Rigol DSG821 Manual
Læs nedenfor 📖 manual på dansk for Rigol DSG821 (20 sider) i kategorien Generator. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/20
RIGOL
Programming Guide
DSG800 Series RF Signal Generator
Sept 201. 8
RIGOL (SUZHOU) TECHNOLOGIES INC, .
Chapter 2 Command System RIGOL
DSG800 2-3Programming Guide
:MMEMory Commands
The :MM EMory commands are used to store files to the internal or external memory of the instrument, read
or delete the specified file as well as query the disk information.
Command List:
:MMEMory:CATalog
:MMEMory:CATalog:LENGth
:MMEMory:COPY
:MMEMory:DATA:IQ
:MMEMory:DATA:IQ:LIST
:MMEMory:DELete
:MMEMory:DISK:FORMat
:MMEMory:DISK:INFormation
:MMEMory:FILEtype
:MMEMory:LDISk:SPACe
:MMEMory:LOAD
:MMEMory:MDIRectory
:MMEMory:MOVE
:MMEMory:PNAMe:EDIT
:MMEMory:PNAMe:STATe
:MMEMory:SAVe
:MMEMory:CATalog
Syntax :MMEMory:CATalog? <path>
Description Query all the files and folders under the specified path.
Parameter Name Type Range Default
<path> ASCII string Valid path --
Explanation <path>: the local memory (D disk), external memory (E disk; when a USB
storage device is detected by the USB HOST interface at the rear panel) or the
subdirectory under the D or E disk.
The query returns a list of all the files and folders under the path specified by
<path>.
Return Format NO.1 File Name: Rigol
NO.2 File Name: 4.STA
Example
:MMEM:CAT? D:
RIGOL Chapter 2 Command System
2-4 DSG800 Programming Guide
:MMEMory:CATalog:LENGth
Syntax :MMEMory:CATalog:LENGth? <path>
Description Query the number of files and folders under the specified path.
Parameter
Name
Type
Range
Default
<path>
ASCII string
Valid path
--
Explanation <path> can be the local memory (D disk), external memory (E disk; when a USB
storage device is detected by the USB HOST interface at the rear panel) or the
subdirectory under the D or E disk.
Return Format The query returns an integer. For example, 2.
Example :MMEM:CAT:LENG? D: /*Query and return the number of files and folders in the
D disk*/
:MMEMory:COPY
Syntax
:MMEMory:COPY <file_source>,<file_destination>
Description Copy the file or folder specified by <file_ source> to the destination path specified
by <file_destination>.
Parameter Name Type Range Default
<file_source> ASCII string The name of the file or folder to
be copied
--
<file_destination> Valid ASCII string destination path --
Explanation <file_ Tsource> denotes the file or folder to be copied. he file or folder name
must contain the path. denotes the destination path and <file_destination>
does not include the filename.
If the file or folder specified by <file_source> does not exist, the operation
fails.
If the destination path specified by <file_destination> does not exist, the copy
operation fails.
Example
:MMEM:COPY \ , \ D: 1.STA D:
RIGOL Chapter 2 Command System
2- 32 DSG800 Programming Guide
[:SOURce]:IQ:SAMPle:STEP
Syntax [:SOURce]:IQ:SAMPle:STEP <value>
[:SOURce]:IQ:SAMPle:STEP?
Description Set the sample rate step of the IQ wavetable output.
Query the sample step rate of the IQ wavetable output.
Parameter Name Type Range Default
<value> Real 1Hz to 10MHz 1MHz
Explanation When <value> is set in "Number" form, the default unit is Hz; for example,
3000. In addition, < value> can also be set in "Number + Unit" form; for
example, 3kHz.
The default unit of the return value is Hz.
After the sample rate step of IQ wavetable output rotate theis set, you can
knob to modify the sample rate at the current step. At this point, you can query
or set the sample rate using the [:SOURce]:IQ:SAMPle command.
Return Format The query returns the sample step rate of the IQ wavetable output. For example,
3000.
Example :IQ:SAMP:STEP 3kHz
:IQ:SAMP:STEP?
Related
Command
[:SOURce]:IQ:SAMPle
[:SOURce]:IQ:TRIGger:ARB
Syntax [:SOURce]:IQ:TRIGger:ARB
Description Stop the waveform output manually.
Explanation When the operation mode after the IQ wavetable is triggered is set to "Arm Auto" or
"Arm Retrig", you need to use this command to stop the waveform output manually
and wait for the next trigger.
Related
Command
[:SOURce]:IQ:TRIGger:OPTMode
RIGOL Chapter 2 Command System
2- 38 DSG800 Programming Guide
[:SOURce]:IQ:TRIGger:OPTMode
Syntax [:SOURce]:IQ: RETRig|AMDAuto|AMDRetrig|SINGleTRIGger:OPTMode
[:SOURce]:IQ:TRIGger:OPTMode?
Description Set the operation mode after the IQ modulation baseband signal is triggered.
