Ridgid R4092 Manual


Læs nedenfor 📖 manual på dansk for Ridgid R4092 (8 sider) i kategorien zaagmachine. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/8
English
WARNING:
To reduce the risk of injury, do not attempt to use
this product until you have read thoroughly and
understand completely this Operator's Manual and
the Operator’s Manual for your tile saw.
UNPACKING
This product has been shipped completely assembled.
n Carefully remove the product from the box. Make sure
that all items listed in the packing list are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
n Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
n Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
n If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Use of this
product with damaged or missing parts could result
in serious personal injury.
PACKING LIST
See Figure 1.
Stand, Height Adjustment Pin (4), and Operator’s Manual
SETTING UP THE STAND
See Figures 2 - 5.
nWith the unit in the upright position, spread the legs of
the stand. Place stand on level ground.
NOTE: When positioning the stand make sure each leg
is spread fully outward to ensure the stand’s stability.
nTo adjust the height of the stand, move each adjustable
foot up or down until the hole in the leg is aligned with
one of the holes in the foot. Secure the feet in place using
height adjustment pins with bales.
NOTE: Make sure the feet are positioned at the same
height to ensure stability.
nLine up channels under tile saw with braces on stand.
Position saw onto stand. Make sure that the tile saw is
flush against the stand and that all the stand legs are
touching the ground.
nMake sure the stand is stable and on level ground before
using the tile saw.
OPERATOR’S MANUAL
TILE SAW STAND
To register your RIDGID product,
please visit: http://register.RIDGID.com SAVE THESE INSTRUCTIONS
990000487
7-9-18 (REV:02)
ONE WORLD TECHNOLOGIES, INC.
P.O. Box 1427, Anderson, SC 29622
1-866-539-1710 / www.ridgid.com
FOR USE ONLY WITH THE RIDGID R4040 TILE SAW


Produkt Specifikationer

Mærke: Ridgid
Kategori: zaagmachine
Model: R4092

Har du brug for hjælp?

Hvis du har brug for hjælp til Ridgid R4092 stil et spørgsmål nedenfor, og andre brugere vil svare dig




zaagmachine Ridgid Manualer

Ridgid

Ridgid PCS-500 Manual

20 August 2024
Ridgid

Ridgid R30022 Manual

15 August 2024
Ridgid

Ridgid R4040S Manual

12 August 2024
Ridgid

Ridgid R31011 Manual

11 August 2024
Ridgid

Ridgid R4092 Manual

6 August 2024

zaagmachine Manualer

Nyeste zaagmachine Manualer

Husqvarna

Husqvarna 355 Manual

16 September 2024
Milwaukee

Milwaukee HD18 JSB-402C Manual

16 September 2024
Black And Decker

Black And Decker RS601 Manual

15 September 2024
Worx

Worx WX523L.9 Manual

15 September 2024
Powerplus

Powerplus POWE30030 Manual

15 September 2024
Powerplus

Powerplus POWX180 Manual

15 September 2024
Dolmar

Dolmar PS35CTLC-40 Manual

15 September 2024
Parkside

Parkside PSTKA 800 A1 Manual

15 September 2024
Hilti

Hilti SR 4-A22 Manual

15 September 2024
Dolmar

Dolmar PS420C-40 Manual

14 September 2024