Samsung Techwin SRD-854D Manual

Samsung Overvågningskamera Techwin SRD-854D

Læs nedenfor 📖 manual på dansk for Samsung Techwin SRD-854D (154 sider) i kategorien Overvågningskamera. Denne guide var nyttig for 24 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/154
8 CHANNEL/
16 CHANNEL DVR
User Manual SRD-854D/873D/1653D/1654D/1673D
Copyright
©2013 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or
changed, partially or wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided.
Use of this document and the subsequent results shall be entirely on the user's own responsibility. Samsung Techwin reserves the right to change the
contents of this document without prior notice.
Design and specifications are subject to change without prior notice.
The initial administrator ID is “admin” and the password should be set when logging in for the first time.
Set password for your wireless network if you use the product with a wireless router. Being not protected with password or using the
default wireless router password may expose your video data to potential threat.
Please change your password every three months to safely protect personal information and to prevent the damage of the information
theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
8 Channel/
16 Channel DVR
User Manual
English _3
overview
imporTAnT SAfeTy inSTruCTionS
Read these operating instructions carefully before using the unit.
Follow all the safety instructions listed below.
Keep these operating instructions handy for future reference.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. if the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods
of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
overview
4_ overview
overview
CALIFORNIA USA ONLY
This Perchlorate warning applies only to primary CR (Manganese Dioxide)
Lithium coin cells in the product sold or distributed ONLY in California USA.
“Perchlorate Material - special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate.”
BEFORE START
This manual provides operational information necessary for using the product and contains a description about each
component part and its function as well as menu or network settings.
You have to keep in mind the following notices :
• SAMSUNG retains the copyright on this manual.
• This manual cannot be copied without SAMSUNG’s prior written approval.
• We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of
instructions mentioned in this manual.
• Prior to opening the case, please consult a qualified technician first. Whenever this is needed power must be
removed from the unit.
• Before installing additional HDD or connecting the SATA device to this product, check if it is compatible with the
product.
Warning
Battery
It is essential that when changing the battery in the unit, the replacement battery must be of the same type
otherwise there may be a possibility of an explosion.
The following are the specifications of the battery you are using now.
• Normal voltage : 3V
• Normal capacity : 220mAh
• Discharge Current : 0.2mA
• Operating temperature : -20°C ~ +85°C
(-4°F ~ +185°F)
Caution
• Connect the power cord into a grounded outlet.
• The Mains plug is used as a disconnect device and shall stay readily operable at any time.
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries According to the
Instructions.
System Shutdown
Turning off the power while the product is in operation, or undertaking improper actions may cause damage
or malfunction to the hard drive or the product.
To safely cut off power, press the front Power button on the product to display the confirmation message.
Click < > and then unplug the power cable.OK
You may want to install a UPS system for safe operation in order to prevent damage caused by an
unexpected power stoppage. (Any questions concerning UPS, consult your UPS retailer.)
6_ overview
overview
ConTenTS
overview
3
3 Important Safety Instructions
4 Before Start
6 Contents
8 Features
10 Part Names and Functions (Front)
12 Part Names and Functions (Rear)
