Selfsat Snipe Air Manual

Selfsat Modtager Snipe Air

Læs nedenfor 📖 manual på dansk for Selfsat Snipe Air (88 sider) i kategorien Modtager. Denne guide var nyttig for 18 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/88

Contents

1. General Information

.............................................................................................

...............................................................................

.............................................................................................

1-1. Introduction

1-2. Proper use and operation

1-3. Safety notes

2. Contents

.......................................................................................

...........................................................................................

2-1. Accessory included

2-2. Name of parts

..............................................................................................

...........................................................................................

8-1. Dimension

8-2. Specications

9. Caravan / Motorhome Installation

............................................................................

..............................................................................

9-1. Required space for SNIPE Air

9-2. Equipment for installation

9-3. Instruction for installation

3. Operating Instruction

....................................................................................

..................................................................................

.........................................................................................

3-1. Connection diagram

3-2. Functional description

3-3. Quick reference

...................................................................

...................................................................................

6-1. How to set Wi-Fi network on devices

6-2. Conguration of the router via web

6-3. SAT>IP client setting

4. Software Upgrade

5. Advanced Settings

6. Preparation of broadcasting on SAT>IP clients

................................................................................

...............................................................................

7. Trouble Shooting

8. Specications

................................................................................ 15

ENGLISH - 2

1. General Information

1-1. Introduction

These instructions describe the functions and operation of SNIPE Air, auto skew satellite system.

Correct and safe operation of the system can only be ensured by following instruction, both for

installation and operation.

SNIPE Air is an intelligent satellite-TV reception system which can align itself towards a preset

satellite automatically as long as the system is located within the footprint of the selected

satellite.

SNIPE Air only occupies requisite space while it performs the necessary adjustments with slim and

agile antenna body.

For general operation, please ensure that the system always has a clear view to the sky. In Europe,

all satellites are in an approximate position in the south. If the satellite‘s signal beam is

interrupted by obstacles such as mountains, buildings or trees, the unit will not function and no

TV signal will be received. For more information on general use of this unit consult local dealer for

assistance.

Also, it is equipped with SAT>IP LNB and 802.11AC router, which enables user to use up to 8

dierent mobile devices simultaneously to watch satellite broadcasting channels.

This SNIPE Air is designed with most state-of-the-art technology, taking part of the worldwide

trend set.

For more information on general use of this unit consult local dealer for assistance.

ENGLISH - 3

It is not possible to add or remove components on this product.

The use of other components other than those originally supplied is not permitted.

To complete installation, installer must strictly follow instruction in the supplied user manual.

Failure to follow the user manual may cause damage to the unit or user's vehicle.

The product does not require any regular maintenance; all service must be carried out at

approved service centers.

All relevant guidelines of the automotive industry must be observed and complied with.

The equipment must only be installed on solid vehicle roofs.

Avoid cleaning user's vehicle with the mounted satellite system in a drive-through car wash or

a car wash with a high-pressure cleaner.

•

Please also note the following instructions from the manufacturer :

1-2. Proper use and operation

This product has been designed for portable use and xed installation on vehicles with

maximum speeds of 130 km/h. The unit is programmed to automatically aims at geostationary

television satellites.

The power is supplied by a standard vehicle electrical system with a rated voltage of 12 or 24

Volts DC. For installations on the vehicle, use power input cable (cigarette lighter cable) to

supply power. For portable use, optional power adaptor produced by SNIPE Air manufacturer

must be used.

Use of the equipment for any other purpose to the one specied is not permitted.

1-3. Safety notes

Please carefully read and follow the operating instructions in this manual and use the

SNIPE Air for its intended purpose.

Upon installation of SNIPE Air, please ensure the installation is done with supplied cables

and ensure the cables are not modied in any way.

As the user of this equipment, be responsible for ensuring compliance with the relevant

laws and regulations.

The manufacturer does not take liability for direct or indirect consequential damage of

the system, motor vehicles or other equipment by reason of unsuitable battery usage or

erroneous installation or wrong wire connection.

