GUIDE displays the program guide.

EXITleaves(orclears)yourdevice’smenuorguide.

DAY +/-movesadayforward(orback)onyourdevice’s

program guide.

PAGE +/- moves up or down one screen at a time through

menu screens and the program guide.

A,B,C,D (red, green, yellow, blue) access additional

features on your cable box, satellite receiver, or Blu-ray disc

player(seeyourdevicemanualfordetails).

VOL +/-raises(orlowers)theaudiovolume.

ON DEMANDaccessesyourprogramprovider’sVideoon

Demandservices.TheONDEMANDkeymaynotworkwith

your program provider. Test the key, and if it doesn’t take

youtoyourprogramprovider’sOnDemandservice,youcan

programtheONDEMANDkeytoaccesstheservice.Seethe

“ProgrammingMacroKeys”sectionlaterinthismanualfor

more information.

CH+/-selectsthenexthigher(orlower)channel.ForDVD

players,usethesekeystoskipforward(orreverse)through

chapters.Forampliers/receivers,usethesekeystoselect

thenexthigher(orlower)presetstation.

NOTE: By default, the CH+/- keys change channels on

the CBL/SAT device regardless of what mode you’re

in. To change the way the CH+/- keys work, see the

“Programming Channel Control Lock” section.

MUTE turns the sound off or on.

FAV cycles through your favorite channels on your cable

box or satellite receiver.

LAST recalls the last channel.

Number keys (1-9, and 0) tunedirectlytochannels(e.g.,

09).Forampliers/receivers,usethekeypadnumbersto

select inputs 1 through 10.

– accessesdigitalsub-channels(forexample,8.1or8.2).

ASPECT changes the aspect ratio of the show you are

watching.(Notavailableonalldevices).

PIPturnsthePicture-In-Picturefeatureonoroff(if

availableonyourdevice).

SWAP switches PIP images and sound between the main

and window pictures.

MOVE moves the PIP window to different positions on your

TVscreen.

PIP CH +/- are used to select the next higher or lower

channel and is displayed on your PIP window.

INPUTinCBL/SATmodeisusedtoviewothervideosources

(AorB).Inothermodes,useINPUTtoswitchbetweenthe

source inputs on the device you are controlling.

MACRO1 and MACRO2 are reserved for use as macro keys

(seethe“ProgrammingMacroKeys”section).

Device Table

NOTE: Please refer to the table below when performing

the instructions in the “Programming Device Control” or

“Setting Up a Combo Unit” sections.

After programming, the RCRP05B Cable Replacement Remote

will be able to control the following types of devices:

TV Television

DVR/AUX DVR,PVR,orauxiliaryTV,DVDplayer,VCR,

ordigitalTVconverter

CBL/SAT Cablebox,satellitereceiver,ordigitalTV

converter

DVD/VCR DVDplayer,VCR,TV/VCRcombo,orTV/DVD

combo

AUD Audio ampliﬁer, tuner, or receiver

Programming a Macro Key

1. Ontheremotecontrol,pressandholdtheSETUPkey

until it blinks twice.

2. Enter995.TheSETUPkeyblinkstwice.

3. Selectamacrokey(forexample,MACRO1)andpressit

once.

4. Press the key sequence you want to program into

themacro.Forexample,toturnonyourTVandraise

itsvolume,presstheTVmodekeyonce,followedby

pressingtheVOL+keyonce.

NOTE: You can program up to 15 key presses into one

macro.

5. PressandholdSETUPuntilitblinkstwice.

6. To add another macro, repeat steps 1 through 5,

substituting the new key sequence to be added in step 4.

NOTE: Programming more than ﬁve macros on the

same macro key overwrites previous settings.

Clearing a Macro Key

1. Ontheremotecontrol,pressandholdtheSETUPkey

until it blinks twice.

2. Enter995.TheSETUPkeyblinkstwice.

3. Press once on the macro key you want to clear.

4. PressandholdSETUPuntiltheactivemodekeyblinks

twice.

This macro key is now clear and ready for reprogramming

(see“ProgrammingaMacroKey”earlierinthissection).If

desired, repeat these to clear another Macro key.

