Roland Fantom X6 Manual


Læs nedenfor 📖 manual på dansk for Roland Fantom X6 (88 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/88
Thank you, and congratulations on your choice of the Roland Fantom-X6/X7/X8.
202
Copyright © 2004 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the
written permission of ROLAND CORPORATION.
201b
Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY
INSTRUCTIONS” (p. 2), “USING THE UNIT SAFELY” (p. 3–4), and “IMPORTANT NOTES
(p. 4–5). These sections provide important information concerning the proper operation
of the unit. Additionally, in order to feel assured that you have gained a good grasp of
every feature provided by your new unit, Handbook and Owner’s manual should be read
in its entirety. The manual should be saved and kept on hand as a convenient reference.
This Owner’s Manual applies to the Fantom-X6, the Fantom-X7 and the Fantom-X8. The
manual uses the term “Fantom-X” to indicate all these three models.
Listening to the Demo Songs
Press [PLAY] to start demo song playback.
To stop the performance, press [STOP].
* The operation described here will play back one demo song.
In addition to this song, the Fantom-X contains other demo songs that let you experience
the amazing sounds of the Fantom-X. To listen to these demo songs, refer to p. 23.
Rewind Stop Play
Owner’s Manual
2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
WARNING - When using electric products, basic precautions should always be followed, including the following:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any of the ventilation openings. Install in
accordance with the manufacturers instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
WARNING:
IMPORTANT:
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by the
letter E or by the safety earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
THIS APPARATUS MUST BE EARTHED
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.
GREEN-AND-YELLOW: EARTH, BLUE: NEUTRAL, BROWN: LIVE
For the U.K.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
3
USING THE UNIT SAFELY
001
Before using this unit, make sure to read the instructions below,
and the Owner’s Manual.
..........................................................................................................
002b
Connect mains plug of this model to a mains socket outlet with a
protective earthing connection.
..........................................................................................................
Do not open or perform any internal modifications on the unit.
(The only exception would be where this manual provides
specific instructions which should be followed in order to put in
place user-installable options; see p. 240, p. 242, p. 244, p. 246.)
..........................................................................................................
003
Do not attempt to repair the unit, or replace parts within it (except
when this manual provides specific instructions directing you to
do so). Refer all servicing to your retailer, the nearest Roland
Service Center, or an authorized Roland distributor, as listed on
the “Information” page.
..........................................................................................................
004
Never use or store the unit in places that are:
Subject to temperature extremes (e.g., direct sunlight in an
enclosed vehicle, near a heating duct, on top of heat-gener-
ating equipment); or are
Damp (e.g., baths, washrooms, on wet floors); or are
Humid; or are
Exposed to rain; or are
Dusty; or are
Subject to high levels of vibration.
..........................................................................................................
005
This unit should be used only with a rack or stand that is recom-
mended by Roland.
..........................................................................................................
006
When using the unit with a rack or stand recommended by
Roland, the rack or stand must be carefully placed so it is level
and sure to remain stable. If not using a rack or stand, you still
need to make sure that any location you choose for placing the
unit provides a level surface that will properly support the unit,
and keep it from wobbling.
..........................................................................................................
008a
The unit should be connected to a power supply only of the type
described in the operating instructions, or as marked on the unit.
..........................................................................................................
008e
Use only the attached power-supply cord. Also, the supplied
power cord must not be used with any other device.
..........................................................................................................
009
Do not excessively twist or bend the power cord, nor place heavy
objects on it. Doing so can damage the cord, producing severed
elements and short circuits. Damaged cords are fire and shock
hazards!
..........................................................................................................
010
This unit, either alone or in combination with an amplifier and
headphones or speakers, may be capable of producing sound
levels that could cause permanent hearing loss. Do not operate for
a long period of time at a high volume level, or at a level that is
uncomfortable. If you experience any hearing loss or ringing in
the ears, you should immediately stop using the unit, and consult
an audiologist.
..........................................................................................................
011
Do not allow any objects (e.g., flammable material, coins, pins); or
liquids of any kind (water, soft drinks, etc.) to penetrate the unit.
..........................................................................................................
012a:
Immediately turn the power off, remove the power cord from the
outlet, and request servicing by your retailer, the nearest Roland
Service Center, or an authorized Roland distributor, as listed on
the “Information” page when:
The power-supply cord, or the plug has been damaged; or
If smoke or unusual odor occurs
Objects have fallen into, or liquid has been spilled onto the
unit; or
The unit has been exposed to rain (or otherwise has become
wet); or
The unit does not appear to operate normally or exhibits a
marked change in performance.
..........................................................................................................
013
In households with small children, an adult should provide
supervision until the child is capable of following all the rules
essential for the safe operation of the unit.
..........................................................................................................
014
Protect the unit from strong impact.
(Do not drop it!)
..........................................................................................................
015
Do not force the unit’s power-supply cord to share an outlet with
an unreasonable number of other devices. Be especially careful
when using extension cords—the total power used by all devices
you have connected to the extension cord’s outlet must never
exceed the power rating (watts/amperes) for the extension cord.
Excessive loads can cause the insulation on the cord to heat up
and eventually melt through.
..........................................................................................................
016
Before using the unit in a foreign country, consult with your
retailer, the nearest Roland Service Center, or an authorized
Roland distributor, as listed on the “Information” page.
..........................................................................................................
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
4
022a
Always turn the unit off and unplug the power cord before
attempting installation of the circuit board (SRX series; p. 240, p.
242, DIMM; p. 244, p. 246).
..........................................................................................................
023
DO NOT play a CD-ROM disc on a conventional audio CD
player. The resulting sound may be of a level that could cause
permanent hearing loss. Damage to speakers or other system
components may result.
..........................................................................................................
026
Do not put anything that contains water (e.g., flower vases) on this
unit. Also, avoid the use of insecticides, perfumes, alcohol, nail polish,
spray cans, etc., near the unit. Swiftly wipe away any liquid that spills
on the unit using a dry, soft cloth.
..........................................................................................................
101a
The unit should be located so that its location or position does not
interfere with its proper ventilation.
..........................................................................................................
101c
This unit for use only with Roland stand KS-12 (Fantom-X6/
Fantom-X7) / KS-17 (Fantom-X8). Use with other stands (or carts)
is capable of resulting in instability causing possible injury.
..........................................................................................................
102b
Always grasp only the plug on the power-supply cord when
plugging into, or unplugging from, an outlet or this unit.
..........................................................................................................
103a:
At regular intervals, you should unplug the power plug and clean
it by using a dry cloth to wipe all dust and other accumulations
away from its prongs. Also, disconnect the power plug from the
power outlet whenever the unit is to remain unused for an
extended period of time. Any accumulation of dust between the
power plug and the power outlet can result in poor insulation and
lead to fire.
104
Try to prevent cords and cables from becoming entangled. Also,
all cords and cables should be placed so they are out of the reach
of children.
..........................................................................................................
106
Never climb on top of, nor place heavy objects on the unit.
..........................................................................................................
107b
Never handle the power cord or its plugs with wet hands when
plugging into, or unplugging from, an outlet or this unit.
..........................................................................................................
108a
Before moving the unit, disconnect the power plug from the
outlet, and pull out all cords from external devices.
..........................................................................................................
109a
Before cleaning the unit, turn off the power and unplug the power
cord from the outlet (p. 22).
..........................................................................................................
110a
Whenever you suspect the possibility of lightning in your area,
pull the plug on the power cord out of the outlet.
..........................................................................................................
115a
Install only the specified circuit board(s) (SRX Series, DIMM).
Remove only the specified screws (p. 240, p. 242, p. 244, p. 246, p.
248).
..........................................................................................................
118
Should you remove the screws that fasten the bottom panel (the
front panel of the Fantom-X8) or the PC card protector, be sure to
place them out of children’s reach, so there is no chance of them
being swallowed accidentally.
..........................................................................................................
291b
In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2–4, please read
and observe the following:
Power Supply
301
Do not connect this unit to same electrical outlet that is being used by an
electrical appliance that is controlled by an inverter (such as a refrigerator,
washing machine, microwave oven, or air conditioner), or that contains a
motor. Depending on the way in which the electrical appliance is used,
power supply noise may cause this unit to malfunction or may produce
audible noise. If it is not practical to use a separate electrical outlet, connect
a power supply noise filter between this unit and the electrical outlet.
307
Before connecting this unit to other devices, turn off the power to all units.
This will help prevent malfunctions and/or damage to speakers or other
devices.
308
Although the LCD and LEDs are switched off when the POWER switch is
switched off, this does not mean that the unit has been completely discon-
nected from the source of power. If you need to turn off the power
completely, first turn off the POWER switch, then unplug the power cord
from the power outlet. For this reason, the outlet into which you choose to
connect the power cord's plug should be one that is within easy reach and
readily accessible.
Placement
351
Using the unit near power amplifiers (or other equipment containing large
power transformers) may induce hum. To alleviate the problem, change
the orientation of this unit; or move it farther away from the source of
interference.
352a
This device may interfere with radio and television reception. Do not use
this device in the vicinity of such receivers.
352b
Noise may be produced if wireless communications devices, such as cell
phones, are operated in the vicinity of this unit. Such noise could occur
when receiving or initiating a call, or while conversing. Should you
experience such problems, you should relocate such wireless devices so
they are at a greater distance from this unit, or switch them off.
354a
Do not expose the unit to direct sunlight, place it near devices that radiate
heat, leave it inside an enclosed vehicle, or otherwise subject it to temper-
ature extremes. Excessive heat can deform or discolor the unit.
355b
When moved from one location to another where the temperature and/or
humidity is very different, water droplets (condensation) may form inside
the unit. Damage or malfunction may result if you attempt to use the unit
in this condition. Therefore, before using the unit, you must allow it to
stand for several hours, until the condensation has completely evaporated.
358
Do not allow objects to remain on top of the keyboard. This can be the
cause of malfunction, such as keys ceasing to produce sound.
IMPORTANT NOTES
6
Contents
USING THE UNIT SAFELY ..............................................................................3
IMPORTANT NOTES........................................................................................4
Main Features ................................................................................................15
Panel Descriptions ........................................................................................16
Front Panel................................................................................................................................................. 16
Rear Panel.................................................................................................................................................. 18
Getting Ready ................................................................................................19
Connecting an Amp and Speaker System............................................................................................. 19
Placing the Fantom-X8 on a Stand (For Fantom-X8 user) ................................................................. 20
Turning On the Power............................................................................................................................. 21
Adjusting the Display Contrast (LCD Contrast).................................................................................. 22
Turning Off the Power............................................................................................................................. 22
Listening to the Demo Songs.......................................................................23
Listening to the demo song loaded when you start up the Fantom-X ............................................. 23
Listening to the other demo songs......................................................................................................... 23
Various Performance Features ....................................................................24
Velocity/Aftertouch ..................................................................................................................... 24
Pitch Bend/Modulation Lever .................................................................................................... 24
Octave Shift (Oct) .......................................................................................................................... 24
Hold Pedal...................................................................................................................................... 24
Control Pedal ................................................................................................................................. 25
Transpose (Trans).......................................................................................................................... 25
Overview of the Fantom-X ............................................................................26
How the Fantom-X Is Organized ........................................................................................................... 26
Basic Structure ............................................................................................................................... 26
Classification of Fantom-X Sound Types................................................................................... 26
About Simultaneous Polyphony................................................................................................. 28
About Memory.......................................................................................................................................... 28
Temporary Memory...................................................................................................................... 29
Rewritable Memory ...................................................................................................................... 29
Non-Rewritable Memory............................................................................................................. 29
About the Onboard Effects ..................................................................................................................... 29
Effect Types.................................................................................................................................... 29
How Effects Units Work in Different Modes............................................................................ 30
About the Sequencer ................................................................................................................................ 30