Query the operation mode after the IQ modulation baseband signal is triggered.
Parameter
Name
Type
Range
Default
RETRig|AMDAuto|
AMDRetrig|SINGle
Discrete
RETRig|AMDAuto|
AMDRetrig|SINGle
RETRig
Explanation RETRig: select the "Retrig" mode. At this point, the instrument outputs the
baseband s ignal continuously and restarts to output the signal each time a
trigger is received.
AMDAuto: select the "Arm Auto" mode. The instrument starts outputting the
waveform is continuously each time a trigger is received until "Arm ARB"
selected and then waits for the next trigger.
AMDRetrig: select the "Arm Retrig" mode. The instrument starts outputting the
waveform s continuously each time a trigger is received; the instrument restart
outputting the signal when another trigger is received until "Arm ARB" is
selected and then waits for the next trigger.
SINGle : select the "Single" mode. The instrument outputs the specified length
(specified in "Duration") of waveform each time a trigger is received and then
stops to wait for the next trigger.
Return Format The query returns the operation mode after the IQ modulation baseband signal is
triggered. For example, RETRIG.
Example :IQ:TRIG:OPTM RETR
:IQ:TRIG:OPTM?
Related
Commands
[:SOURce]:IQ:TRIGger:ARB
[:SOURce]:IQ:TRIGger:DURation
[:SOURce]:IQ:TRIGger:SEGMent:CURRent?
Syntax [:SOURce]:IQ:TRIGger:SEGMent:CURRent?
Description Query the number of the current wavetable segment.
Return Format The query returns the number of the current wavetable segment. For example, 1.
[:SOURce]:IQ:TRIGger:SEGMent:EXECute
Syntax [:SOURce]:IQ:TRIGger:SEGMent:EXECute
Description Execute the trigger of the next segment.
Explanation This command is only valid when a "Segment" file is loaded and the segment trigger
mode is set to "Next Seg" or "Seamless".
Related
Command
[:SOURce]:IQ:TRIGger:SEGMent:MODE
RIGOL Chapter 2 Command System
2- 40 DSG800 Programming Guide
[:SOURce]:IQ :TRIGger:SEGMent:NEXT
Syntax [:SOURce]:IQ:TRIGger:SEGMent:NEXT <value>
[:SOURce]:IQ:TRIGger:SEGMent:NEXT?
Description Set the number of the next segment of the wavetable.
Query the number of the next segment of the wavetable.
Parameter
Name
Type
Range
Default
<value> 0 Integer 0 to 63
Explanation The upper limit of <value> is determined by the total number of wavetable
segments of the "Segment" file currently loaded.
The number of the next segment of the wavetable increases by 1 automatically
each time a next segment trigger is executed by sending the
[:SOURce]:IQ:TRIGger:SEGMent:EXECute command.
The command is valid only when the "Segment" file is loaded.
Return Format The query returns the number of the next segment of the wavetable. For example, 2.
Example :IQ:TRIG:SEGM:NEXT 2
:IQ:TRIG:SEGM:NEXT?
Related
Commands
[:SOURce]:IQ:TRIGger:SEGMent:EXECute
[:SOURce]:IQ:TRIGger:SEGMent:MODE
RIGOL Chapter 2 Command System
2- 50 DSG800 Programming Guide
[:SOURce]:PM:STATe
Syntax [:SOURce]:PM:STATe ON|OFF|1|0
[:SOURce]:PM:STATe?
Description Turn on or off the Ø M switch.
Query the state of the Ø M switch.
Parameter
Name
T ype
Range
Default
ON|OFF|1|0
Bool
ON|OFF|1|0
OFF|0
Explanation ON|1: Ø Ø turn on the M switch and enable the M function.
OFF the |0: turn off Ø ØM switch and disable the M function.
Return Format The query returns 1 or 0.
Example :PM:STAT ON /*Turn on the Ø M switch*/
:PM:STAT? /*The query returns 1*/
[:SOURce]:PM:WAVEform
Syntax [:SOURce]:PM:WAVEform SINE|SQUA
[:SOURce]:PM:WAVEform?
Description Set the modulation waveform of Ø M.
Query the modulation waveform of Ø M.
Parameter
Name
Type
Range
Default
SINE|SQUA
Discrete
SINE|SQUA
SINE
Explanation SINE: set the modulation waveform of ØM to "Sine".
SQUA: set the modulation waveform of ØM to "Square".
This command is invalid when the ØM modulation source is set to "Ext".
Return Format The query returns SINE . or SQUA
Example :P M:WAVE SQUA
:P ? M:WAVE
Related
Command
[:SOURce]:PM:SOURce
Chapter 2 Command System RIGOL
DSG800 63 2-Programming Guide
[:SOURce]:SWEep:LIST:INITialize:FSTep
Syntax
[:SOURce]:SWEep:LIST:INITialize:FSTep
Description Recalculate the data points set in the current step sweep to generate a new sweep
list.
