Samsung HW-Q70T Manual
Samsung
Højttalersystem
HW-Q70T
Læs nedenfor 📖 manual på dansk for Samsung HW-Q70T (170 sider) i kategorien Højttalersystem. Denne guide var nyttig for 31 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/170
HW-Q70T
FULL MANUAL
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at www.samsung.com/register
ENG - 2
SAFETY INFORMATION
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Refer to the table below for an explanation of
symbols which may be on your Samsung product.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
This symbol indicates that high voltage
is present inside. It is dangerous to
make any kind of contact with any
internal part of this product.
This symbol indicates that this product
has included important literature
concerning operation and maintenance.
Class II product : This symbol indicates
that it does not require a safety
connection to electrical earth (ground).
If this symbol is not present on a
product with a power cord, the product
MUST have a reliable connection to
protective earth (ground).
AC voltage : This symbol indicates that
the rated voltage marked with the
symbol is AC voltage.
DC voltage : This symbol indicates that
the rated voltage marked with the
symbol is DC voltage.
Caution, Consult instructions for use :
This symbol instructs the user to
consult the user manual for further
safety related information.
WARNING
• To reduce the risk of re or electric shock, do
not expose this appliance to rain or moisture.
CAUTION
•TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
•This apparatus shall always be connected to a
AC outlet with a protective grounding
connection.
•To disconnect the apparatus from the mains,
the plug must be pulled out from the mains
socket, therefore the mains plug shall be
readily operable.
•Do not expose this apparatus to dripping or
splashing. Do not put objects lled with
liquids, such as vases on the apparatus.
•To turn this apparatus off completely, you
must pull the power plug out of the wall
socket. Consequently, the power plug must
be easily and readily accessible at all times.
ENG - 20
05 USING A WIRED CONNECTION TO THE TV
Method 1. Connecting with HDMI
CAUTION
• When both the HDMI cable and optical cable are connected, the HDMI signal is received rst.
• To connect the HDMI cable between the TV and Soundbar, be sure to connect the terminals
marked ARC. Otherwise, the TV sound may not be output.
• Be sure to use the cable with the premium HDMI certication logo. In addition, make sure that
the cable is a certied Type A, high-speed HDMI Ethernet cable. (HIGH SPEED HDMI CABLE
WITH ETHERNET)
Connecting the TV that supports HDMI ARC (Audio Return Channel)
HDMI IN
(ARC)
HDMI TO TV
(eARC/ARC)
Connect to the HDMI IN
(ARC) port of your TV.
HDMI Cable
Bottom of the Soundbar
Connect to the HDMI TO TV
(eARC/ARC) port of the Soundbar
main unit.
Top of the Soundbar
TV ARC
1. With the Soundbar and TV turned off, connect the HDMI cable as shown in the gure.
2. Turn on the Soundbar and TV.
3. “TV ARC” appears in the display window of the Soundbar main unit and the Soundbar plays TV
sound.
• If TV sound is inaudible, press the (Source) button on the remote control or on the top of
the Soundbar to switch to “ ” mode. The screen displays “ ” and “ ” in sequence, D.IN D.IN TV ARC
and TV sound is played.
ENG - 21
• When connecting a Samsung TV that supports the eARC function, “ ” appears on the eARC
display and the sound is heard.
• If “TV ARC” does not appear in the display window of the Soundbar main unit, conrm that the
HDMI cable is connected to the correct port.
• Use the volume buttons on the TV’s remote control to change the volume on the Soundbar.
NOTES
• When you connect the TV that supports the HDMI ARC (Audio Return Channel) to the Soundbar
with an HDMI cable, you can transmit the digital video and audio data without connecting a
separate optical cable.
• We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one
whose diameter is less than 14 mm.
• This function is not available if the HDMI cable does not support ARC.
• When the audio in a broadcast is encoded in Dolby Digital and the “Digital Output Audio Format” on
your TV is set to PCM, we recommend that you change the setting to Dolby Digital. When the
setting on the TV is changed, you will experience better sound quality. (The TV menu may use
different words for Dolby Digital and PCM depending on the TV manufacturer.)
Method 2. Connecting using an Optical Cable
Pre-connection Checklist
• When both the HDMI cable and optical cable are connected, the HDMI signal is received rst.
• When you use an optical cable and the terminals have covers, be sure to remove the covers.
Bottom of the Soundbar
DIGITAL AUDIO IN
(OPTICAL)
OPTICAL OUT
D.IN
Optical Cable
(not supplied)
Top of the Soundbar
ENG - 22
1. With the TV and Soundbar turned off, connect the DIGITAL AUDIO IN (OPTICAL) port on the
Soundbar and the OPTICAL output port on the TV with the optical cable (not supplied), as shown in
the gure.
2. Turn on the Soundbar and TV.
3. Press the (Source) button on the top panel or remote control, and then select the “D.IN” mode.
4. The TV sound is output from the Soundbar.
Using the Q-Symphony Function
For Q-Symphony, the Soundbar syncs with a Samsung TV to output sound through two devices for
optimum surround effect. When the Soundbar is connected, the menu, “ ” appears under TV+Soundbar
the Sound Output menu of the TV. Select the corresponding menu.
D.IN
TV menu
OR
Optical Cable (not supplied)
HDMI Cable
• TV menu example: TV series name + [AV] Soundbar series name (HDMI)
NOTES
• It can operate according to the Codec supported by TV.
• This function is supported only when the HDMI Cable or Optical Cable (not supplied) is connected.
• This function is available in Samsung TVs released in 2020 and some Soundbar models.
