Roland TM-1 T Manual

Roland Ikke kategoriseret TM-1 T

Læs nedenfor 📖 manual på dansk for Roland TM-1 T (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 23 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Panel Descriptions

Top Panel

Display

Indicates the kit number.

The set of instruments played by TRIG1 and TRIG2 is called a “ki t.”

& “Kit List (15 Kits)”

Trigger indicators (TRIG1/TRIG2)

When TRIG1/TRIG2 respond, the corresponding trigger indicator changes lit

0 unlit.

When the maximum trigger input occurs, the display’s (decimal point) also “ . ”

changes lit unlit. This is useful when you’re adjusting the trigger sensitivity.0

[MODE SELECT] button

Each time you press the [MODE SELECT] button, the operating

mode of the [–] [+] switches will change.

Trigger indicator Mode

Lit PREVIEW mode

Unlit KIT mode

[–] [+] switch

The operation of these switches changes according to the mode.

Switch KIT mode

Trigger indicator unlit

PREVIEW mode

Trigger indicator lit

[–]

Switches to the previous

kit.

*Long-press the switch to

switch through kits in rapid

succession.

Plays the TRIG1 instru-

ment.

[+]

Switches to the next kit.

*Long-press the switch to

switch through kits in rapid

succession.

Plays the TRIG2 instru-

ment.

In kit mode, by pressing the simultaneously, [–] [+] switches

turns mute on/o.

*When mute is turned on, the trigger indicator blinks, and the input triggers no

longer respond. This is convenient when you want to quickly disable the triggers.

MEMO

In kit mode, you can use the dedicated app to freely assign a

variety of functions.

Switching kits when in preview mode

Change to kit mode, switch kits, and then return to preview

mode.

Edit knobs (TRIG1/TRIG2)

Knob Explanation

[SENS]

Turning this toward the left lowers the sensitivity, so

that you must strike strongly to get a response. Turing

this toward the right raises the sensitivity, making it

easier to get a response even for soft strikes.

*If you’re using a footswitch, turn the [SENS] knob

all the way to the left (to the F.SW position).

[PITCH] Adjusts the pitch of the instrument.

[DECAY ] Adjusts the duration of the instrument’s sound.

[LEVEL] Adjusts the volume of the instrument.

With the default settings, the values of the [PITCH], [DECAY], and

[LEVEL] knobs are applied to all kits; however, you can change

a setting so that knob values can be specied individually for

each kit.

& “System Settings” (Knob Setting)

MEMO

If there are loud sounds nearby, such as when you’re using acoustic drums, external sounds or vibration might falsely trigger sound when you’re not playing the triggers.

You can prevent false triggering in the following ways.

5 By adjusting the position or angle at which the trigger is attached, move it farther away from the source of vibration

5 Use the [SENS] knob to lower the sensitivity of the trigger

Rear Panel

(Connecting Your Equipment)

* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.

DC IN jack

USB port

AC Adaptor

Computer/Smartphone/USB AC adapter

OUTPUT jack

PHONES jack

Mixer/Speaker

Headphones

[POWER] switch

& “Turning the TM-1 On”

TRIG IN jacks

Connect trigger input pads or footswitches here. The TRIG IN jacks support head/bow shots (they do not support rim/edge). Connecting a dual trigger pad

If you’re using the rim and edge of the pad, use an insert cable (stereo phone

# mono phone x 2) (one pad can be connected).

Connect the cable’s L/R plugs to the TRIG IN 1/2 jacks of the TM-1.

*You’ll need to make settings in the dedicated app.

PDX-8

Mono phone ×2

Stereo phone

Separately sold PCS-31L

commercially available cable

You can choose whether the OUTPUT jack will output

the mixed sound in mono or output the sound of each

trigger separately to left and right.

& “System Settings” (Output Setting)

5Make connections using the stereo cable

included with the pad or using a commercially

available cable (stereo phone # stereo phone).

5If you’re using a footswitch, set the [SENS] knob

to the F.SW position.

5If using the BT-1, you’ll need to make settings in

the dedicated app.