Explanation In the new sweep list, "SN" depends on the "Points" of step sweep.
"Freq" depends on the "Start Freq" and "Stop Freq" of step sweep.
"Level" depends on the "start Lev" and "Stop Lev" of step sweep.
"Time" depends on the "Dwell Time" of step sweep.
Related
Commands
[:SOURce]:SWEep:STEP:DWELl
[:SOURce]:SWEep:STEP:POINts
[:SOURce]:SWEep:STEP:STARt:FREQuency
[:SOURce]:SWEep:STEP:STARt:LEVel
[:SOURce]:SWEep:STEP:STOP:FREQuency
[:SOURce]:SWEep:STEP:STOP:LEVel
[:SOURce]:SWEep:LIST:INITialize:PRESet
Syntax [:SOURce]:SWEep:LIST:INITialize:PRESet
Description Reset the sweep list to the factory setting.
Explanation After resetting the sweep list to the default using this command, the sweep list only
contains one frequency point (3GHz) and level point (-20dBm).
[:SOURce]:SWEep:LIST:LIST
Syntax
[:SOURce]:SWEep:LIST:LIST? <Start>,<Count>
Description Acquire the sweep data within the specified range of the sweep list.
Parameter
Name
Type
Range
Default
<Start> Integer 1 to the total number of rows in the
current list
--
<Count> Integer 1 to the total number of rows in the
current list
--
Explanation <Start>: denote the number of the start row of the sweep data to be acquired.
<Count>: denote the total number of rows of the sweep data to be acquired.
Return Format The query returns the sweep data newly acquired. For example,
S 2 - N. :2994152687 , 50.000000, 0.500000
S 3 - N. :2888000000 , 60.849998, 0.500000
S 4 - N. :2550000000 , 75.750000, 0.500000
Example :SWE:LIST:LIST? 2,3 /*Acquire 3 rows of sweep data starting from the second
row in the sweep list*/
Produkt Specifikationer
| Mærke: | Rigol |
| Kategori: | Generator |
| Model: | DSG821 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Rigol DSG821 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Generator Rigol Manualer
27 August 2024
21 August 2024
20 August 2024
Generator Manualer
- Generator Scheppach
- Generator Bosch
- Generator Honda
- Generator Guede
- Generator DeWalt
- Generator Husqvarna
- Generator Philips
- Generator Braun
- Generator Zipper
- Generator Makita
- Generator GYS
- Generator Güde
- Generator Yamaha
- Generator Moulinex
- Generator Westinghouse
- Generator Hyundai
- Generator Parkside
- Generator Black And Decker
- Generator Dometic
- Generator FERM
- Generator Eurom
- Generator Trotec
- Generator Einhell
- Generator Stanley
- Generator Honeywell
- Generator Champion
- Generator Hitachi
- Generator Rowenta
- Generator Alpha Tools
- Generator Bavaria
- Generator Defort
- Generator Innoliving
- Generator Topcraft
- Generator Powerfix
- Generator Wood's
- Generator Herkules
- Generator Primo
- Generator Craftsman
- Generator Powerplus
- Generator Anker
- Generator Taurus
- Generator CAT
- Generator Voltcraft
- Generator Domo
- Generator Fieldmann
- Generator Harvia
- Generator Cleanmaxx
- Generator ART
- Generator Sun Joe
- Generator JL Audio
- Generator Draper
- Generator EcoFlow
- Generator GW Instek
- Generator Generac
- Generator Cecotec
- Generator Truper
- Generator Endress
- Generator Ferrex
- Generator Zephyr
- Generator Joy-It
- Generator Bluetti
- Generator Toolcraft
- Generator Simpson
- Generator Subaru
- Generator Fuxtec
- Generator AudioControl
- Generator Aim TTi
- Generator Cocraft
- Generator SRS
- Generator Vetus
- Generator Superior
- Generator Lumag
- Generator Telair
- Generator Tektronix
- Generator Powerspot
- Generator Black Decker
- Generator Cummins
- Generator Briggs & Stratton
- Generator Kraftech
- Generator Anova
- Generator Global
- Generator King Craft
- Generator Zgonc
- Generator Duromax
- Generator CrossTools
- Generator Jackery
- Generator Blodgett
- Generator Lifan
- Generator Robin America
- Generator Cleveland
- Generator Swiss Kraft
- Generator Full Boar
- Generator Duro Pro
- Generator Powerkick
- Generator EizenKraft
- Generator Könner & Söhnen
- Generator Load Up
- Generator Sunbird Solar
- Generator Solaaron
- Generator PowerTech
- Generator A-iPower
- Generator Stromkraft
- Generator ITC Power
- Generator MSW
- Generator Ribimex
- Generator Powerhouse
- Generator Arvey
- Generator PRAMAC
- Generator Prowork
- Generator DuroStar
- Generator ThermaSol
Nyeste Generator Manualer
21 Februar 2025
19 Februar 2025
23 Januar 2025
20 Januar 2025
14 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025
11 Januar 2025