ENGLISH - 4

2. Contents

2-1. Accessory included

Power adaptor has to be purchased separate. Please ask to local dealer/shop for

more information.

Only power adaptor produced by SNIPE series manufacturer is guaranteed and

has be used.

Actual components may dier from the above images.

The unit enables to have power from car battery. To make power input cable for

direct connection, cut o cigarette lighter adaptor and peel o to take copper

cables out.

※

Main unit Mounting plate

Cable glandCarrying case Cable holder

Cigarette lighter adaptor

Receiver cable -12m , Grey

M6 × 15(8) ,

M4 16(2) , M4 × ×20(10)

User manual

Allen wrench Power adaptor

(Optional)

Manual

Controller / Wi-Fi antenna(4) Controller bracket Controller cable - 12m , Black

SAT>IP LAN cable

Base pads

ENGLISH - 6

In order to watch the broadcast in Smart devices must be dedicated programs

or application.

Please visit http://Satip.info for more information.

NOTE

3. Operating Instruction

3-1. Connection diagram

Portable use

Attach four(4) base pads to the bottom of antenna base.

Cigarette lighter adaptor or Power input cable

Receiver cable

(Grey color)

Controller cable (Black color)

SAT>IP LAN cable

MAIN UNIT

RECEIVER

CONTROLLER

Use black controller cable to connect the antenna to the controller.

Controller cable looks similar to the receiver cable but has dierent color and

labeling. Please check the labels to use the correct cable for the job.

Please ensure the cables that are supplied are used and not modied in anyway.

ENGLISH - 7

POWER , Arrows , OK button

LCD screen

LAN LED

SAT>IP LED

CPU LED

ROUTER PW LED

3-2. Functional description

Please mind that the Wi-Fi antenna should not be placed behind or underneath of metal material to ensure its

performance.

NOTE

Get ready four (4) of Wi-Fi antennas to assemble to the controller.

Check the printed Wi-Fi range, 5G or 2.4G, at the bottom of antenna and on the top side of the

controller to match.

Put and spin of each antenna to assemble the controller.

Hold the bottom of each antenna and spin tight till the end for ﬁrm assembly.

Assemble controller Wi-Fi antenna

HOME LED

Communication LED

NID check LED

Error message LED

GPS LED

Hold the very bottom of antenna and spin tight

HOME , MODE , ROUTER , TUNE button

ENGLISH - 8

HOME position is when the antenna completely folded down and facing forward.

NOTE

When the all cable connections are completed, press POWER to turn the unit on.

HOME LED will be solid this means the antenna is ready to go.

If the antenna did not go back to HOME position, HOME LED will continue to ﬂash while antenna

comes back to HOME. When the unit is ready, the default satellite “ASTRA1” or the last selected

satellite will be shown on LCD screen of the controller.

Communication LED will be solid when the unit is turned on.

(This light means antenna unit is communicating with controller correctly.)

ROUTER PW LED will be solid on since the unit is turned on.

(This light means embedded router is ON)

CPU LED will ﬂash since the unit is turned on.

(This light means embedded router is working properly.)

SAT>IP LED will ﬂash temporarily to check operational channel when SAT>IP server is turned on.

(This light will ﬂash again when SAT>IP server is in actual operation streaming data out to smart

devices.)

GPS LED ﬂashes while searching for the current location. When GPS position is conﬁrmed the LED

will become solid.

Waiting until both HOME & GPS LED’s are solid is recommended as this will allow the unit to ﬁnd the

selected satellite faster with more precise alignment accuracy.

If the searching operation starts before GPS becomes solid GPS LED will continue to ﬂash even when

the satellite is already locked. In this case, the unit may readjust skew once its current location is

conﬁrmed.

1. Get ready to use

2. Selecting the satellite

Select the satellite which user wants to view using arrow buttons on the controller and press OK.

Network Identiﬁcation (NID) check LED will ﬂash and the antenna status will display “SEARCHING” and

then “CHECKING” on LCD screen.

