Ross CCK3-RO Manual

Ross Coax-kabel CCK3-RO

Læs nedenfor 📖 manual på dansk for Ross CCK3-RO (1 sider) i kategorien Coax-kabel. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Co-Axial Plug Connector Kit
Model Number: CCK3-RO
User Manual
Please read this manual thoroughly before using your Ross Co-Axial Plug Connector Kit and then retain for future reference
Contents:
2 x Coax Plugs
1 x Coax Coupler
Assembly Instructions for TV/FM Plugs on Coax Cable:
1. Cut Coaxial cable to desired length (always use the shortest lengths possible for the best signal transfer)
2. Unscrew coax plug and open cable grip “jaws
3. Slide cap and cable grip over Coax cable
4. Strip away 10cm of outer insulation
5. Peel back the braid and/or foil in order to uncover the inner insulation
6. Strip away 5mm of inner insulation to uncover the copper wire
7. Position the inner connector over the centre copper wire, and secure it be tightening the connector screw
8. Position the outer plug connector over the inner plug connector and push the briad and/or foil back
over the cable grip
9. Screw the plug cap back on the outer connector
10. Now repeat at the other end
The couple included allows you to join coaxial cables together or change the sex of the cable if required.
Coaxial plug wiring instructions:
Technical Support UK: 0845 194 7584 • Email: help@ross.co.uk


Produkt Specifikationer

Mærke: Ross
Kategori: Coax-kabel
Model: CCK3-RO

Har du brug for hjælp?

Hvis du har brug for hjælp til Ross CCK3-RO stil et spørgsmål nedenfor, og andre brugere vil svare dig