RT-30KKT-10 FS-5UBT-1

Pads Footswitch

NOTE

5 If you’re connecting to an iOS device (iPhone/iPad), you’ll need Apple’s Lightning - USB camera adapter.

5 If you’re connecting to an Android device, you’ll need a cable that’s equipped with the appropriate connector for your device. However, we cannot guarantee operation with all Android

devices.

Bottom Panel (Changing the Battery)

1. Remove the lid of the battery cover

located on the bottom of the unit.

2. Remove the old battery from the

compartment and remove the snap

cord connected to it.

3. Connect the snap cord to the new

battery, and place the battery inside

the compartment.

* Make sure the and ends of the battery are oriented correctly.“+” “-”

4. Securely close the battery cover.

Use of Battery

* Zinc-carbon batteries cannot be used. You must use alkaline batteries.

* The battery life is approximately three hours for typical performance. When the battery runs

low, the display blinks. Replace the battery as soon as possible.

* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you

carefully observe all of the items related to batteries that are listed in “USING THE UNIT

SAFELY” “IMPORTANT NOTES” “USING THE UNIT SAFELY” and (leaet ).

* The life of the supplied batteries may be limited, since its primary purpose was to enable

testing.

* When turning the unit over, be careful so as to protect the buttons and knobs from damage.

Also, handle the unit carefully; do not drop it.

Turning the TM-1 On

The TM-1 can operate on battery power or a separately sold AC adaptor, or on USB

bus power or a USB AC adapter.

* Before turning the unit on/o, always be sure to turn the volume down. Even with the

volume turned down, you might hear some sound when switching the unit on/o. However,

this is normal and does not indicate a malfunction.

1. Set the to the [POWER] switch “DC/BATTERY” or “USB” position.

Power supply type Switch Explanation

AC adaptor (sold separately)

DC/BATTERY

The unit operates on a battery or a separately sold AC

adaptor.

If a battery and an AC adaptor are both connected, the AC

adaptor takes priority.

Dry battery

USB bus power/

USB AC adapter USB

Connect the unit to a powered USB port of your computer,

or to a USB AC adapter.

*If the unit is connected to a smartphone, use the “DC/

BATTERY” setting.

2. Power-on the connected equipment, and raise the volume to an

appropriate level.

Turning O the Power

1. Power-o the connected equipment, and set the [POWER] switch to

the “OFF” position.

Setting the Dynamics of the Triggers

For each kit, you can individually adjust the dynamics of TRIG1 and TRIG2.

The volume changes according to the strength of your strike.

1. Hold down the until the display blinks.[MODE SELECT] button

2. Press the (TRIG1) or the (TRIG2).[–] switch [+] switch

Each time you press the switch, the dynamic setting changes (1 02 03 0 4 0

1 ).0

The setting provides natural volume change. The and settings make it “1” “2” “3”

easier to produce loud sounds, and the setting xes the volume at maximum.“4”

Switch Value Explanation

[–] switch 1 4 (minimum)– (max-

imum)

Adjusts the dynamics of TRIG1.

[+] switch Adjusts the dynamics of TRIG2.

3. Press the .[MODE SELECT] button

You exit settings mode.

System Settings

You can edit the following settings.

1. Power-o the TM-1.

2. While holding down the , turn on the power.[MODE SELECT] button

When the display shows “o ,” the unit is in system settings mode.

Setting item Controller Explanation

Output Setting [–] switch

Selects the output method for the OUTPUT jack.

MIX: Trigger indicators (1/2) unlit

The mixed sound is output in mono.

INDIVIDUAL: Trigger indicators (1/2) lit

Each trigger is output separately to left and right

(TRIG1: L-side / TRIG2: R-side).

Knob Setting

[+] switch

Allows you to specify the knob values individually for each kit.

GLOBAL: Trigger indicators (1/2) unlit

The values of the [PITCH], [DECAY], and [LEVEL] knobs apply to all kits.

* For the [SENS] knobs, the GLOBAL setting is always used.

INDIVIDUAL: Trigger indicators (1/2) lit

The knob values can be specied individually for each kit. When you

switch kits, the values of the kit are applied.

You can specify the kit values by operating the knobs or by using the

dedicated app.

3. When you have nished making settings, turn the power o and

then on again.

The edited settings are saved automatically.

MEMO

By connecting this unit via a USB cable to your computer or smartphone and using

the dedicated app, you can replace the internal sounds with audio les (samples) of

drum sounds or sound eects that you created on your computer.

The dedicated app (TM-1 Editor) can be downloaded from the App Store if you’re

using an iOS device, or from Google Play if you’re using an Android device.

If you’re using a computer, you can download it from the following URL.

https://www.roland.com/support/

Access the URL, and search for as the product name.“TM-1”

* If you use the dedicated app to load other sounds, the original sounds are overwritten. Since

the dedicated app contains the factory-set data, you can reload it when you wish.

NOTE

If you set the [POWER] switch to “USB” and connect the unit to your smartphone, a

warning dialog box might appear. In this case, disconnect the unit from the smart-

phone (for an iPhone/iPad, disconnect the camera adaptor from your iPhone/iPad),

set the [POWER] switch to the “DC/BATTERY” position, use a battery or the AC adaptor

to power-on the TM-1, and then connect it once again to your smartphone.

Kit List (15 Kits)

No. Instrument

TRIG1 TRIG2

1 Rock Kick Rock Snare

2 Metal Kick Metal Snare

3 Fat Kick Fat Snare

4Heavy Rock

Kick

Heavy Rock

Snare

5 Funk Kick Funk Snare

No. Instrument

TRIG1 TRIG2

6Alt-Rock

Kick

Alt-Rock

Snare

7Hip Hop

Kick

Hip Hop

Snare

8R&B Kick R&B Finger

Snap

g Trap Kick Trap Snare

A 80s Kick 80s Snare

No. Instrument

TRIG1 TRIG2

BBig Room

Kick

Big Room

Snare

C House Kick House Clap

D Dance Kick Dance Clap

E 808 Cymbal Synth Loop

FSplash

Cymbal Shaker Loop

Main Specications

Roland TM-1: Trigger Module

Expected battery life

under continuous

use

Alkaline: Approximately 3 hours

*These can vary depending on the specications of the batteries, capacity of the batteries,

and the conditions of use.

Current Draw 100 mA (DC IN) / 250 mA (USB)

Dimensions 150 (W) x 95 (D) x 60 (H) mm

5-15/16 (W) x 3-3/4 (D) x 2-3/8 (H) inches

Weight 550 g / 1 lb 4 oz

Accessories Owner’s Manual, Leaet (“USING THE UNIT SAFELY,” “IMPORTANT NOTES”), Dry battery

(6LR61 (9 V) Type), USB cable (type B)

Options AC adaptor (PSA-S series)

* This document explains the specications of the product at the time that the document was

issued. For the latest information, refer to the Roland website.

–

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY”). After reading, keep the

document(s) where it will be available for immediate reference.

English

Produkt Specifikationer

Mærke:	Roland
Kategori:	Ikke kategoriseret
Model:	TM-1 T

Har du brug for hjælp?

Hvis du har brug for hjælp til Roland TM-1 T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Roland Manualer

Roland M-1000 Manual

12 Oktober 2024

Roland Fantom FA-76 Manual

11 Oktober 2024

Roland KD-200 Manual

7 Oktober 2024

Roland RD-88 EX Manual

25 September 2024

Roland RD-2000 EX Manual

25 September 2024

Roland KT-10 Manual

22 September 2024

Roland VH-14D Manual

19 September 2024

Roland CB-R09S Manual

16 September 2024

Roland UA-100 Manual

12 September 2024

Roland GP609 Manual

9 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron Overbridge Manual

26 November 2024

Elektron Sidstation Manual

26 November 2024

SKROSS World Adapter Pro+ Manual

26 November 2024

SKROSS PRO – World & USB Manual

26 November 2024

SoundTube IPD-RS82-EZ Manual

26 November 2024

Kramer 4x1VB Manual

26 November 2024

Kramer RC-63A Manual

26 November 2024

SoundTube IPD-HP82-EZ Manual

26 November 2024

Kramer RK-KVM-1U-PP3 Manual

26 November 2024

Gioteck VX-2 (PS3) Manual

26 November 2024