Using The Master Power Key

The RCRP05B Remote Control has a unique feature that

allows you to sequentially turn on or off up to ﬁve of your

home entertainment devices with a single key press.

NOTE: MASTER POWER (POWER) only works in the CBL/SAT

mode. If it is not programmed, only the cable box or satellite

receiver will turn on or off. In any other mode, pressing

MASTER POWER (POWER) once will turn the selected device

on or off.

Programming the Master Power Key

1. Ontheremotecontrol,pressandholdSETUPuntilthe

last-selected device key blinks twice.

2. Enter995.Thelast-selecteddevicekeyblinkstwice.

3. PressPOWERonce.

4. For the ﬁrst device you want in the power on sequence,

pressadevicekey(e.g.,CBL/SAT)once.Thenpress

POWERonce.Fortheseconddeviceinthepower

sequence,pressitskeyonce(e.g,TV).Thenpress

POWER.

5. Repeat step 4 up to four more times to add the second,

third, fourth, and ﬁfth device.

6. To save the settings and exit the program:

a.PressCBL/SATonce.

b.PressandholdSETUPuntiltheCBL/SATkeyblinkstwice.

Using the Master Power Key

1. After programming, point the remote control at the

devices.PressCBL/SATonce.

2. PressPOWERoncetosequentiallyturntheprogrammed

home entertainment devices on or off.

Youwillseethedevicesturnonoroffaccordingtothe

programmed sequence.

Clearing the Master Power Key

1. Ontheremotecontrol,pressandholdSETUPuntilthe

last-selected device key blinks twice.

2. Enter995.Thelast-selecteddevicekeyblinkstwice.

3. PressandreleasePOWER.

4. PressandholdSETUPuntiltheCBL/SATkeyblinkstwice.

DVR/AUX, TV, and CBL/SAT). This can be an advantage if, for

example, you always listen to home entertainment devices

through your receiver’s speakers.

Unlocking Volume Control for a Single

Device (Individual Volume Unlock)

1. AssumingGlobalVolumeLockisactive,selectamodeon

theremotecontrolthatyouwanttounlock(e.g.,CBL/

SAT)andpressitonce.Next,pressandholdSETUPuntil

the device key blinks twice.

2. Enter993.Thelast-selecteddevicekeywillblinktwice.

3. PressVOL-once.Thelast-selecteddevicekeywillblink

four times.

4. Repeat steps 1 through 3 for each device you want

volume to be unlocked.

Now,afteryouselectadevicethathasvolumeunlocked

(e.g.,CBL/SAT),pressingVOL+,VOL-,orMUTE,willcontrol

only that device’s volume.

Unlocking All Volume Control (Global

Volume Unlock)

NOTE: Performing these instructions will set independent

volume control for all programmed devices.

1. Ontheremotecontrol,pressandholdSETUPuntilthe

last-selected device key blinks twice.

2. Enter993.Thelast-selecteddevicekeywillblinktwice.

3. PressVOL+once.Thelast-selecteddevicekeywillblink

four times.

Locking Volume Control To One Mode

(Global Volume Lock)

NOTE: The audio mode’s volume controls are active

regardless of Volume Lock settings. However, if you lock

the volume controls to the AUD mode, you will control the

audio device’s volume in all other modes (i.e., DVD/VCR,

DVR/AUX, TV, or CBL/SAT). This can be an advantage if, for

example, you always listen to home entertainment devices

through your receiver’s speakers.

1. Ontheremotecontrol,pressandholdSETUPuntilthe

last-selected device key blinks twice.

2. Enter993.Thelast-selecteddevicekeywillblinktwice.

3. Selectamode(e.g.,TVorAUD)whichyouwanttouse

to control the volume. The selected device key will blink

twice.

Now,whenyoupressVOL+,VOL-,orMUTE,thevolume

oftheselecteddevice(e.g.,TV)iscontrolledregardlessof

mode.

