RYOBI RYi150BG Manual

RYOBI Ikke kategoriseret RYi150BG

Læs nedenfor 📖 manual på dansk for RYOBI RYi150BG (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
OPERATION
APPLICATIONS
You may use this product for the following purposes:
Operating and charging USB-powered devices
Supplying electrical power for operating compatible small electronics such as
cell phones, tablets, laptops, LED lights, small fans, radios, etc.
NOTE: This device is not compatible for use with appliances, power tools, air
conditioners, sump pumps, compressors, and/or other larger electrical devices.
INSTALLING/REMOVING BATTERY PACK
See Figure 1.
To install: insert a battery pack into the power source as shown. Make sure
the latches on the battery pack snap into place and the battery pack is secured
in the power source before beginning operation.
To remove: depress the latches on the battery pack.
USING THE POWER SOURCE
See Figure 2.
When a battery pack is installed, this power source converts DC electricity to
120V AC household power and/or 5 volt DC USB (up to 2.4 amp) charging power,
allowing the user to charge and power a variety of devices.
WARNING:
Risk of electric shock. When using a grounded appliance this tool will not
provide an electrical path to earth ground. Do not power devices with dam-
aged or frayed power cords.
Insert a battery pack into the power source.
Press and hold the power button ( ) for three seconds to turn the power
source . The LED will light up green when ready to use.ON
Plug devices you want to power or charge into the power source’s USB ports
and/or 120 volt receptacle.
If the power button LED blinks red then turns off, the power source may be
overloaded. Disconnect your device, make sure your battery pack is suf-
ciently charged to power your device, then press the button to turn the power
source back on. Reconnect your device and try again. If the fault condition
immediately reoccurs, the item being powered exceeds the capacity of the
power source.
If the power button LED turns red but does not shut down the power source,
the power source is overheated. Allow the unit to cool until the LED turns
green, then try again.
If the power button LED ashes yellow, the battery pack needs to be
recharged.
To use the worklight, press the light button ( ). Press the light button a second
time to make the light blink. Press the light button again to turn off the worklight.
The power source must be on for the worklight to function.NOTE:
When nished, disconnect your device and press the power button indicator
( ) again for three seconds to turn off the power source.
NOTE: When needed, an internal cooling fan will run to regulate the unit’s operat-
ing temperature. If running, always wait for the fan to stop before you disconnect
the battery pack from the power source.
WARRANTY
This product has a Three-year Limited Warranty for personal, family, or
household use (90 days for business or commercial use). For warranty details,
visit www.ryobitools.com or call (toll-free) 1-800-860-4050.
FCC COMPLIANCE
WARNING:
Changes or modications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Fig. 1
995000771
3-24-23 (REV:09)
OPERATOR’S MANUAL
18V POWER SOURCE
IMPORTANT SAFETY INSTRUCTIONS
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instruc-
tions listed below may result in electric shock, re and/or serious injury.
SAVE THESE INSTRUCTIONS - This manual contains important safety and
operating instructions for power source model RYi150BG.
CAUTION:
The output of this device is not sinusoidal. It has a total harmonic distortion
of 40 percent and maximum single harmonic of 30 percent.
For use with RYOBI 18V battery packs, see tool/appliance/battery pack/
charger correlation supplement 987000-432.
Do not expose the power source to rain or wet conditions. Water entering
the power source will increase the risk of electric shock.
Do not use the power source if it has been dropped or received a sharp
blow. A damaged power source will increase the risk of re.
Remove the battery pack from the power source when not in use.
Do not expose to rain or use in damp locations.
Do not disassemble the power source.
To reduce the risk of injury, close supervision is necessary when an appli-
ance is used near children.
Store power source indoors and away from children.
As with all electrical devices, use caution when plugging/unplugging other
devices into this unit. Do not force plugs into this unit.
If this unit is used in a manner not specified by the manufacturer, the
protection provided by this equipment may be impaired.
 Do not overload the power source. It must be used for powering devices
less than the product rating.
Two- or three-prong plugs may be used with this product. Do not force
a polarized plug (one prong larger than the other) into this product. Flip plug
over and retry.
Never block air vents. Blocked vents may cause overheating. Power source
will automatically shut off when overheated.
Do not place near heat vents or in direct sunlight. Keep power source cool.
Do not use the power source around flammable fumes and gasses, such
as in the bilge of a boat or near propane tanks.
Do not put foreign objects into the power source.
Operate this product using only the AC power type listed in the product
specifications.
This unit should never be hard wired into a circuit.
Do not power life support devices or other necessary medical equipment
with this power source.
Save these instructions. Refer to them frequently and use them to instruct
others who may use this product. If you loan someone this product, loan them
these instructions also.
PRODUCT SPECIFICATIONS
Watts 150 Watts Continuous .................................................................................
DC Input 18 Volts DC ............................................................................................
AC Output 120 Volts, 1.25 Amps ..........................................................................
USB Output 5 Volt (2.4 Amp) DC ...........................................................................
Output Wave Form Modied Sine Wave ...............................................................
RYi150BG
A - Battery pack (not included) [bloc-piles (non inclus), paquete de baterías (no suministrado)]
B - Depress latches to release battery pack (appuyer sur les loquets pour libérer le bloc-piles,
para soltar el paquete de baterías oprima los pestillos)
C - Power source (bloc d’alimentation, fuente de alimentación)
Fig. 2
C
B
B
A
A - Power button (bouton d’alimentation, botón de encendido)
B - Light button (bouton de lumière, botón de luz)
C - 120 V receptacle (réceptacle 120 V, receptáculo de 120 voltios)
D - AC product to be powered (not provided) [produit à alimenter (non fourni), producto de CA
para ser alimentado (no provisto)]
E - 2.4 amp USB ports (ports USB 2,4 A, puertos USB de 2,4 A)
F - USB product to be charged (not provided) [produit USB à charger (non fourni), producto USB
a cargar (no provisto)]
TTI OUTDOOR POWER EQUIPMENT, INC.
P.O. Box 1288, Anderson, SC 29622, USA
1-800-860-4050 www.ryobitools.com
AB
CD
A
B
E
F
ILLUSTRATIONS / ILLUSTRÉES / ILUSTRADAS
NOTE: The grantee is not responsible for any changes or modications not
expressly approved by the party responsible for compliance. Such modications
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated
power (e.i.r.p.) is not more than that necessary for successful communication.
Model/item number on product may have additional letters at the end. These letters
designate manufacturing information and should be provided when calling for service.

