Roland CY-16R-T Manual

Roland Ikke kategoriseret CY-16R-T

Læs nedenfor 📖 manual på dansk for Roland CY-16R-T (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/1
Before using this unit, carefully read the leaet “USING THE UNIT SAFELY” and “IMPORTANT NOTES.”After reading, keep the
document(s) where it will be available for immediate reference.
Owner’s Manual
© 2020 Roland Corporation
Check the Included Items
After opening the package, check that all of the included items
are present. If anything is missing, contact your dealer.
CY-16R-T
1CY-16R-T cymbal pad
2Cymbal nut
3Felt washer
4Stopper
5Connection cable (stereo) x 2
6Cable tie
7Owner’s manual (this document)
CY-14C-T
1CY-14C-T cymbal pad
2Cymbal nut
3Felt washer
4Stopper
5Connection cable (stereo)
6Cable tie
7Owner’s manual (this document)
2 3 4 6
Descriptions
CY-16R-T (Diameter: 16 inches)
lBel
wBo
Edge
BOW/EDGE
OUTPUT jack
BELL
OUTPUT jack
Edge sensor
CY-14C-T (Diameter: 14 inches)
Edge sensor
wBo
Edge BOW/EDGE
OUTPUT jack
If you remove the CY-16R-T/CY-14C-T
Do not place or store the unit in a location where an object
might contact the edge sensor, or where pressure might be
applied to the edge sensor.
Such conditions will cause malfunctions.
Mounting on the Stand
1. Use a commercially available drum key to tighten
the stopper bolt.
* This step is not necessary if you’re using a Roland-made stand that is
equipped with a stopper.
The stopper keeps the V-Cymbal from turning, preventing
the tangling of cables on the stand.
Stopper Bolt
Tighten the bolt
with a commercially
available drum key.
Attach the stopper
so that the bolt is on
the right-hand side,
from the performer’s
perspective.
2. Attach the V-Cymbal, while positioning it so the
Roland logo is located on the side opposite the
performer.
Cymbal nut
Felt washer
Position the Roland logo
on the opposite side of
the playing area.
3. Tighten the included felt washer and the cymbal
nut to obtain the desired movement.
* If you are using a Roland-made stand that includes a felt washer and
cymbal nut, use the felt washer and cymbal nut that are included with
the stand, and do not use the felt washer and cymbal nut that are
included with the CY-16R-T/CY-14C-T.
* Double sounding may occur if the cymbal nut is loose.
4. Secure the cables in place with the cable tie, and
leave some slack in the cables to ensure they are
not pulled by the movement of the V-Cymbal pads.
Leave some
slack in the
cable.
1. Be sure to make this
small plastic hook
visible from you.
Wind a cable tie around
a cable.
2.Wind a cable tie around
the pipe and tighten it in
order to not to slip.
Insert
the small
plastic hook to
a hole to secure
the cable to the
cymbal arm.
Secure the cable in place with the
cable tie.
* Take care to ensure that the cables do not touch the V-Cymbal pads
and/ or the stand. A cable touching a V-Cymbal pad or a stand may
cause double sounding or other incorrect operation.
Connecting to a Drum Sound Module
Using the included connection cable, connect the V-Cymbal to
the drum sound module.
* Use the supplied connection cables (stereo) to make the connections.
If mono cables are used, edge shots, bell shots, and choke play cannot
be supported.
Connect the L-shaped plug of the included cable to the
V-Cymbal pad.
BELL
OUTPUT jack
BOW/EDGE
OUTPUT jack
Connecting the CY-16R-T
as ride
BOW/EDGE
OUTPUT jack
RD cable:
TD-11, TD-15, TD-17, TD-25,
TD-27
To EDGE jack:
TD-30
To RIDE jack:
TD-50
RDB cable:
TD-11, TD-15, TD-17, TD-25,
TD-27
To RIDE jack:
TD-30
To BELL jack:
TD-50
CR1 cable:
To CRASH 2 jack:
TD-11, TD-15, TD-17, TD-25,
TD-27
To CRASH 1, 2 jacks:
TD-30, TD-50
Connecting the CY-14C-T
as crash
About three-way triggering (CY-16R-T only)
The CY-16R-T can take advantage of your percussion sound
module’s three-way triggering functionality to allow you to play
bow, bell, and edge separately.
Connect the two outputs BOW/BELL and BOW/EDGE to the drum