What Is a Song? ............................................................................................................................. 30
What Is a Track? ............................................................................................................................ 30
Songs and the Sound Generator Mode ...................................................................................... 31
Positions for Storing a Song......................................................................................................... 31
About the Sampling Section.................................................................................................................... 32
Where Samples are Stored........................................................................................................... 32
Basic Operation of the Fantom-X ........................................................................................................... 33
Switching the Sound Generator Mode....................................................................................... 33
About the Function Buttons ........................................................................................................ 34
Moving the Cursor........................................................................................................................ 34
Modifying a Value ........................................................................................................................ 35
Assigning a Name......................................................................................................................... 36
Registering and recalling frequently used screen pages (Bookmark) .............................................. 37
Registering a page......................................................................................................................... 37
Recalling a page............................................................................................................................. 37
Viewing an explanation of each button (Help).................................................................................... 37
Viewing the number of voices used by the sound generator (Voice Monitor) ............................... 37
7
Contents
Playing in Patch Mode ..................................................................................38
About the Patch Play Screen................................................................................................................... 38
Displaying Patch Play Screen...................................................................................................... 38
Selecting a Patch ....................................................................................................................................... 39
Selecting Patches by Category (Patch Finder) .......................................................................... 40
Selecting Patches from the List.................................................................................................... 41
Auditioning Patches (Phrase Preview) ...................................................................................... 42
Creating a list of frequently used Patches and Performances (Live Setting).................................. 42
Recalling sounds ........................................................................................................................... 42
Registering a sound ...................................................................................................................... 43
Removing a registration............................................................................................................... 43
Removing all sound registrations from a bank ........................................................................ 43
Changing the step at which a sound is registered ................................................................... 43
Selecting Favorite Patches (Favorite Patch).......................................................................................... 44
Registering a Favorite Patch........................................................................................................ 44
Registering Favorite Rhythm Sets ..............................................................................................45
Transposing the Keyboard in Octave Units (Octave Shift) ................................................................ 45
Transposing the Keyboard in Semitone Steps (Transpose)................................................................ 46
Selecting the Tones That Will Sound (Tone On/Off).......................................................................... 46
Playing Single Notes (Monophonic)...................................................................................................... 46
Creating Smooth Pitch Changes (Portamento) .................................................................................... 47
Selecting the Parameter Controlled by the Realtime Controllers or D Beam Controller
(Control Setting) ....................................................................................................................................... 47
Specifying the Part that Will be Affected by the Controller ................................................... 47
Assigning a Parameter to a Controller....................................................................................... 48
Playing Percussion Instruments............................................................................................................. 52
Selecting a Rhythm Set................................................................................................................. 52
Playing a Rhythm Set ................................................................................................................... 53
Playing in Piano Mode ..................................................................................54
Selecting Piano Mode............................................................................................................................... 54
Selecting a Patch ....................................................................................................................................... 54
Selecting Patches by Category..................................................................................................... 54
Selecting from the Patch List Screen........................................................................................... 54
Playing acoustic piano sounds ............................................................................................................... 54
Adjusting the Keyboard Touch (Key Touch)............................................................................ 54
Changing the Piano Sound (Open/Close) ................................................................................55
Adjusting the Depth of Resonance (Resonance)....................................................................... 55
Playing electric piano sounds................................................................................................................. 55
Selecting electric piano effects..................................................................................................... 55
Saving a Sound (Patch)............................................................................................................................ 55
Creating a Patch ............................................................................................56
How to Make Patch Settings................................................................................................................... 56
Editing in a Graphic Display (Zoom Edit) ................................................................................ 57
Initializing Patch Settings (Init)................................................................................................... 57
Copying Patch (Tone) Settings (Copy)....................................................................................... 58
Cautions When Selecting a Waveform ...................................................................................... 58
Saving Patches You’ve Created (Write) ................................................................................................ 59
Auditioning the Save-Destination Patch (Compare) ............................................................... 60
Functions of Patch Parameters ............................................................................................................... 60
Settings Common to the Entire Patch (General)....................................................................... 60
Modifying Waveforms (Wave) ................................................................................................... 62
Changing How a Tone Is Sounded (TMT) ................................................................................ 63
Modifying Pitch (Pitch/Pitch Env)............................................................................................. 67
Modifying the Brightness of a Sound with a Filter (TVF/TVF Env)..................................... 69
Adjusting the Volume (TVA/TVA Env) ................................................................................... 71
8
Contents