Programming Macro Keys

The RCRP05B Cable Replacement Remote includes two

macrokeys(locateddirectlybelowtheSWAPandMOVE

keys).Macrokeysallowyoutosetupkeymacrostoactivate

certain keys in a speciﬁc order. For example, you can set up

akeymacrotochangethechannelsonyourTV,raiseor

lowerthevolume,andstartrecordingonyourVCR,allwith

the touch of one key. If you want to change the macros

stored in a previously-programmed macro key, you’ll need

toclearthekeyrst(see“ClearingaMacroKey”laterin

thissection).

Programming Channel Control Lock

Bydefault,inTVmodetheremotecontrol’schannel-control

capabilities are locked to the cable box or satellite receiver.

Theaffectedkeysare1through0,CH+,CH-,andLAST.

This will guarantee that you do not inadvertently change

achannelonyourTV.However,youcandeactivatethis

featuretoallowfullaccesstothesekeysinTVmode.

Unlocking Channel Control

1. Ontheremotecontrol,pressCBL/SATonce;itwillblink

once.PressandholdSETUPuntiltheCBL/SATkeyblinks

twice.

2. Enter973.TheCBL/SATkeywillblinktwice.

3. PressCH-once.TheCBL/SATkeywillblinkfourtimes.

NowtheremotecontrolwillprovideTVandVCRchannel-

controlcapabilitieswhileintheTVorVCRmode.

Locking Channel Control to CBL/SAT

1. Ontheremotecontrol,pressCBL/SATonce;itwillblink

once.PressandholdSETUPuntiltheCBL/SATkeyblinks

twice.

2. Enter973.TheCBL/SATkeywillblinktwice.

3. PressCH+once.TheCBL/SATkeywillblinktwice.

Now,regardlessofwhatmodeyouselect(exceptAUD),the

channel keys will only change channels on your set-top box.

Changing Volume Lock

VolumeLockallowsyoutocontrolthevolumethroughthe

deviceidentiedashavingyourprimaryspeaker(s),regardless

ofwhichmodeyouareusing.OntheRCRP05BRemote

Control,GlobalVolumeLockissettoTV,soyoucancontrolTV

volumewhileintheDVD/VCR,DVR/AUX,TVorCBL/SATmode.

YoucanperformIndividualVolumeUnlockonaselected

device to set its volume control for independent operation.

NOTE: The audio mode’s (AUD) volume controls are active

regardless of Volume Lock settings. However, if you lock the

volume controls to the AUD mode, you will have control of

the audio device’s volume in all other modes (i.e., DVD/VCR,

5. Ontheoriginalremote,pressandholdthekeytobe

learned.Thedevicekey’sLEDwillblinkrapidly,thenturn

off. Continue holding the key on the original remote

untilthedevicekeyLEDblinkstwice.

NOTE: If the LED displays one long blink, a learning

error has occurred. Try repeating this step again until

a successful capture occurs. If the function is still not

captured, press and hold SETUP to exit programming and

review the “Learning Precautions” earlier in this section. If

needed, also see “Troubleshooting” later in this manual.

After review, start programming again at step 1.

Care and Maintenance

•Keeptheremotedry.Ifitgetswet,wipeitdry

immediately.

•Useandstoretheremoteonlyinnormaltemperature

environments.

•Handletheremotegentlyandcarefully.Don’tdropit.

•Keeptheremoteawayfromdustanddirt.

•Wipetheremotewithadampclothoccasionallyto

keep it looking new.

•Modifyingortamperingwiththeremote’sinternal

components can cause malfunction and invalidate its

warranty.

Produkt Specifikationer

Mærke:	RCA
Kategori:	Fjernbetjening
Model:	RCRP05BR
Vægt:	- g
Produktfarve:	Sort
Indbygget skærm:	Ingen
Batteritype:	AA
Antal understøttede batterier:	2
Grænseflade:	IR trådløs
Fjernbetjening korrekt brug:	Audio,AUX1,DVD/Blu-ray,DVR,TV
Indgangstype:	Tryk på knapper
Maks. rækkevidde:	- m
Antal understøttede enheder:	5
Genopladelig:	Ingen