Seagate Lyve Mobile Padlock Manual

Seagate Ikke kategoriseret Lyve Mobile Padlock

Læs nedenfor 📖 manual på dansk for Seagate Lyve Mobile Padlock (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
For details on managing security for
Lyve Mobile devices, go to
www.seagate.com/lyve-security.
1Connect power
Views
A Place the adapter plug for your location into the channel
on the power supply. Slide it down to lock it in place.
B Connect the power adapter to a live power outlet.
C Connect the power cable to the power port on the side
of Padlock.
Front
Side
Mounting installation
Mounting options include:
DIN-mount
VESA-mount
Wall-mount
Visit www.onlogic.com for mounting accessories and
instructions for safe use and installation.
Parts list
Lyve Mobile Padlock
DC-in
power jack
LED
USB 2.0 port Power button
USB 3.0 ports
LAN2 connector (RJ45) /
DHCP server
LAN1 connector (RJ45) /
DHCP client
Power adapter (12V, 3A)
US
EU
UK
AU/NZ
C
A
B
Front
Side
Top
Recommended clearance zones RequirementsConnection types
82 mm
115 mm
125 mm
92 mm
34 mm
82 mm
92 mm
34 mm
44 mm
115 mm
125 mm
44 mm
USB external drive with Lyve token file
Lyve Mobile Padlock lets you unlock Lyve Mobile Arrays using
an encrypted Lyve token file stored on a USB external drive. A
product admin must provide you with a token file authorizing
your Padlock to access Lyve Mobile devices.
Copy the Lyve token file to an external storage device capable
of connecting via a USB Type A connector. The Lyve token file
must be copied to the root level of the USB storage device to be
detected by Lyve Mobile Padlock.
Direct connection
Padlocks LAN2 (DHCP server) port can be directly connected to an
Ethernet port on PCIe Adapter or Rackmount Receiver. Padlock
can unlock only one device connected to the Ethernet port.
PCIe Adapter Padlock
Rackmount Receiver Padlock
Padlock
Network connection
In network environments, PCIe Adapter and Rackmount Receiver
Ethernet ports are connected to a network switch. Padlock’s
LAN1 (DHCP client) port can be connected to the same network
switch to communicate with the devices.
Important: The network must provide DHCP addressing.
Lyve Mobile Array User Manual
www.seagate.com/lyve-mobile-array
Lyve Mobile PCIe Adapter User Manuals
www.seagate.com/pcie-adapter
www.seagate.com/pcie-adapter-front-loader
Lyve Mobile Rackmount Receiver User Manual
www.seagate.com/rackmount-receiver
External storage device is not included with Lyve Mobile
Padlock. Most drive formats are supported APFS except
and ReFS.
Connect Lyve Mobile Array
Before configuring Lyve Mobile Padlock to automatically unlock
a Lyve Mobile Array, you must set up Lyve Mobile Array with
your host device. Make certain to make all physical connections
to the relevant ports.
Lyve Mobile Padlock unlocks Lyve Mobile Arrays using the
following interfaces:
PCIe Adapter in Lyve Mobile Mount
Fibre Channel or SAS via Lyve Mobile Rackmount Receiver
Padlock does not support iSCSI connected devices.
Shown above: Padlock connected to Slot B’s Ethernet port. If Lyve Mobile
Array is in Slot A, connect the Ethernet cable to Slot As Ethernet port.
Unidentified ports are intentionally disabled.
If Lyve Mobile Padlock does not turn on automatically
upon connection to a live outlet, press the power button.
204594000
Connect external USB drive
to Padlock
2
Connect the external USB drive containing a Lyve token file
to one of the USB 3.0 ports on the front of Padlock.


Produkt Specifikationer

Mærke: Seagate
Kategori: Ikke kategoriseret
Model: Lyve Mobile Padlock

Har du brug for hjælp?

Hvis du har brug for hjælp til Seagate Lyve Mobile Padlock stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Seagate Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024