sound module at the same time.
For details on the connection method and settings, refer to the
owner’s manual for your drum sound module.
* If you won’t be using the three-way triggering functionality, connect the
BOW/EDGE OUTPUT jack (not both) to your drum sound module.
Recommended Parameter Settings
These are the recommended values for the trigger parameters
when using the CY-16R-T/CY-14C-T with various drum sound
modules.
If the “PAD TYPE” or “TRIG TYPE” of your drum sound module
provides a “CY16RT” or “CY14CT” setting, choose either of those
settings.
If “CY16RT” or “CY14CT” is not one of the available values, refer to
the support information on the Roland website.
http://roland.cm/trigger_prm
You may need to adjust the trigger parameters depending on
how you’ve mounted the CY-16R-T/CY-14C-T and the location at
which you’ve installed it.
For details on editing refer to the owner’s manual of your drum
sound module.
Bow shot
This is the technique of striking the bow.
It corresponds to the sound of the “head-side” of the connected
trigger input.
Nuance changes dependi trike locationng on the s
* Strike location information is
received only by sound modules
(such as the TD-27) that provide
a specic PAD TYPE for the
CY-16R-T and CY-14C-T as a trigger
parameter.
Bell shot (CY-16R-T only)
* Bell shots are possible when the connection is made to BELL output.
This is the technique of striking the bell.
Striking the bell area will produce the bell sound of the
connected trigger input.
Making the Settings Playing Method
The response to various playing methods depends on the drum sound module. For details, refer to the owner’s manual of your drum
sound module.
Roland CY-16R-T: V-Cymbal Ride
Size 16 inches
Triggers 3 (Bow/Bell/Edge)
Connectors BELL OUTPUT jack
BOW/EDGE OUTPUT jack
Dimensions 407 (W) x 407 (D) x 56 (H) mm
16-1/16 (W) x 16-1/16 (D) x 2-1/4 (H) inches
Weight 1.3 kg / 2 lbs 14 oz
Accessories
Owner’s manual
Leaet “USING THE UNIT SAFELY”
Cymbal nut
Felt washer
Stopper
Connection cable (stereo) x 2
Cable tie
Roland CY-14C-T: V-Cymbal Crash
Size 14 inches
Triggers 2 (Bow/Edge)
Connectors BOW/EDGE OUTPUT jack
Dimensions 356 (W) x 356 (D) x 48 (H) mm
14-1/16 (W) x 14-1/16 (D) x 1-15/16 (H) inches
Weight 1.0 kg / 2 lbs 4 oz
Accessories
Owner’s manual
Leaet “USING THE UNIT SAFELY”
Cymbal nut
Felt washer
Stopper
Connection cable (stereo)
Cable tie
Main Specications
* This document explains the specications of the product at the time that the document was issued. For the latest information, refer to the Roland
website.
Edge shot
This playing method involves striking the edge with the shoulder
of the stick.
When played as shown in the gure, the rim sound of the
connected input is triggered.
Edge sensor
Choke Play
Choking (pinching) the cymbal’s edge with the hand immediately
after hitting the cymbal makes the sound stop.
Choke the location of the edge sensor shown in the gure. If you
choke an area where there is no sensor, the sound does not stop.
Edge sensor
Roland logo

Produkt Specifikationer

Mærke: Roland
Kategori: Ikke kategoriseret
Model: CY-16R-T

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland CY-16R-T stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Roland Manualer

Roland

Roland M-1000 Manual

12 Oktober 2024
Roland

Roland Fantom FA-76 Manual

11 Oktober 2024
Roland

Roland KD-200 Manual

7 Oktober 2024
Roland

Roland RD-88 EX Manual

25 September 2024
Roland

Roland RD-2000 EX Manual

25 September 2024
Roland

Roland KT-10 Manual

22 September 2024
Roland

Roland VH-14D Manual

19 September 2024
Roland

Roland CB-R09S Manual

16 September 2024
Roland

Roland UA-100 Manual

12 September 2024
Roland

Roland GP609 Manual

9 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Kramer

Kramer KC-BRAINware-25 Manual

25 November 2024
Kramer

Kramer KC-BRAINware-50 Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024