Output............................................................................................................................................. 73
Modulating Sounds (LFO) ........................................................................................................... 74
Apply Portamento or Legato to the Sound (Solo/Porta)........................................................ 77
Miscellaneous Settings (Misc) ..................................................................................................... 78
Matrix Control Settings (Ctrl1–4)................................................................................................ 80
Setting Effects for a Patch (Effects/MFX/MFX Control/Chorus/Reverb) .......................... 82
Creating a Rhythm Set ..................................................................................83
How to make Rhythm Set settings......................................................................................................... 83
Editing in a Graphic Display (Zoom Edit) ................................................................................ 84
Initializing Rhythm Set Settings (Init)........................................................................................ 84
Copying Rhythm Tone Settings (Copy)..................................................................................... 84
Cautions When Selecting a Waveform ......................................................................................85
Saving Rhythm Sets You’ve Created (Write) ....................................................................................... 86
Auditioning the Save-Destination Rhythm Set (Compare) .................................................... 86
Functions of Rhythm Set Parameters .................................................................................................... 87
Making Settings Common to the Entire Rhythm Set (General) ............................................. 87
Modifying Waveforms (Wave) ...................................................................................................88
Changing How a Rhythm Tone Is Sounded (WMT) ............................................................... 89
Modifying Pitch (Pitch/Pitch Env)............................................................................................. 90
Modifying the Brightness of a Sound with a Filter (TVF/TVF Env)..................................... 92
Adjusting the Volume (TVA/TVA Env) ................................................................................... 94
Output Settings (Output)............................................................................................................. 95
Setting Effects for a Rhythm Set (Effects/MFX/MFX Control/Chorus/Reverb) ............... 96
Playing in Performance Mode ......................................................................97
Displaying Performance Layer Screen .................................................................................................. 97
Displaying Performance Mixer Screen.................................................................................................. 97
Functions in the PERFORMANCE Layer/Mixer Screen.................................................................... 98
Selecting a Performance........................................................................................................................... 99
Selecting Performances from the List......................................................................................... 99
Creating a list of frequently used Patches and Performances (the Live Setting function) ............ 99
Selecting Favorite Performances .......................................................................................................... 100
Registering a Favorite Performance .........................................................................................100
Using the Layer Screen .......................................................................................................................... 100
Selecting a Part ............................................................................................................................ 100
Selecting the Part that You want to Sound (Keyboard Switch)............................................ 101
Selecting the Sound for a Part ................................................................................................... 101
Combining and Playing Sounds Together (Layer) ................................................................ 102
Playing Different Sounds in Different Areas of the Keyboard (Split)................................. 102
Using the Mixer Screen.......................................................................................................................... 103
Selecting Parts for a Layer or Split............................................................................................ 103
Selecting the Sound for a Part ................................................................................................... 103
Editing the Part Settings............................................................................................................. 104
Selecting a Part to Play Individually (Solo)............................................................................. 105
Silencing the Playback of a Specific Part (Mute) .................................................................... 105
Using pads to mute Parts........................................................................................................... 105
Viewing the Part Settings as a List (Performance Part View).......................................................... 106
Performing with the Arpeggio/Rhythm function............................................................................. 106
Performing with the Realtime Controllers and D Beam Controller ............................................... 106
Viewing MIDI messages for each Part (Part Information) ............................................................... 106
Viewing the number of voices used by the sound generator (Voice Monitor) ............................. 106
Adjusting the Master Level................................................................................................................... 106
9
Contents
Creating a Performance ..............................................................................107
Viewing the Part Settings as a List (Performance Part View) .......................................................... 107
Adjusting the Parameters of Each Part .................................................................................... 107
Selecting the Parameter Controlled by the Realtime Controllers or D Beam Controller
(Control Setting) ..................................................................................................................................... 114
Make Settings for the Realtime Controllers and D Beam Controller (Ctrl)........................ 114
Control Switch Settings (Ctrl Switch) ...................................................................................... 118
Changing the Settings of the Patch Assigned to a Part..................................................................... 119
Initializing Performance Settings (Init) ............................................................................................... 119
Saving a Performance You’ve Created (Write) .................................................................................. 120
Modifying the Sound in Real Time .............................................................121
Waving Your Hand Over the D Beam to Modify the Sound (D Beam Controller) ...................... 121
Making Settings for the D Beam Controller............................................................................ 122
Using Knobs or Buttons to Modify the Sound (Realtime Controller) ............................................ 124
Changing Realtime Controller Settings ................................................................................... 125
Using a Pedal to Modify the Sound (Control Pedal)......................................................................... 126
Making Control Pedal Settings ................................................................................................. 126
Playing Arpeggios .......................................................................................128
About Arpeggio...................................................................................................................................... 128
Playing Arpeggios.................................................................................................................................. 128
Turning Arpeggio On and Off .................................................................................................. 128
Determining the Tempo for Arpeggio Performances............................................................ 128
Holding an Arpeggio.................................................................................................................. 128
Playing Arpeggios Along with the Sequencer ................................................................................... 129
Arpeggio Settings ................................................................................................................................... 129
Selecting Styles for Arpeggio Performances (Arpeggio Style)............................................. 129