14 Remote Control
inSTALLATion
16
16 Checking the installation environment
17 Rack Installation
17 Installing The HDD
ConneCTing wiTh oTher deviCe
22
22 Connecting External Devices
25 Connecting the Network
Live
27
27 Getting Started
30 Live Screen Configuration
35 Live Mode
37 Spot Out
38 Zoom
38 Audio ON/OFF
38 Freeze
39 Event Monitoring
mAin menu
40
40 System Setup
50 Setting the Device
60 Setting the Recording
63 Setting the Event
66 Backup
68 Network Configuration
81 Controlling a PTZ device
8_ overview
overview
feATureS
The product compresses camera inputs from 8/16 channels with H.264 video codec, and supports simultaneous
recording and playback of 8/16-channel audio input to/from HDD.
These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video
and audio data.
• Provides a convenient User Interface
• 8/16 CH Composite Input Connectors
• Supports CIF(S)/2CIF(M)/4CIF(L) recording formats/WD1
• With the network specific codec, network transfer enabled regardless of the recording conditions
• Display of HDD information and status by using HDD SMART
• HDD overwrite function
• Mass storage backup through high-speed USB 2.0HDD
• Simultaneous Record and Playback of 8/16-channel video data
• Various Search Modes (Time, Event, Backup, POS, Motion Detection)
• Various Recording Modes (Manual, Event, Scheduled Recording)
• Alarm Interface
• Remote Monitoring function by Network Viewer, Smart Viewer and Mobile Viewer
• Supports coaxial protocols (SRD-873D/1653D/1673D only)
• Tampering Detection (SRD-873D/1653D/1673D only)
10_ overview
overview
pArT nAmeS And funCTionS (fronT)
Srd-854d/873d
Srd-1653d/1654d/1673d
Part Names Functions
aChannel Used to select channel numbers directly in the Live Mode, or numbers in the numeric input mode.
b
REC Starts or ends the recording.
& (/Step Rewind (&
) : Used for backward frame-by-frame search while in PAUSE.
Fast Rewind (() : Used for quick backward search while in Play. (2x-64x)
@Stop : Used to stop the playback.
+ #/Play/Pause : Used to pause or resume the screen.
) */Fast Forward ()) : Used for quick forward playback. (2x-64x)
Step Forward (
*) : Used for forward frame-by-frame search while in PAUSE.
cLED Indicator
REC : Lights on when recording is in progress.
HDD : Displays the normal access to HDD.
Upon access to HDD, LED repeats on and off.
ALARM : Lights on when an event occurs.
NETWORK : Displays both network connection and data transfer status.
POWER : Displays the power ON/OFF status.
USB
cb d e
g fhi
a
USB
cb d e
g fhi
a
English _11
OVERVIEW
Part Names Functions
d
Direction /
Select Button
Used to change a value or move the cursor up/down/left/right (▲▼_ +).
Selects a menu item or executes the selected menu.
Jog shuttle
When a scroll bar appears in each menu, acts as a scrolling.
In Play mode, - Jog : Pauses the playback and steps backward or forward.
- Shuttle : Fast playback forward or backward.
ePower Used to turn the DVR ON/OFF.
`Functions only if the button was held for 2 seconds.
fUSB Port 1 / 2 Connects the USB devices.
g
MODE Each time you press the button in Live mode, the screen mode will be switched in sequence.
Each time you press the button in play mode, the screen mode will be switched in sequence.
AUDIO Sets Audio ON/OFF.
ALARM Cancels the ALARM LED and the audible alarm when the alarm is going off, and to remove the icon.
MENU/'Either goes to the system menu screen or moves to the upper menu from the lower menu.
ENTER Runs selected menu function.
hCamera Control
ZOOM : Sets the screen to the p11-x2 digital zoom.
FREEZE : Runs the FREEZE function in the Live Mode.
BACKUP : Runs the BACKUP function.
SEARCH : Goes to the search screen.
iOPEN/CLOSE Used to open and close the DVR-RW disc tray.
Using the jog shuttle
`Jog starts from the right point and shuttle starts from the left point.
< Jog >
In play mode, DVR playback steps forward video by 1 frame. In play mode, DVR playback steps backward video by 1 frame.
< Shuttle >
In play mode, DVR plays fast forward. In play mode, DVR plays fast reverse.