ENG - 23
06 USING A WIRELESS CONNECTION TO THE TV
Connecting via Bluetooth
When a Samsung TV is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• Only one Samsung TV can be connected at a time.
• Samsung TV that supports Bluetooth can be connected. Check the specications of your TV.
OR
Top of the Soundbar
BT PAIRING
PAIR
5 Sec
The initial connection
1. Press the PAIR button on the Soundbar remote control to enter the “BT PAIRING” mode.
(OR) a. Press the (Source) button on the top panel and then select “BT”.
“BT” changes to “ ” in a few seconds automatically or changes to “BT PAIRING BT READY” if
there is a connect record.
b. When “BT READY” appears, press and hold the (Source) button on the top panel of the
Soundbar for more than 5 seconds to display “BT PAIRING”.
2. Select Bluetooth mode on the Samsung TV.
(e.g. Home ( ) Settings ( ) Sound Sound Output Bluetooth Speaker List
[AV] Samsung Soundbar Q70T (Bluetooth))
3. Select “[AV] Samsung Soundbar Q70T” from the list on TV’s screen.
An available Soundbar is indicated with “ ” or “ ” on the TV’s Bluetooth device Need Pairing Paired
list. To connect the Samsung TV to the Soundbar, select the message, and then establish a
connection.
• When the Samsung TV is connected, [TV Name] → “BT” appears on the Soundbar’s front display.
4. You can now hear Samsung TV sound from the Soundbar.
• After you have connected the Soundbar to your Samsung TV the rst time, use the “BT READY”
mode to reconnect.
ENG - 24
If the device fails to connect
• If you have an existing Soundbar (e.g., ) on the list of speakers on [AV] Samsung Soundbar Q70T
the Samsung TV, delete it.
• Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the (Source)
button on the top panel or on the remote control and switch to any mode but “BT”.
• Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was
connected before.
• BT PAIRING : In this mode, you can connect a new device to the Soundbar.
(Press the PAIR button on the Soundbar remote control or press and hold the (Source)
button on the top of the Soundbar for more than 5 seconds while the Soundbar is in “BT” mode.)
Notes on Bluetooth connection
• Locate a new device within 1 m to connect via Bluetooth communication.
• If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
• The Soundbar automatically turns off after 18 minutes in the Ready state.
• The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
– If there is a strong electrical eld around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
• Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
ENG - 37
1. Go to the Samsung website
(www.samsung.com) → search for the model
name from the customer support menu
option.
•For more information about update, refer
to Upgrade Guide.
2. Download the upgrade le (USB type).
3. Unzip the le to create a folder with the le
name.
4. Store the created folder in a USB and then
connect it to the Soundbar.
5. Turn on the Soundbar. Then the product is
updated within 3 minutes with displaying the
message, “UPDATE”.
•During update, do not turn it off or
remove the USB.
•If “ ” does not appear on the UPDATE
display window, remove the power cord
from the Soundbar and then reconnect it.
•When the latest version is installed, no
update is performed.
•Depending on the USB type, update may
not be supported.
Initialisation
INIT
Top of the Soundbar
With the Soundbar on, press the (Volume)
buttons on the body at the same time for at least
5 seconds. “ ” appears on the display and then INIT
the Soundbar is initialised.
CAUTION
•All the settings of the Soundbar are
initialised. Be sure to perform this only when
initialisation is required.
DEU - 5
08 Verbinden eines Mobilgeräts 27
Methode 1. Verbindung per Bluetooth ------------------------- 27
Methode 2. Verbinden per Wi-Fi (Drahtloses Netzwerk) ------------------------- 30
09 Verbinden eines Amazon-Produkts 31
Verbinden und Verwenden mit einem Amazon-Produkt (Amazon Echo) ------------------------- 31
Verwenden Sie Stimmbefehle zum Steuern der Soundbar ------------------------- 31
Verwendung von Tap Sound ------------------------- 32
10 Installieren der Wandhalterung 33
Vorsichtsmaßnahmen bei der Installation ------------------------- 33
Komponenten der Wandhalterung ------------------------- 33
11 Installieren der Soundbar über einem
TV-Standfuß 35
Bestandteil ------------------------- 35
12 Software-Update 36
Automatisches Update ------------------------- 36
USB-Update ------------------------- 36
Initialisierung ------------------------- 37
13 Fehlerbehebung 38
14 Lizenz 40
15 Bekanntmachung zu Open Source Lizenzen 40
16 Wichtige Hinweise zum Kundendienst 40
17 SpezikationenundLeitfaden 41
Technische daten ------------------------- 41
Produkt Specifikationer
| Mærke: | Samsung |
| Kategori: | Højttalersystem |
| Model: | HW-Q70T |
Har du brug for hjælp?
Hvis du har brug for hjælp til Samsung HW-Q70T stil et spørgsmål nedenfor, og andre brugere vil svare dig
Højttalersystem Samsung Manualer
6 Juli 2024
5 Juli 2024
5 Juli 2024
5 Juli 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
Højttalersystem Manualer
- Højttalersystem AEG
- Højttalersystem Pioneer
- Højttalersystem Grundig
- Højttalersystem Toshiba
- Højttalersystem Yamaha
- Højttalersystem Auna
- Højttalersystem JBL
- Højttalersystem Sonos
- Højttalersystem Onkyo
- Højttalersystem ION
- Højttalersystem Jamo
- Højttalersystem Paradigm
- Højttalersystem Tevion
- Højttalersystem Humax
- Højttalersystem BW
Nyeste Højttalersystem Manualer
12 Januar 2025
25 August 2024
24 August 2024
24 August 2024
23 August 2024
23 August 2024
23 August 2024
22 August 2024
21 August 2024
21 August 2024