Changing the Beat and Shuffle (Arp/Rhythm Grid)............................................................. 129
Applying Staccato and Tenuto (Arp/Rhythm Duration) ..................................................... 130
Selecting Ascending/Descending Variations (Different Ways of Playing the Sounds)
(Arp Motif) ................................................................................................................................... 130
Adjusting the Velocity of the Arpeggio (Arp Velocity)......................................................... 130
Selecting the Part that Will Play Arpeggios in Performance Mode (Arp Part).................. 130
Changing the Accent Strength (Arp Accent) .......................................................................... 130
Hanging the Range of the Arpeggio (Oct Range) .................................................................. 131
Using the Realtime Control Knobs to Edit the Arpeggio Settings....................................... 131
Creating an Arpeggio Style (Arpeggio Style Edit) ............................................................................ 131
Step-recording ............................................................................................................................. 131
Using the Dial or [INC][DEC] to Input Values....................................................................... 132
Saving the Styles You Have Created (Write)...................................................................................... 132
Using the Chord Memory Function (Chord Memory) ...............................133
About the Chord Memory Function.................................................................................................... 133
Performing with the Chord Memory Function.................................................................................. 133
Turning Chord Memory Function On and Off....................................................................... 133
Selecting Chord Forms ............................................................................................................... 133
Sounding a chord in the order of its notes (Rolled Chord)................................................... 134
Creating Your Own Chord Forms ....................................................................................................... 134
Saving the Chord Forms You Have Created...................................................................................... 134
10
Contents
Playing Rhythms .........................................................................................135
About Rhythm Patterns......................................................................................................................... 135
Using Rhythm Groups........................................................................................................................... 135
Playing Rhythm ...................................................................................................................................... 135
Turning Rhythm On and Off..................................................................................................... 135
Determining the Tempo for Rhythm Pattern Performances ................................................ 135
Select the Rhythm Group........................................................................................................... 136
Rhythm Pattern Settings........................................................................................................................ 136
Selecting Rhythm Patterns......................................................................................................... 136
Changing the Beat and Shuffle (Grid)...................................................................................... 137
Applying Staccato and Tenuity (Duration)............................................................................. 137
Changing the velocity of Rhythm Pattern (Rhythm Pattern Velocity) ............................... 137
Changing the Accent Strength (Rhythm Accent) ................................................................... 137
Using the Realtime Control Knobs to Control the Rhythm .................................................. 137
Creating an Rhythm Pattern (Rhythm Pattern Edit)......................................................................... 138
Step-recording ............................................................................................................................. 138
Using the Dial or [INC][DEC] to Input Values....................................................................... 138
Saving the Patterns You Have Created (Write) .................................................................................139
Creating Your Own Styles (Rhythm Group Edit).............................................................................. 139
Saving the Rhythm Group You Have Created (Write) ..................................................................... 140
Sampling ......................................................................................................141
Switching external input on/off........................................................................................................... 141
Making Input Source Settings (Input Setting).................................................................................... 141
Input Effect Setup Settings.................................................................................................................... 142
Sampling Procedure............................................................................................................................... 142
Dividing a Sample During Sampling ....................................................................................... 144
Sampling Earlier in Time (Skip Back Sampling)................................................................................ 145
Editing a Sample..........................................................................................146
Selecting a Sample (Sample List).......................................................................................................... 146
Selecting a Sample....................................................................................................................... 146
Loading a Sample........................................................................................................................ 147
Loading all Samples.................................................................................................................... 147
Unloading a Sample.................................................................................................................... 147
Deleting a Sample ....................................................................................................................... 147
Importing an Audio File ............................................................................................................148
Displaying Sample Edit Screen ............................................................................................................148
Magnifying/Shrinking the Waveform Display (Zoom In/Out).......................................... 148
Setting the Start/End Points of the Sample........................................................................................ 149
Using the knobs to edit the points............................................................................................ 149
Making Settings for Sample (Sample Parameters) ............................................................................ 150
Assigning Samples to a Pad (Assign To Pad) .................................................................................... 151
From Patch Mode ........................................................................................................................ 151
From Performance Mode ........................................................................................................... 151
Assigning a Sample as a Patch to a Part (Assign to Keyboard)....................................................... 152
From Patch Mode ........................................................................................................................ 152
From Performance Mode ........................................................................................................... 152
Create a Rhythm Set (Create Rhythm) ................................................................................................ 152
Creating a Multisample (Create Multisample) ..................................................................................153
Unloading a Sample (Unload).............................................................................................................. 155
Removing Unwanted Portions of a Sample (Truncate).................................................................... 155
Boosting or Limiting the High-frequency Range of the Sample (Emphasis) ................................ 155
Maximizing the Volume of a Sample (Normalize)............................................................................ 156
Amp.......................................................................................................................................................... 156
Stretching or Shrinking a Sample (Time Stretch)............................................................................... 156