12_ overview
overview
pArT nAmeS And funCTionS (reAr)
Srd-854d
Srd-873d
Srd-1654d
Srd-1653d/1673d
12345678
ALARM IN
NO CONNECT ION
G G
1
NO
CO M CO M CO M CO M
NC NO NO NO
2 3 4
ALARM OUT
G
+ -
TX
+ -
RX
ALARM
RESET
CH1 CH2
CH3 CH4
AUDIO OUT
AUDIO IN
AUDIO IN CH5 ~ CH8
VIDEO IN
VIDEO IN
CONSO LE HDMI eS ATA
VGA OU T
SERIAL
SPOT 28765
SPOT 14321
NET WORK
k h g
a b c
ij
d e f
1
NO
CO M CO M CO M CO M
NC NO NO NO
2 3 4
ALARM OUT
G
+ -
TX
+ -
RX
ALARM
RESET
CH1 CH2
CH3 CH4
AUDIO OUT
AUDIO IN
AUDIO IN CH5 ~ CH16
VIDEO IN
VIDEO IN
CONSO LE HDMI eS ATA
VGA OU T
SERIAL
SPOT 2161514131211109
8 SPOT 17654321
NET WORK
12345678 9
10 11 12 13 14 15 16
ALARM IN
G G G G
k h g
a b c
ij
d e f
12345678
ALARM IN
NO CONNECT ION
G G
1
NO
CO M CO M CO M CO M
NC NO NO NO
2 3 4
ALARM OUT
G
+ -
TX
+ -
RX
ALARM
RESET
CH1 CH2
CH3 CH4
AUDIO OUT
AUDIO IN
VIDEO IN
VIDEO IN
CONSO LE HDMI
VGA OU T
SERIAL
SPOT 28765
SPOT 14321
NET WORK
k h g
a b c
ij
e f
1
NO
CO M CO M CO M CO M
NC NO NO NO
2 3 4
ALARM OUT
G
+ -
TX
+ -
RX
ALARM
RESET
CH1 CH2
CH3 CH4
AUDIO OUT
AUDIO IN
VIDEO IN
VIDEO IN
CONSO LE HDMI
VGA OU T
SERIAL
SPOT 2161514131211109
8 SPOT 17654321
NET WORK
12345678 9
10 11 12 13 14 15 16
ALARM IN
G G G G
k h g
b c
ij
e fa
English _13
overview
Part Names Functions
aAUDIO IN Audio input signal port (RCA jack) and port for optional audio extension cable.
`Only SRD-873D/1653D/1673D is supported.
bALARM
-ALARM IN : Alarm Input port.
SRD-854D/873D : 1~8 CH
SRD-1653D/1654D/1673D : 1~16 CH
-ALARM RESET : Alarm Reset port.
-ALARM OUT 1~4 : Alarm Output port.
RS-485 Used for RS-485 communication. (TX+, TX-, RX+, RX-)
cHDMI HDMI connector port.
deSATA Ports used for external storage device connections.
`Only SRD-873D/1653D/1673D is supported.
eNETWORK NETWORK connector port.
fPower Power connection port.
gVIDEO OUT Composite Video Signal Output Port ( type connector).VGA
hSERIAL Serial port for connecting to a POS device.
iSPOT1/2 BNC type of output port for the Spot signal.
jVIDEO IN Video Signal Input Port (BNC type connector).
kAUDIO OUT Audio Signal Output Port (RCA jack).
M `[CONSOLE] is designed for the service repair purpose only.
English _15
OVERVIEW
Using the Numeric buttons
CHANNEL 1–9 Press each button between 1 to 9.
CHANNEL 10 Press the [+10] button first, then press the 0 button again within 3 seconds.
CHANNEL 11–16 Press the [+10] button first, then press any number between 1 to 6 within 3 seconds.
Changing the Remote Control ID
Remote controls ID and DVR’s ID should be matched for proper operation.
1. Press the [ID] button of the remote control and check the ID displayed on the DVR screen.
The factory default ID of the remote control is 00.
2. Enter 2 digits of your selection in order, while pressing the [ ] button of the remote controlID .
3. When ID input is done, press the [ID] button of the remote control again to check the setting.
M `If you want to change the remote control ID to 08: Press 0 and 8 in order while the [ ] button of the remote control is ID
pressed.
For changing the ID of remote device, refer ”. (Page to Remote Devices 56)
16_ installation
installation
Please take note of the followings before using this product.
• Do not use the product outdoor.
• Do not spill water or liquid in the connection part of the product.
• Do not impose the system to excessive shock or force.
• Do not pull out the power plug forcefully.
• Do not disassemble the product on your own.
• Do not exceed the rated input/output range.
• Use a certified power cord only.
• For the product with an input ground, use a grounded power plug.
CheCKing The inSTALLATion environmenT
This product is a top-notch security device that is equipped with a
high-capacity HDD and other key circuit boards.
When the temperature rises inside the product, the product may
breakdown and the product life be shortened. Please pay attention to
the following recommendations before installation.
When mounting the product on a rack, comply with the following instructions.
1. Please ensure that the rack inside is not sealed.
