Saro KEVIN Manual

Saro Vask KEVIN

Læs nedenfor 📖 manual på dansk for Saro KEVIN (2 sider) i kategorien Vask. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
info@saro.de
Installation Instructions
Hand Wash Basin
Model KEVIN
Order no. 353-1005
1. General Information
Read these installation instructions carefully as they contain important information for the
installation of the hand wash basin.
Should you pass the hand wash basin to a third party, these installation instructions
should be handed over.
As soon as you have unpacked the hand wash basin, check, whether everything is in a
faultless condition. Should anything be damaged, inform your dealer.
Dispose the packing material according to the local regulations. All the packaging items
(plastic bags, cardboard, polystyrene foam, nails, etc..) should not be left within reach of
children, because they are potential sources of danger.
The manufacturer/dealer cannot be made responsible for damages, which arise through
not observing these installation instructions.
2. Installation
The installation should be only installed by a qualied specialist according to the valid
standards.
Remove all protection and packing materials.
Check the hand wash basin for any damages. If something is damaged, inform your
dealer.
Assembly of the hand wash basin
a) Install the siphon at the basin discharge.
b) Put the swan neck/water discharge into the hole, which is located above the right
basin edge.
c) Screw the exible hose (under the basin edge) on the swan neck.
d) Fix the basin with the attached support and the screws in horizontal position on the
wall.
e) Pull the exible hose over the crossbar in the forward position.
f) Screw the valve to the hose and consider the direction of the water ow. On the valve
is for this specially an arrow (see fig. 1). If you do not consider it, the valve will not
close correctly.
g) Lead the valve into the drilling, which is in the crossbar, and lock the valve with the
lock nut.
h) If you need the mixing valve for cold/warm water mixture, then turn the mixer on the
pressure control valve.
i) The delivery contains a liquid soap dispenser, which you can fasten by using the
double-sided adhesive, attached on the rear wall. Please clean the rear wall before,
so that it is completely grease-free.
j) The connection to the house water pipe and also the discharge should be installed by
a plumber. The accessories for these are not encluded in the delivery.
Page 1


Produkt Specifikationer

Mærke: Saro
Kategori: Vask
Model: KEVIN

Har du brug for hjælp?

Hvis du har brug for hjælp til Saro KEVIN stil et spørgsmål nedenfor, og andre brugere vil svare dig