NID check LED will be solid once the satellite is found and then “SAT FOUND” will appear on LCD.

If wrong satellite is selected, move to the correct satellite name using arrows and press OK to conﬁrm

new satellite.

ENGLISH - 9

3. Back to HOME position & Turning o

After use and before travelling, press HOME to return the unit back to HOME position.

To fully turn oﬀ the unit, press and hold POWER for 5 seconds when the unit is at HOME position.

If user stays in a location for an extended period or wish to save power user can leave the unit up by

simply turning oﬀ the unit by ROUTER button on the left side of controller. ROUTER PW LED will be oﬀ

but signal stills comes through.

FINE TUNE mode can be initialized when a selected satellite is found and user wants to increase the signal

strength further.

4. Special function 1 : FINE TUNE mode

Press TUNE to start FINE TUNE mode.

First TUNE is for AZ (Azimuth). Adjust antenna position using arrow buttons to ﬁnd a new position

providing better signal quality and press OK to set. The signal level will be displayed on the controller

(Q ___ ) or satellite receiver.

Repeat the same process of adjust the EL (Elevation) and SK (LNB skew).

To save new position of the satellite and exit, press TUNE button. Saved new position will be placed

in the memory for the next turn on. But once vehicle moves or conﬁrms new GPS location, the saved

position will be reset.

Error message LED will be illuminated and the error message detail will be shown on LCD display, this will

detail if there is a problem with main unit.

5. Special function 2 : ERROR MESSAGE

HOME POSITION error

If antenna does not come back to HOME position within the allowed time or the system does not

recognise HOME position despite the antenna being back at HOME position (The Limit sensor is

faulty).

ii. TUNNER error

If there is no response when searching the satellite due to a faulty tuner or its settings.

iii. MOVEMENT error

If the PRO MAX cannot move to correct position for some reason.

iv. COMMUNICATION error

If connection is lost between the unit and controller that lasts longer than 5 seconds.

ENGLISH - 10

The unit will be automatically folded back to HOME position if vehicle

moves faster than 25km/h when the unit is powered.

NOTE

3-3. Quick reference

When user physically moves the unit, the unit must be returned to HOME

position to prevent damage.

WARNING

TEST mode can be initialised when either an error message is shown or the antenna is at HOME position.

6. Special function 3 : TEST mode

Press MODE once to enter TEST mode and press OK.

Go to the available functions on LCD using the arrow buttons and press OK to select.

To exit, press MODE and unit will return to previous status.

User are able to watch SAT>IP broadcasting channels on IP client or laptop by hard wired connection of LAN

cable to Ex LAN port on the left side of the controller. If Ex LAN port is in use, LAN LED on the right side of

controller will be solid on. (Extra LAN cable is not included in the package.)

7. Special function 4 : Ex LAN port

Press POWER to turn on the unit and select a satellite using arrow buttons and press OK.

Wait until “SAT FOUND” is displayed on LCD and NID check LED(second LED on the left side)

becomes solid.

Now, the selected satellite has been locked and the TV channels will be shown on smart

devices and TV.

ENGLISH - 11

USB

Cigarette lighter adaptor or Power input cable

4. Software Upgrade

USB 2.0 standard has to be only used for upgrade

NOTE

Transfer software program to a USB root folder (not belonging to any other folder) in an empty USB.

ii.

Ensure that the unit is turned oﬀ and plug the USB into USB port on the side of controller.

Press and hold TUNE button then also press the POWER button.

Unit will turn on and “USB connected, F/W Update mode” will be shown on LCD.

Once “UPGRADE FINISHED” is shown, update is completed, remove the USB device.

Please go to website www.selfsat.com to download update program (software).

In case a controller does not recognize the USB drive, take the USB out and plug into a PC.

Right click USB folder, go to “Properties” and check if the “File system” is FAT32.

If not, right click USB folder again, go to “Format” and re-setup a ﬁle system to FAT32.