Produkt Specifikationer

Mærke: RYOBI
Kategori: Ikke kategoriseret
Model: RYi150BG

Har du brug for hjælp?

Hvis du har brug for hjælp til RYOBI RYi150BG stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret RYOBI Manualer

RYOBI

RYOBI One+ P505 Manual

6 September 2024
RYOBI

RYOBI One+ PBLRS01 Manual

6 September 2024
RYOBI

RYOBI One+ PBLJS01 Manual

6 September 2024
RYOBI

RYOBI RB61G Manual

6 September 2024
RYOBI

RYOBI One+ PSBDG01 Manual

6 September 2024
RYOBI

RYOBI One+ RB102G Manual

6 September 2024
RYOBI

RYOBI One+ PSBCK102 Manual

6 September 2024
RYOBI

RYOBI One+ PCL601 Manual

6 September 2024
RYOBI

RYOBI One+ PCL460 Manual

6 September 2024
RYOBI

RYOBI STM501 Manual

6 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024
Lucide

Lucide Casper i 79166/19/12 Manual

23 December 2024
Lucide

Lucide Merlina 78193/30/66 Manual

23 December 2024
Lucide

Lucide Pippa 77583/81/30 Manual

23 December 2024
Lucide

Lucide Pia 45380/04/30 Manual

23 December 2024
Lucide

Lucide Pia 45280/01/30 Manual

23 December 2024
Lucide

Lucide Anaka 45179/03/30 Manual

23 December 2024
Lucide

Lucide Zych 45156/01/97 Manual

23 December 2024