2. Please ensure the air is circulated through the inlet/outlet as shown in the picture.
3. If you pile up the prudcts or other rack-mount devices as shown in figure 2, secure
room for ventilation or install a vent.
4.
For natural air convection, place the inlet at the bottom of the rack and the outlet on top.
5. It is strongly recommended that a fan motor is installed at the inlet and the outlet for
air circulation. (Please fit a filter at the inlet to screen dust or foreign substances.)
6. Please maintain the temperature inside the rack or surrounding areas between 0°C
~ 40°C (32°F ~ 104°F) as shown in the figure 1.
Rack Mount Instructions - The following or similar rack-mount instructions are included
with the installation instructions :
A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment may be greater than room
ambient. Therefore, consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature (Tma) specified by
the manufacturer.
B) Reduced Air Flow - Installation of the equipment in a rack should be such that
the amount of air flow required for safe operation of the equipment is not
compromised.
C) Mechanical Loading - Mounting of the equipment in the rack should be such
that a hazardous condition is not achieved due to uneven mechanical loading.
D) Circuit Overloading - Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits
might have on overcurrent protection and supply wiring. Appropriate
consideration of equipment nameplate ratings should be used when addressing
this concern.
E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should
be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).
[Figure 1]
Temperature Unit: ºC
One Year: 24HR X 365 DAY =8,760 HR
Life (Unit: HOURS)
[Figure 2]
DVD RECORDER
DVD RECORDER
USB
DVD RECORDER
USB
DVD RECORDER
USB
DVD RECORDER
USB
DVD RECORDER
USB
DVD RECORDER
USB
DVD RECORDER
USB
DVD RECORDER
English _17
INSTALLATION
RACK INSTALLATION
Install the Bracket-Rack as shown in the figure, and then fasten the
screws on both sides (2 screws on each side).
`Fix the screws not to be loosened by vibrations.
Cautions when Installing in the Rack
To install multiple DVRs in the rack, make sure to separate the FOOT at the bottom of each DVR.
1. There are four FOOTs at the bottom of a DVR.
Press the projected parts at both-ends of each “FOOT
and turn it counterclockwise.
2. FOOT” is separated from the main body when it is turned
to the end of fastening groove.
INSTALLING THE HDD
Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product
damage.
Please consult your provider for further information on HDD installation since improper installation or settings may
damage the product.
`Make sure to unplug the power cord from the wall outlet before proceeding with the installation.
J `Cautions for data loss (HDD care)
Please pay attention so that the data inside the HDD is not damaged.
Before adding a HDD, please check the compatibility with this product.
HDD is vulnerable to malfunction due to its sensitive nature especially against shock when operating.
Please ensure that the HDD is free from such shock.
We are not liable for any damage to the HDD incurred by user’s carelessness or miss use.
`Cases might cause damage to HDD or recorded data
To minimize the risk of data loss from a damaged HDD, please backup data as often as possible.
If exposed to shock when disassembling or installing, data stored in the hard disk may be damaged.
A sudden power failure or turning off the product while in HDD operation may damage the hard disk drive.
HDD or files stored inside may be damaged if the main body is moved or impacted during the HDD operation.
<Separation> <Installation>


Produkt Specifikationer

Mærke: Samsung
Kategori: Overvågningskamera
Model: Techwin SRD-854D

Har du brug for hjælp?

Hvis du har brug for hjælp til Samsung Techwin SRD-854D stil et spørgsmål nedenfor, og andre brugere vil svare dig




Overvågningskamera Samsung Manualer

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer