Roland SYS-500CS Manual
Roland
Syntesemaskine
SYS-500CS
Læs nedenfor 📖 manual på dansk for Roland SYS-500CS (1 sider) i kategorien Syntesemaskine. Denne guide var nyttig for 45 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
English
Owner’s Manual
Before using this unit, carefully read leaet “USING THE UNIT SAFELY.”
Copyright © 2015 ROLAND CORPORATION
Model SYS-512 SYS-521 SYS-530 SYS-540 SYS-572
Current Draw 70 mA (+12 V)
55 mA (-12 V)
40 mA (+12 V)
40 mA (-12 V)
50 mA (+12 V)
35 mA (-12 V)
85 mA (+12 V)
50 mA (-12 V)
110 mA (+12 V)
90 mA (-12 V)
Power Supply Eurorack power
Dimensions 80.8 (W) × 128.5 (D) × 57.2 (H) mm
3-3/16 (W) x 5-1/16 (D) x 2-1/4 (H) inches
Weight 212 g 203 g 194 g 202 g 213 g
8 oz 8 oz 7 oz 8 oz 8 oz
Accessories Owner’s Manual, Leaet “USING THE UNIT SAFELY,” Installation screws (4 pcs.), Eurorack power cable
In the interest of product improvement, the specications and/or appearance of this unit are subject to change without prior notice.
Main Specications Roland SYSTEM-500 (SYS-512, SYS-521, SYS-530, SYS-540, SYS-572) : Eurorack Modular
The documentation for this unit consists of the following materials.
5USING THE UNIT SAFELY (separate leaet)
Read this rst. It contains notes that you must observe in order to use the unit correctly.
5Owner’s Manual (this document)
This explains how to make connections, and describes the specications of the unit.
5Parameter Guide (English PDF)
This explains the various parts of the unit. Download it as described at right.
About the Manuals
CV stands for “Control Voltage,” an electrical signal (control voltage) that modies
the behavior of an analog synth or Eurorack module. GATE is a trigger signal that
controls the beginning and end of an envelope or other control voltage.
CV / GATE Input
Use the included screws (4 pcs.) to attach the unit to your Eurorack case at the
locations indicated.
CAUTION
7Keep small items out of the reach of
children
To prevent accidental ingestion
of the parts listed below, always
keep them out of the reach of small
children.
5Included Parts: Eurorack installation screws
Installing in a Eurorack Case
By using the included Eurorack power cable, you can operate this unit on the
Eurorack’s system power supply (+12 V).
1. Grasp the 16-pin connector of the Eurorack power cable, and insert it into
the Eurorack’s power connector so that the red wire is aligned with the -12
V pin.
2. Grasp the 10-pin connector of the Eurorack
power cable, and insert it into the unit’s
power connector so that the red wire is
aligned with the white line on the unit.
RED SIDE
RED SIDE
WHITE LINE
WARNING
7Electrocution hazard
* Always turn the Eurorack unit o and unplug the power cord
before plugging the Eurorack power cable.
* Do not touch the electrical terminals when attaching the Eurorack power
cable.
Using a Eurorack Power Cable
Obtaining the owner’s manual (PDF version)
1. Enter the following URL on your computer.
http://www.roland.com/manuals/
2. Select the name of your product.
* 5 1 0 0 0 4 7 2 8 8 - 0 1 *
Produkt Specifikationer
Mærke: | Roland |
Kategori: | Syntesemaskine |
Model: | SYS-500CS |
Bredde: | 481 mm |
Dybde: | 135 mm |
Højde: | 157 mm |
Vægt: | 3400 g |
Produktfarve: | Sort |
Produkttype: | Analog synthesizer |
Strømkilde type: | Vekselstrøm |
AC-adapter inkluderet: | Ja |
Strømledning inkluderet: | Ja |
Har du brug for hjælp?
Hvis du har brug for hjælp til Roland SYS-500CS stil et spørgsmål nedenfor, og andre brugere vil svare dig
Syntesemaskine Roland Manualer
3 Maj 2024
16 April 2024
15 April 2024
26 Marts 2024
28 Oktober 2023
22 September 2023
17 Juli 2023
14 Juni 2023
2 Januar 2023
27 December 2022
Syntesemaskine Manualer
- Syntesemaskine Moog
- Syntesemaskine Pioneer
- Syntesemaskine Behringer
- Syntesemaskine Yamaha
- Syntesemaskine Casio
- Syntesemaskine Korg
- Syntesemaskine Arturia
- Syntesemaskine Dreadbox
- Syntesemaskine AAS
- Syntesemaskine Waldorf
- Syntesemaskine Modal Electronics
- Syntesemaskine Nord
- Syntesemaskine ELTA Music
Nyeste Syntesemaskine Manualer
30 September 2024
29 August 2024
30 Juli 2024
30 Juli 2024
7 Juli 2024
10 Juni 2024
29 Maj 2024
28 Maj 2024
26 Maj 2024