CONTROLLER

ENGLISH - 12

5. Advanced Settings

To select and set numbers, use arrow buttons to see available options. The numbers adjust individually with the

cursor and press OK to move to next option. This function is only used if the satellite operator changes all its

parameters.

NOTE

Modify Transponder (TP) mode

i. Press MODE twice to enter “Modify TP mode” and press OK.

ii.

iii.

iv.

vi.

vii.

viii.

ix.

Select the satellite to be modiﬁed, as example “00 XXXX(satellite name) ~ 11 XXXX” and press OK..

Select TP number among “00~02” and press OK. (Three TP’s are programmed for each satellite)

Repeat the same process by inputting data for NID (Network identity), FREQ (frequency) and

SYMBOL (symbol rate).

Select type of signal DVBS or DVBS2 and press OK.

Select polarization VER (vertical) or HOR (horizontal) and press OK.

Select YES or NO to save and/or go back to ﬁrst stage of TP Modify.

To exit, press MODE and the unit will return to previous status.

For manual TP data RESET, press MODE to enter TEST mode and press OK. Go to “TP RESET” and

press OK among available functions on LCD using arrow buttons.

Restart the unit to apply the reset to next start up.

ENGLISH - 15

There are a number of common issues that can aect the signal reception quality or the

operation of the unit. The following sections address these issues and potential

solutions.

7. Trouble Shooting

Connection between the power and controller.

Connection between the controller and antenna. Make sure that the left port of the antenna should be

connected to the controller.

Check if the power input cable has been damaged.

Check the battery polarities (+/-).

ii.

iii.

Select another satellite as example Astra3, if this locks then select your desired satellite. ie

Astra1.

Turn the unit o and then back on again and select desired satellite.

ii.

iii.

A. No function when power on the controller

Check again all the cable connections have been made correctly.

C. Mechanical problems

Try to power OFF/ON again.

If the antenna does not move into desired position.

ii.

Try to power OFF/ON again. If problem persists, please contact local dealer/shop for assistance.

If the antenna makes a noise whilst remaining status.

B. Fail to search the selected satellite

Satellite signals can be blocked or degraded by buildings, trees.

Make sure there are no obstructions in a southward direction.

ii.

iii.

E. Not able to watch SAT>IP broadcasting channels on users devices

Make sure that the unit is locked the satellite correctly.

Check Wi-Fi connection between the unit and users’ devices.

Make sure that SAT>IP clients such as mobile app, IP STB, IPTV, etc., works properly.

D. Other issues

If the system has been improperly wired, it will not operate properly. Contact local

dealer/shop for assistance of cable damage.

ENGLISH - 16

8. Specications

8-1. Dimension

Input Satellite Frequency

Polarization

Antenna Gain

Size ( W x D x H )

Weight

Min EIRP

Angle Range (Elevation , Azimuth , Skew)

Satellite Searching Time

Output

LNB Output Frequency

L.O. Frequency

Operating Temperature

Input Voltage

Power Consumption

Wirelessly Operating Channels

Wireless connection

10.7 ~ 12.75 GHz

Vertical & Horizontal

33.7 dBi @ 12.7 GHz

515 × 355 × 201 mm

10.9 kg

50 dBW

15°~90°, 360°, -45°~+45°

120 seconds (AVG)

1 Legacy

950 ~ 2,150 MHz

9.75 / 10.6 GHz

-30 °C ~ +60 °C

DC 12 ~ 24 V

100 W (in searching)

8 channels at the same time

IEEE 802.11 AC compliance

454mm

515mm

316mm

355mm

MAX 426mm

MIN 201mm

126mm

201mm

8-2. Specications

a. Antenna

CPU

Flash / DRAM

Wired LAN Interface

Wireless LAN Interface

Frequency Band

Antenna

Operation / Storage Temp.

Operation / Storage Humidity.

