Rega Planar 78 Manual

Rega Pladespiller Planar 78

Læs nedenfor 📖 manual på dansk for Rega Planar 78 (2 sider) i kategorien Pladespiller. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Introduction
The Planar 78 has been designed and engineered to achieve
outstanding performance way beyond the expectations of a
product at this price point. Excellent build quality, reliability
and ease of use combine to make a product which, if used
correctly, will offer you a lifetime of musical enjoyment.
Omitting unnecessary gimmicks allows us to concentrate the
manufacturing costs on the high quality parts necessary to
reproduce records accurately. The single speed Planar 78 is
tted with a hand assembled RB220 tonearm and a precision
main bearing. Theminimalist design of the Rega Planar 78 and
the use of extremely high quality components ensure that your
turntable should last for many years. The tips on the reverse of
these instructions will help increase the life of your turntable
and ensure optimum performance.
Cartridge mounting hardware
Ensure the cartridge mounting hardware is tted correctly using
the alignment protractor (supplied) (5). If using the Rega RB78
mono cartridge the nut should be mounted to the top of the
tonearm headshell. As shown in the diagram below. Do not over
tighten.
Seing up your RB220 tonearm
To set up the RB220 tonearm, screw on the balance weight (4)
along its shaft until the stylus is oating 1 mm clear of a record
on the platter. Tracking force can now be applied, half a turn of
the weight (180 degrees) = 1 gram of force. Turn the weight to the
suggested force of your cartridge manufacturers guidelines. Use
the plastic plugs on the weight as a guide. Bias adjustment is
automatic on the RB220 tonearm. No adjustment is necessary.
Connection to the amplier
The tonearm external phono leads must be connected to your
amplier. Connect as follows: Red right channel / Black left
channel. If your amplier does not have an integrated phono
stage you will require an external stage to amplify the signal
(sold separately).
Turntable contents
Cartridge connections Rega RB78 (tracks at 1.75g) (sold
separately)
The Rega RB78 cartridge is wired internally in series and should
be connected in one of the following ways. If your amplier has
a mono switch take either RED and GREEN or White and Blue
and connect as follows:
If your amplier does NOT have a mono switch connect both
arm wires together and connect as follows:
1. On/off switch (located underneath the plinth) 2. Platter
3. Lightweight plinth 4. Balance weight 5. Alignment protractor
1
2
3
4
5
Green
Blue & Green
Nuts
Bolts
Red & White
Red White
Blue
World class hi- made in England.


Produkt Specifikationer

Mærke: Rega
Kategori: Pladespiller
Model: Planar 78

Har du brug for hjælp?

Hvis du har brug for hjælp til Rega Planar 78 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Pladespiller Rega Manualer

Rega

Rega Planar 10 Manual

30 September 2024
Rega

Rega Planar 1 Plus Manual

19 September 2024
Rega

Rega Naia Manual

1 September 2024
Rega

Rega Planar 78 Manual

27 Juli 2024
Rega

Rega Planar 8 Manual

18 Februar 2024
Rega

Rega RP8 Manual

28 Juni 2023
Rega

Rega Planar 2 Manual

10 April 2023
Rega

Rega RP6 Manual

3 April 2023

Pladespiller Manualer

Nyeste Pladespiller Manualer

Audizio

Audizio RP112 Manual

17 December 2024
Pro-Ject

Pro-Ject X2B Manual

11 December 2024
Victrola

Victrola VPT-800 Manual

11 December 2024
Pioneer

Pioneer PN-X05 Manual

7 December 2024
Pro-Ject

Pro-Ject T1 EVO Manual

7 December 2024
Pro-Ject

Pro-Ject T1 EVO BT Manual

7 December 2024