Dividing a Sample into Notes (Chop) ................................................................................................. 157
Joining Two or More Samples (Combine) .......................................................................................... 158
Saving a Sample...................................................................................................................................... 159
11
Contents
Using the Pads.............................................................................................160
Using the Hold Function to Sustain a Sound ..................................................................................... 160
Using the Roll Function to Play Sounds.............................................................................................. 160
Making Settings for the Pads (Pad Setting) ........................................................................................ 161
Specify the Currently Used Sound Generator ........................................................................ 161
Settings You Can Make for Each Pad....................................................................................... 161
Settings that Apply to All Pads................................................................................................. 161
Writing the Pad Settings ............................................................................................................ 162
Exchanging the Sound of Two Pads (Pad Exchange) ............................................................ 162
Assigning a Pattern to a Pad (RPS Function) ..................................................................................... 163
Using the Pads to Play Rhythms.......................................................................................................... 163
Playing Back a Song ...................................................................................164
Playing a Song Immediately (Quick Play).......................................................................................... 164
Playing Back Songs Consecutively (Chain Play) ............................................................................... 164
Various Playback Methods ................................................................................................................... 165
Fast-Forward and Rewind During Playback .......................................................................... 165
Playing Back Correctly from the Middle of the Song (MIDI Update).................................165
Muting the Playback of a Specific Instrument........................................................................ 165
Changing the Playback Tempo of a Song................................................................................ 166
Playing a Song Back at a Fixed Tempo (Muting the Tempo Track) .................................... 166
Playing Back a S-MRC Format Song ........................................................................................ 166
Playing Back a Song Repeatedly (Loop Play) ......................................................................... 166
Using the D Beam Controller to Start/Stop Song Playback ................................................. 167
Recording Songs.........................................................................................168
Two Recording Methods............................................................................................................168
Before You Record a New Song ........................................................................................................... 168
Select the Sound to be Used for Recording ............................................................................. 168
Erasing the Song/Pattern from Temporary Song (Song Clear) ........................................... 168
Specify the Time Signature ........................................................................................................ 169
Setting the tempo ........................................................................................................................ 169
Recording Your Performance as You Play It (Realtime Recording) ............................................... 170
Basic Operation for Realtime Recording ................................................................................. 170
Recording Tempo Changes in a Song (Tempo Recording)................................................... 171
Loop Recording and Punch-In Recording............................................................................... 171
Correct the Timing of Your Playing as You Record (Recording Quantize) ....................... 172
Selecting the Sequencer Data that will Be Recorded (Recording Select) ............................ 172
Erasing Unwanted Data While You Record (Realtime Erase).............................................. 173
Recording Arpeggios Aligned to the Measures of the Sequencer ....................................... 173
Auditioning Sounds or Phrases While Recording (Rehearsal Function)............................ 173
Inputting Data One Step at a Time (Step Recording)........................................................................ 174
Inputting Notes and Rests ......................................................................................................... 174
Assigning a Pattern to a Phrase Track ..................................................................................... 176
Editing Songs ..............................................................................................177
Loading the Song You Want to Edit.................................................................................................... 177
Viewing the data within a track................................................................................................ 178
Using Different Sound Generators for Each Track ................................................................ 178
Loading Individual Tracks/Patterns of Song Data................................................................ 178
Silencing the Playback of a Track (Mute) ................................................................................ 178
Assigning Markers (Locate Positions) to a Song .................................................................... 179
Specifying the Area of a Song that will Repeat (Loop Points).............................................. 179
Editing Sequencer Data Over the Specified Range (Track Edit) ..................................................... 180
Basic Operation for Track Editing ............................................................................................ 180
Aligning a Song’s Timing (Quantize) ...................................................................................... 181
Erasing Unwanted Performance Data (Erase) ........................................................................ 183
Deleting Unwanted Measures (Delete).................................................................................... 184
Copying Phrases (Copy) ............................................................................................................ 184
13
Contents
Making Reverb Settings (Reverb) ........................................................................................................ 216
Mastering Effect...................................................................................................................................... 217
Connecting to Your Computer via USB (USB Mode) ...............................218
About USB Functions............................................................................................................................. 218
Switching the Storage Mode and the MIDI Mode............................................................................. 218
Transferring Files to or from Your Computer (Storage Mode) ....................................................... 219
Exchanging MIDI Messages with Your Computer (MIDI Mode)................................................... 222
File-Related Functions (File Utility)............................................................223
Basic Procedure....................................................................................................................................... 223
Copying a File (Copy)............................................................................................................................ 224
Deleting a File (Delete) ..........................................................................................................................224
Moving a File (Move)............................................................................................................................. 224
Initializing a Memory Card (Card Format) ........................................................................................ 224
Settings Common to All Modes (System Function) .................................225
How to Make System Function Settings ............................................................................................. 225
Saving the System Settings (System Write)........................................................................................ 225
Functions of System Parameters ..........................................................................................................226