Special Function

RTL8197DN + RTL8192ER + RTL8812AR

8MB (SPI Serial Nor Flash) / 8MB (SPI Serial Nor Flash)

10/100/1000 Base-T Port 2ea

2.4G : 802.11b/g/n (2T/2R) , MAX 300Mbps

5G : 802.11a/n/ac (2T/2R) , MAX 867Mbps

5 GHz/2.4 GHz (20 / 40 / 80 MHz Bandwidth Channel bonding)

2.4G : 4dBi Dipole 2ea MIMO Technology

5G : 5dBi Dipole 2ea MIMO Technology

0°C ~ 40°C (operating) / 0°C ~ 50°C (storage)

80% (operating) / 90% (storage)

P.S.E (Power Sourcing Equipment, supported 802.11at)

b. Router (Embedded in controller)

ENGLISH - 17

Please allow that there is enough space around SNIPE Air for at antenna section to

complete a full 360° scan of the sky and return to the HOME position.

9. Caravan / Motorhome Installation

9-1. Required space for SNIPE Air

Driving direction

Vehicle rear

B : Radius 32cm

up to a height 20.1cm

A : Radius 22.5cm

up to a height 12.9cm

Center of

the rotation unit

51.5cm

17.8cm

33.8cm

37.5cm

20.1cm

19.6cm

12.9cm

16.9cm

ENGLISH - 18

※ Mounting plate direction

Silicone

SAT>IP LAN cable

Receiver cables

Allen wrench

Controller bracket

Controller cable

Controller

Masking tape

M6 × 15(8) , M4 × 16(2) , M4 ×20(10)

Mounting plate

Cigarette lighter adaptor (Power input cable)

Cleaner

Power drill

2 mm drill bit, over 20 mm drill bit

Cable holder & gland

9-2. Equipment for installation

9-3. Instruction for installation

A. Mounting plate installation on a vehicle roof

Put aside the mounting plate to apply silicone

within the attached tape line but leave 2 cm

inward gap from the line

Attach masking tape outside of the mounting

plate by 5 mm away from the plate edges

A-4

A-2

FRONT

Clean the surface with cleaner

A-3

A-1

Locate mounting plate in the center of the

vehicle roof

Driving direction

ENGLISH - 19

B-3

B-1

Apply silicone on the holes

C. Apply silicone between mounting plate and masking tape

Remove masking tape and allow to dry

C-4

C-2

Apply silicone around mounting plate edges

C-3

C-1

Tidy silicone surface

Prepare to place the antenna on to the upright

bolts

B. Assemble 7pcs of M4x20 bolt to x the mounting plate

Assemble seven(7) of M4x20 screw Re-apply silicone to cover bolts assembled

B-4

B-2

Place the mounting plate on the silicone and

make 7 holes (2 mm) with a power drill

ENGLISH - 20

Make sure that hole size is minimum so that the

cable can pass through

E-2

Place cable holder 30 cm away from the rear center of the antenna. Apply masking tape 5 mm from

away the outside of holder

E-3

E-1

Drill a 20 mm hole in the center of the

tape marking

D-2D-1

D. Fix mounting plate with 8 pcs of M6x15 bolt using allen wrench

E. Cable holder installation 1

Place the antenna on mounting plate and

tighten rmly each bolt by allen wrench

Parts required, allen wrench and eight(8) of

M6×15 bolt

ENGLISH - 21

F-2

SAT>IP LAN cable, controller cable, receiver cable, cable holder and gland are required

Place the assembled cable holder inside the tape

marking and drill three(3) of 2 mm holes

Fix cable holder on the vehicle roof with

three(3) of M4 x 20 screws on drill holes made

F-4F-3

Apply silicone around cable holder and on the

top of screws for waterproof

Connect cables to the ports of the antenna ,

remove masking tape and tidy silicone before dry

F-6F-5

F-1

Set up required parts as above picture

F. Cable holder installation 2

ENGLISH - 22

The unit enables to have power from car battery. To make power input

cable for direct connection, cut o cigarette lighter adaptor and peel o to

take copper cables out.

