Rutec VARDAflex Double Nano P66 24 V Manual

Rutec lampe VARDAflex Double Nano P66 24 V

Læs nedenfor 📖 manual på dansk for Rutec VARDAflex Double Nano P66 24 V (1 sider) i kategorien lampe. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
(Plus/Double) Nano IP66 24 V
The ( is suitable for indoor installation and in wetPlus/Double) Nano IP66 24V
rooms.
Risk of electric shock!
Be sure to have a professional electrician complete installation. There is no warranty cove-
rage for any lights installed without observing European safety directives.
Caution!
Only connect the LED board to a suitable power supply (24 V DC).
Only operate when completely unrolled.
Connect LED boards in parallel.
Delivery includes
(Plus/Double) Nano IP66 24V
01 x (0,5m/1m/2m/5m) LED board
1 x connector male
1 x connector female
Technical data
Power supply 24 V power supply with
constant output voltage.
Power 4,8W/m Nano IP66
9,6W/m Plus Nano IP66
19,2W/m Double Nano IP66
Current strength 0,2A/m Nano IP66
0,4A/m Plus Nano IP66
0,8A/m Double Nano IP66
Radiation angle 120°
Quantity LED 60/m Nano IP66
120/m Plus Nano IP66
120/m Double Nano IP66
Length Maximum 10 metres per connection.
(RGB Nano IP66: 8 metres
Dimensions 500 x 8 mm
1000 x 8 mm
2000 x 8 mm
5000 x 8 mm
(500/1000/2000/5000 x 10mm Double Nano)
Bending radius 20 mm
Safety class 3 - low voltage protection
Compliant with the applicable
European CE directives.
Montage
Risk of electric shock!
Switch off voltage prior to installation. Ensure that voltage cannot be accidentally switched
on again.
Mounting (Plus/Double) Nano IP66 24V
Caution!
On conducting surfaces, place an insulation layer between the LED board and surface.
Surfaces must be flat, free of dust, grease and dry.
1. Prepare surface.
2. Peel off adhesive film and gently press on LED board, do not press directly on the LEDs.
3. Connect LED board to power supply.
Caution!
It is NOT possible to shorten the LED board!
The LED board ist NOT UV-resistant!
Caution!
Only use neutral cross-linked silicon (never use silicon which includes vinegar!).
Disposal
Dispose of electrical and electronic equipment in an environmentally friendly manner. Please
contact your local council for further information.
G G
Carl-Zeiss-Str. 15
D-28857 Syke
07/2017


Produkt Specifikationer

Mærke: Rutec
Kategori: lampe
Model: VARDAflex Double Nano P66 24 V

Har du brug for hjælp?

Hvis du har brug for hjælp til Rutec VARDAflex Double Nano P66 24 V stil et spørgsmål nedenfor, og andre brugere vil svare dig




lampe Rutec Manualer

lampe Manualer

Nyeste lampe Manualer