Pedal/D Beam ............................................................................................................................. 226
Keyboard ...................................................................................................................................... 226
Sync/Temp .................................................................................................................................. 227
Metronome................................................................................................................................... 228
Sound............................................................................................................................................ 229
MIDI .............................................................................................................................................. 230
USB................................................................................................................................................ 231
Scale Tune..................................................................................................................................... 232
Preview ......................................................................................................................................... 232
System Ctrl ................................................................................................................................... 233
Background .................................................................................................................................. 233
Screen Saver ................................................................................................................................. 233
Sampling....................................................................................................................................... 233
Start up.......................................................................................................................................... 234
System Information................................................................................................................................ 234
Data Management Functions
Reset to Default Factory Settings (Factory Reset)...................................235
Basic Procedure....................................................................................................................................... 235
Backing Up User Data (User Backup) ................................................................................................. 235
Restoring User Data that You Backed Up (User Restore) ................................................................ 235
Factory Reset ........................................................................................................................................... 235
Using Fantom-X Editor................................................................................236
Installing Fantom-X Editor into Your Computer............................................................................... 236
Making Connections .............................................................................................................................. 236
Using Fantom-X Librarian .................................................................................................................... 236
Fantom-X Editor System Requirements.............................................................................................. 237
System Requirements (Windows) ............................................................................................ 237
System Requirements (Mac OS)................................................................................................ 237
About V-LINK ...............................................................................................238
What is V-LINK? .................................................................................................................................... 238
Connection Examples ............................................................................................................................ 238
Turning the V-LINK ON/OFF ............................................................................................................. 238
V-LINK Settings...................................................................................................................................... 238
V-LINK Parameters .................................................................................................................... 239
Resetting the Image..................................................................................................................... 239
14
Contents
Installing the Wave Expansion Board........................................................240
Cautions When Installing an Wave Expansion Board...................................................................... 240
How to Install a Wave Expansion Board ............................................................................................ 240
Checking the Installed Wave Expansion Boards ............................................................................... 241
Installation de la carte d’expansion Wave ................................................242
Précautions à prendre lors de l’installation d’une carte d’expansion Wave ................................. 242
Installation d’une carte d’expansion Wave ........................................................................................ 242
Vérification des cartes d’extension audio aprés installation............................................................ 243
Expanding the Memory ...............................................................................244
Precautions for Expanding Memory ................................................................................................... 244
How to Expand the Memory ................................................................................................................ 244
Removing the Memory............................................................................................................... 245
Checking that memory is installed correctly...................................................................................... 245
Ajouter de la mémoire.................................................................................246
Précautions à prendre lors de l’ajout de mémoire............................................................................. 246
Installation du module de mémoire .................................................................................................... 246
Retrait du module de mémoire................................................................................................. 247
Vérifier que la mémoire est installée correctement ........................................................................... 247
Using a Memory Card..................................................................................248
Before Using the Memory Card ...........................................................................................................248
Writing data to the card......................................................................................................................... 248
Installing the PC Card Protector .......................................................................................................... 248
Troubleshooting ..........................................................................................249
Problems Concerning the Entire Fantom-X ............................................................................ 249
Issues Related to Sound ............................................................................................................. 249
Issues Related to Effects ............................................................................................................. 251
Issues Related to Saving Data ................................................................................................... 251
Issues Related to Sequencer....................................................................................................... 252
Issues Related to MIDI and External Devices......................................................................... 253
Issues Related to Sampling ........................................................................................................ 254
Issues Related to a Memory Card............................................................................................. 254
Parameter List..............................................................................................255
Patch Parameter...................................................................................................................................... 255
Rhythm Set Parameter........................................................................................................................... 259
Performance Parameter ......................................................................................................................... 262
Rhythm Group Parameter..................................................................................................................... 265
Sample Parameters................................................................................................................................. 265
System Parameters ................................................................................................................................. 266
Effects List ...................................................................................................270
Multi-Effects Parameter......................................................................................................................... 270
Chorus Parameters................................................................................................................................. 293
Reverb Parameters ................................................................................................................................. 294
Input Effect Parameters ......................................................................................................................... 294
Error Messages............................................................................................296
About MIDI....................................................................................................297
About MIDI Connectors............................................................................................................. 297
MIDI Channels and Multi-timbral Sound Generators........................................................... 297
MIDI Implementation ...................................................................................298
Specifications ..............................................................................................333
Index .............................................................................................................335
15
Main Features
Cutting-edge sound engine that
unifies audio and MIDI
The Fantom-X inherits the same sound engine that was acclaimed on
the Fantom-S, unifying synthesizer and sampler into a single sound
generator. Sampled waveforms and waveforms imported from a PC
or other external source can also be used as synthesizer waveforms.
In addition to the internal sounds and sampled waveforms, you can
install up to four SRX-series wave expansion boards for instant
access to an even broader range of sounds.
Top-class 128-voice polyphony
An ample 128 voices of polyphony guarantees stress-free music
production or live performance.
Highest quality 88-note
multisampled piano waveforms
The Fantom-X features an 88-note multisampled piano painstakingly
recorded by professional engineers. Every note has been sampled in
stereo with four velocity-switched layers, meaning that a lavish 704
samples are used to create this piano sound. It boasts not only tonal
quality but also a high level of presence, making it closer than ever to
the “real thing.
The 128 MB of internal waveform memory is double that of the
Fantom-S series. It adds a wide range of sounds created with an
emphasis on quality, including strings, nylon string guitar, drums,
and bass, as well as piano.
* 88-note multisampling is used only for the piano waveform.
Large, color LCD—first ever on a
synthesizer!
A large, color LCD is used for excellent visibility and user-
friendliness.
With a fresh new appearance, it opens a new era in user interfaces.
Full-fledged sampler
In addition to sampling and resampling functionality, waveform
editing is also provided, delivering functionality that rivals
dedicated samplers. There’s also an Auto Sync function that can
automatically match the length of a measure to the current tempo.
32 MB of sampling memory is provided as standard, and you can
install expansion DIMM modules to expand this to as much as 544
MB.
Skip Back Sampling
The Skip Back Sampling function that was so popular on the
Fantom-S series is also featured on the Fantom-X.
This function continually records whatever you play on the Fantom-
X. Then, when you happen to come up with an inspired riff, simply
press a single button to capture it.
Piano mode and Live Setting function
Piano mode lets you use the Fantom-X as a dedicated piano simply
by pressing one button. The Live Setting function provides recall of
live performance setups, guaranteeing smooth transitions between
songs in your set.
A full complement of interfaces
USB connector for connection to your computer
USB-MIDI support allows data to be exchanged with your computer,
and also makes it easy to connect with PC tools.
For connection to audio devices, both analog and digital input and
output are provided as standard. When sampling, you can select
either analog or digital as the source.
There’s also a PC card slot for backing up your data. This allows you
a broad choice of media including SmartMedia and Compact Flash,
and since media capacities up to 1 GB are supported (when using
Compact Flash), you have great flexibility in data transfer.
Built-in 16-track sequencer
A high-resolution 16-track sequencer is built in. With functions like
Loop recording that lets you record each part non-stop, it’s designed
not to interfere with your creative imagination. After you’ve input
your data, you can take advantage of the large LCD to edit track data
graphically.
Dynamic pad bank
The Fantom-X features a dynamic pad bank that is sensitive to
velocity and aftertouch. They can be used as trigger pads to play
favorite sounds like hits or bass sounds, to recall RPS sequence
phrases, or assigned to play skip back-sampled phrases. In another
idea, rhythm sounds that were “chopped” from a loop phrase can be
assigned to the pads and played for realtime input into the
sequencer.
Mastering functionality
78 different multi-effects, chorus, and reverb are provided. Since the
mastering effects that are indispensable as the final step of the music
production process are also provided, you can create songs with a
level of quality that approaches a commercially released CD.
V-LINK functionality
V-LINK lets you synchronize music and images to create completely
new forms of expression. Realtime controllers such as the D Beam
controller and the dynamic pads can be used to control images while
you perform music.
Fantom-X Editor/Librarian included
The included editor and librarian software lets you edit and manage
Fantom-X sounds from your computer.
16
Panel Descriptions
fig.01-001
D BEAM
D BEAM
Switches D Beam function on/off. You can apply a variety of effects
to sounds simply by moving your hand. -> (p. 121)
[ASSIGNABLE]
You can assign a variety of parameters and functions to D Beam to
modify the sound in realtime. -> (p. 122)
[PAD TRIGGER]
Instead of striking the pads themselves, you can also use the D Beam
controller to control the sounding of the pads. -> (p. 122)
[SOLO SYNTH]
Play the Fantom-X as a monophonic synthesizer. -> (p. 123)
* Hold down [SHIFT] and press one of the corresponding buttons to
access the D BEAM setting screen.
EXT SOURCE
[MIX IN]
Switches the external input on/off. -> (p. 141)
* Hold down [SHIFT] and press this button to access the external
source setting screen.
LEVEL knob
Controls the volume of the external input.
PEAK indicator
This will light when the volume of the external input is too high.
VOLUME / V-LINK
VOLUME
Adjusts the overall volume that is output from the rear panel
OUTPUT A (MIX) jacks and PHONES jack. -> (p. 21)
[V-LINK]
Switches the
V-LINK function
on/off.
-> (p. 238)
* Hold down [SHIFT] and press [V-LINK] to access the V-LINK setting
screen.
REALTIME CONTROL
[ ]REALTIME CONTROL knob
Depending on the parameter or function that is assigned,
you can use
the knobs to modify the sound in realtime. -> (p. 47)
[ ], [ ]ASSIGNABLE switch
You can assign a variety of parameters and functions to these two
buttons. Use them to switch the parameters and functions to modify
the sound in realtime. -> (p. 122)
[RPS]
Switches RPS on/off.
-> (
p. 203
)
* Hold down [SHIFT] and press (or rotate) one of the above switches (or
knob) to access the corresponding setting screen.
[-OCT], [+OCT]
Transposes the pitch of the keyboard in 1 octave units (-3- +3 octaves).
ARPEGGIO / RHYTHM
[CHORD MEMORY]
Switches the CHORD MEMORY on/off.
-> (
p. 133
)
[RHYTHM]
Switches the RHYTHM on/off.
-> (
p. 135
)
[ARPEGGIO]
Switches the ARPEGGIO on/off.
-> (
p. 128
)
* Hold down [SHIFT] and press one of the corresponding buttons to access
CHORD MEMORY, RHYTHM or ARPEGGIO settings screen.
[ARP HOLD]
Switches the Arpeggio Hold function on/off.
BEAT (Beat Indicator)
This blinks in sync with the tempo and beat.
SEQUENCER
Perform sequencer operations such as playback and record.
[RESET]
Moves the song position to the top. If you press this during playback,
you will return to the beginning of the song and stop. -> (p. 165)
[BWD]
Moves the song position to the first beat of the previous measure. ->
(p. 165)
[FWD]
Moves the song position to the first beat of the next measure. -> (p.
165)
[Play]
Controls sequencer play.
Front Panel
112
2 4
3
5
6
7
8
910
11
13
14
15
1
2
3
4
5
6


Produkt Specifikationer

Mærke: Roland
Kategori: Ikke kategoriseret
Model: Fantom X6

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland Fantom X6 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Roland Manualer

Roland

Roland KS-V7 Manual

30 December 2025
Roland

Roland PDQ-8 Manual

22 December 2024
Roland

Roland CYQ-12 Manual

21 December 2024
Roland

Roland PDQ-8S Manual

21 December 2024
Roland

Roland EARTH Piano Manual

19 December 2024
Roland

Roland PD-9 Manual

10 December 2024
Roland

Roland FRP-NUVOLA Manual

10 December 2024
Roland

Roland P-6 Manual

10 December 2024
Roland

Roland MDS-12 Manual

9 December 2024
Roland

Roland PM-10 Manual

9 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer