Sana -Mill Manual

Sana Andet køkkenudstyr -Mill

Læs gratis den danske manual til Sana -Mill (2 sider) i kategorien Andet køkkenudstyr. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Sana -Mill, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Troubleshooting Cleaning the Mill

 If the motor w i l l not start.

Simply rotate the grain funnel to the coarse setting (counter-

clockwise direction) until the motor starts. Then adjust the stones

again to the desired setting.

 If the motor stalls during operation.

This generally stems from overheating due to improper usage – a

built-in thermal cut-off switch stops the motor to prevent serious

damage. Unplug the power cord and allow the mill to cool down

for a few minutes. Then you should be able to resume the milling. If

the problem recurs, then you need to troubleshoot the source: Is

the grain too moist? Are the millstones or the mill chamber

clogged? Is there a foreign object caught between the millstones?

Did you turn the mill on with the hopper full and the millstones at

the finest grind setting?

If the grain is too moist, then the millstones could be smeared and

clogged. In this case, the normal grinding becomes much more

quiet, and very little flour exits the flour spout. Simply adjust the

funnel to a coarser setting, and resume milling with an appropriate

grain. The millstones will clean themselves.

Whenever you grind at the coarse setting, the millstones and mill

chamber are cleaned automatically. If you do not plan to use your

mill for a longer period of time, such as during a vacation, we

recommend that you clean the millstones from all residue. Using a

household vacuum cleaner simplifies this task. Turn on the mill with

the millstones at the coarse setting. Hold the vacuum nozzle in front of

the flour spout.

If the millstones are smeared with an oily residue, you can clean

them by grinding a cup or so of wheat or rice at the medium setting

to remove all trace.

You can also remove the millstones to clean them with a brush.

However, it is very important whenever you handle the millstones or

the milling chamber, that you first unplug the power cord! Then,

remove the grain funnel by unscrewing it in the counter-clockwise

direction. You can then remove the millstones, and clean them with

a brush. In handling the millstones, take special care not to lose the

two small, steel springs located in the plastic housing of the lower

millstone.

Warranty

The manufacturer guarantees against material and fabrication

defects, stemming from the normal, intended operation of this grain

mill, for a period of 12 years, beginning from the date of purchase.

The flour spout and other breakable components are excluded

specifically from this warranty. This warranty is null and void if the

mill is forcefully misused or used improperly in any way.

Dealer Location

Operating

Instruction

Sana-Mill

Thank you!

…for choosing our Sana-Mill to assist you in managing

your whole grain kitchen. We take pride in having

steadily raised the bar in performance, design and

functionality of the household grain m i l over the last

twenty years. This quality appliance should offer you

years of excellent service. Before you use your mil,

however, please read the following instructions care-

Instructions for Operation

 Use only thoroughly cleaned grain, free of pebbles and other

foreign objects. Otherwise you could damage the millstones.

 Always use dry grain in your mill. You can recognize a

“

dry

”

grain by squeezing it between the back of a spoon and a hard

surface. If it cracks loudly, the grain is dry. If it flattens under

pressure, looking something like a rolled oat, then it is moist (or

oily). Rye grain needs to be stored at least six months following

harvest before grinding. Oily grains such as oats should not be

ground at the finest setting.

 Never grind popcorn in your Wolfgang mill. Only regular corn

varieties used for corn meal and polenta should be used.

 Your mill housing is made largely of solid wood. You can protect

and care for the housing by properly locating it away from heating

vents and other sources of heat and moisture, such as your stove.

The solid wood housing is an organic material subject to warping,

if exposed to significant changes in temperature and/or humidity.

 Use your mill only with alternating (AC) current. Make sure

that your household power supply matches the voltage specifica-

tions printed on the bottom of the mill.

 This mill is designed for normal household use, and is not

suitable for commercial use.

 Never leave your mill unattended in use. Keep small children

away from the mill at all times.

 When in use, place your mill on a solid and level surface, such as a

kitchen counter. The openings on the bottom side of the mill must

remain open and unobstructed to allow adequate ventilation.

Simple operational steps

 Plug in the power cord.

 Turn on the mill

’

s switch.

 Adjust the grind setting.

 Pour grain into hopper and begin to mill. Re-adjust grind

setting of meal/flour, if needed.

 When finished milling, turn off the mill

’

s switch and unplug

the power cord.

Adjusting the fineness of the milled product

To adjust the fineness of the flour or meal, simply rotate the hopper!

You can continually adjust the grind setting between coarse and fine.

To locate the finest setting, first turn on the mill, with the grain hop-

per empty, and rotate the hopper clockwise in the

“

fine

”

direction,

until you can just hear the millstones touch. Then rotate the hopper

back slightly in the counter-clockwise direction, to the point just

where the sound of the millstones

’

contact disappears. This is the clo-

sest space between the two millstones, and therefore the finest grind

setting. The scale below the hopper can help you remember this set-

ting. This point on the scale may vary slightly with changing tempe-

rature and humidity in your kitchen.

While grinding, you can rotate the hopper in either direction, in order

to produce a finer or coarser milled product. If the mill is turned off

and the hopper contains grain, do not adjust the setting to the fine

setting! This could jam remaining flour and grain between the

millstones, causing the motor to stall. First rotate the setting toward

the coarse setting, turn on the mill, and then readjust the setting as

desired.

Your Sana Mill at a glance

Mill Hopper Lid

Grain Hopper

Grind Setting Scale

Flour Spout

Power Switch

Technical Info

Grinding capacity

(wheat with 13% moisture content, ground

at fine setting)

Hopper capacity

(wheat)

Millstone material:

Millstone size, inches:

Electric motor size, watt:

Maximum noise level, db:

Weight:

Height:

Width:

Depth:

Maximum height of bowl:

at flour spout

Housing:

Warranty:

100 g per minute

850

corund/ceramic

(continuously adjustable)

85 mm

360

8kg

335 mm

152 mm

150 mm

Solid beechwood treated

with natural vegetable oils

12 years

fully.

Produkt Specifikationer

Mærke:	Sana
Kategori:	Andet køkkenudstyr
Model:	-Mill

Har du brug for hjælp?

Hvis du har brug for hjælp til Sana -Mill stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Andet køkkenudstyr Sana Manualer

Sana EUJ-702 Manual

18 August 2024

Sana -Mill Manual

18 August 2024

Andet køkkenudstyr Manualer

Nyeste Andet køkkenudstyr Manualer

Healthy Choice TG70 Manual

27 Januar 2025

Schweigen KLS-3131RS Manual

14 Januar 2025

Corbero CCSF45020BX Manual

11 Januar 2025

De Dietrich DCM1991X Manual

11 Januar 2025

Healthy Choice DF380 Manual

7 Januar 2025

Healthy Choice AFO330 Manual

7 Januar 2025

Healthy Choice POB400 Manual

7 Januar 2025

Healthy Choice AFW1040 Manual

7 Januar 2025

Healthy Choice POR400 Manual

7 Januar 2025

Starlyf Professional Slicer Manual

7 Januar 2025