Roland SYS-530 Manual

Roland Syntese maskine SYS-530

Læs nedenfor 📖 manual på dansk for Roland SYS-530 (1 sider) i kategorien Syntese maskine. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

English

Owner’s Manual

Before using this unit, carefully read leaet “USING THE UNIT SAFELY.”

Model SYS-512 SYS-521 SYS-530 SYS-540 SYS-572

Current Draw 70 mA (+12 V)

55 mA (-12 V)

40 mA (+12 V)

40 mA (-12 V)

50 mA (+12 V)

35 mA (-12 V)

85 mA (+12 V)

50 mA (-12 V)

110 mA (+12 V)

90 mA (-12 V)

Power Supply Eurorack power

Dimensions 80.8 (W) × 128.5 (D) × 57.2 (H) mm

3-3/16 (W) x 5-1/16 (D) x 2-1/4 (H) inches

Weight 212 g 203 g 194 g 202 g 213 g

8 oz 8 oz 7 oz 8 oz 8 oz

Accessories Owner’s Manual, Leaet “USING THE UNIT SAFELY,” Installation screws (4 pcs.), Eurorack power cable

In the interest of product improvement, the specications and/or appearance of this unit are subject to change without prior notice.

Main Specications Roland SYSTEM-500 (SYS-512, SYS-521, SYS-530, SYS-540, SYS-572) : Eurorack Modular

The documentation for this unit consists of the following materials.

5USING THE UNIT SAFELY (separate leaet)

Read this rst. It contains notes that you must observe in order to use the unit correctly.

5Owner’s Manual (this document)

This explains how to make connections, and describes the specications of the unit.

5Parameter Guide (English PDF)

This explains the various parts of the unit. Download it as described at right.

About the Manuals

CV stands for “Control Voltage,” an electrical signal (control voltage) that modies

the behavior of an analog synth or Eurorack module. GATE is a trigger signal that

controls the beginning and end of an envelope or other control voltage.

CV / GATE Input

Use the included screws (4 pcs.) to attach the unit to your Eurorack case at the

locations indicated.

CAUTION

7Keep small items out of the reach of

children

To prevent accidental ingestion

of the parts listed below, always

keep them out of the reach of small

children.

5Included Parts: Eurorack installation screws

Installing in a Eurorack Case

By using the included Eurorack power cable, you can operate this unit on the

Eurorack’s system power supply (+12 V).

1. Grasp the 16-pin connector of the Eurorack power cable, and insert it into

the Eurorack’s power connector so that the red wire is aligned with the -12

V pin.

2. Grasp the 10-pin connector of the Eurorack

power cable, and insert it into the unit’s

power connector so that the red wire is

aligned with the white line on the unit.

RED SIDE

WHITE LINE

WARNING

7Electrocution hazard

* Always turn the Eurorack unit o and unplug the power cord

before plugging the Eurorack power cable.

* Do not touch the electrical terminals when attaching the Eurorack power

cable.

Using a Eurorack Power Cable

Obtaining the owner’s manual (PDF version)

1. Enter the following URL on your computer.

http://www.roland.com/manuals/

2. Select the name of your product.

* 5 1 0 0 0 4 7 2 8 8 - 0 1 *

Produkt Specifikationer

Mærke:	Roland
Kategori:	Syntese maskine
Model:	SYS-530
Bredde:	81 mm
Dybde:	58 mm
Højde:	129 mm
Vægt:	194 g
Produktfarve:	Sort
Produkttype:	Analog synthesizer
Strømkilde type:	DC
Strømledning inkluderet:	Ja