Rupert Neve Designs R10 Manual


Læs nedenfor 📖 manual på dansk for Rupert Neve Designs R10 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
R10
Ten Space 500 Series Rack
Thank you for your purchase of the R10: Ten Space 500 Series Rack. Everyone at Rupert Neve Designs hopes
you enjoy using this tool as much as we have enjoyed designing and building it.
Usage Notes
The R10 has 10 x 500 series slots, with ample power, and both XLR and TRS inputs and outputs in a
rackmountable 3RU steel chassis. To use the R10, carefully slide each 500 series module in such that the
edge connector card fits snuggly into the slot in the back, and tighten both front panel screws for each
module. The current draw meter will display the total current being used by the installed modules. The
R10 has dual XLR and TRS inputs and outputs. With regard to the parallel XLR and TRS connectors, it is
recommended to connect ONLY ONE input on a given channel at a time (including to a patchbay). For the
outputs, it is generally not problematic to use both outputs to send a signal to two different destinations,
however for different modules, longer cable runs and different destinations, using both outputs in parallel
may cause issues, so be aware when using both outputs simultaneously.
Link
To enable VCA linking between modules, reset the corresponding jumper located by the card slots to the
LINK position. The linking function is set in pairs so that you can link channels 1-2, 3-4, ....etc.. The link func-
tion is typically used to link the VCA circuitry of compressors (such as our 543 module). Most other types of
modules are not linkable unless specifically noted by the manufacturer.
R10 Specifications
DC Voltage to Units +/-16VDC and +48VDC for phantom power
Max Output Current 2650mA total (2400mA modules and 250mA for phantom power)
Power Requirements 100-240VAC, 50/60Hz, 120 Watts
Weight 14lbs
Dimensions 19” long x 7.5”deep x 5.5” high
P/N 775-00029, Rev A


Produkt Specifikationer

Mærke: Rupert Neve Designs
Kategori: Ikke kategoriseret
Model: R10

Har du brug for hjælp?

Hvis du har brug for hjælp til Rupert Neve Designs R10 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Rupert Neve Designs Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Wagner

Wagner 2K Smart Manual

4 November 2024
Moen

Moen EB500-E Manual

3 November 2024
Moen

Moen Aspen 5824CH Manual

3 November 2024
Luxman

Luxman MQ-88uSE Manual

3 November 2024
Luxman

Luxman CL-38uSE Manual

3 November 2024
Luxman

Luxman CL-1000 Manual

3 November 2024
Moen

Moen Aspen 5802CH Manual

3 November 2024
Luxman

Luxman SQ-38u Manual

3 November 2024
Moen

Moen Aspen 5818CH Manual

3 November 2024