NOTE

Connect power-controller-antenna using

cigarette lighter adaptor and controller cable

G-3

Get cigarette lighter adaptor (power input cable)

G-2

Place controller on xed bracket

G-4

G-1

Fix controller bracket where it should be xed using

two(2) of M4x16 screw

G. Controller installation

Inhaltsverzeichnis

1. Allgemeine Informationen

.....................................................................................

...................................................................

................................................................................

1-1. Produktvorstellung

1-2. Bestimmungsgemäße Verwendung

1-3. Sicherheitsanweisungen

2. Verpackungsinhalt

............................................................................................

........................................................................................

2-1. Lieferumfang

2-2. Teilebezeichnung

..........................................................................................

.......................................................................................

8-1. Abmessungen

8-2. Technische Daten

9. Wohnwagen / Wohnmobil Installations

..........................................................................

................................................................................................

9-1. Platzbedarf für die Installation

9-2. Ausrüstung für die Installation

9-3. Montage

3. Bedienungsanweisungen

....................................................................................

..................................................................................

...........................................................................................

3-1. Anschlussdiagramm

3-2. Funktionsbeschreibung

3-3. Kurzanleitung

........................................................

..........................................................

................................................................................

6-1. WLAN-Netzwerkeinstellungen auf den Geräten

6-2. Konguration des Routers über das Internet

6-3. SAT>IP-Client einrichten

4. Program-Upgrade

5. Erweiterte Einstellungen

6. Vorbereitung für die Übertragung auf SAT>IP-Clients

................................................................................

.....................................................................

7. Störungsbehebung

8. Technische Daten

............................................................................. 15

GERMAN - 2

1. Allgemeine Informationen

1-1. Produktvorstellung

Die Betriebsanleitung beschreibt die Funktion und Bedienung des automatischen, selbstnach-

führenden Satelliten-Systems SNIPE Air.

Der korrekte und sichere Betrieb des Systems ist nur gewährleistet, wenn die folgenden

Anweisungen für Installation und Betrieb befolgt werden.

SNIPE Air ist ein intelligentes Satellitenempfangssystem, das sich automatisch auf die

gespeicherten Satelliten ausrichten kann, sofern es sich in der Ausleuchtzone bendet.

Da die Nachführfunktion mit einer schlanken und agilen Antenne durchgeführt wird, weist SNIPE

Air einen geringen Platzbedarf auf.

Für den allgemeinen Betrieb, stellen Sie bitte sicher, dass das System immer eine klare Sicht auf

den Himmel. Wenn der Satelliten-Signal-Strahl durch Hindernisse wie Berge, Gebäude oder

Bäume unterbrochen wird, wird das Gerät nicht funktionieren und kein TV-Signal empfangen

werden.

Zudem ist es mit einem SAT>IP-LNB und einem 802.11AC-Router ausgestattet, der Ihnen

ermöglicht, bis zu 8 verschiedene mobile Geräte gleichzeitig zu benutzen, um Satellitenfern-

sehen zu empfangen.

Dieses SNIPE Air wurde mit der modernsten Technologie entwickelt und ist damit Teil eines

weltweiten Trends.

Für weitere Informationen zur allgemeinen Verwendung dieses Geräts wenden Sie sich an

örtlichen Händler.

Produkt Specifikationer

Mærke:	Selfsat
Kategori:	Modtager
Model:	Snipe Air

Har du brug for hjælp?

Hvis du har brug for hjælp til Selfsat Snipe Air stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Selfsat Manualer

Selfsat Snipe Dish 85 Manual

28 December 2024

Selfsat Snipe Dish 65 Manual

28 December 2024

Selfsat Snipe Dome Manual

25 August 2024

Selfsat Caravan Plus Manual

25 August 2024

Selfsat Snipe Mobil Camp Manual

25 August 2024

Selfsat Snipe Air Manual

25 August 2024

Selfsat Snipe Platinum Manual

25 August 2024

Modtager Manualer

Nyeste Modtager Manualer

QSC SPA-Qf 60x4 Manual

20 Marts 2025

Pearstone HBOX-4000 Manual

18 Marts 2025

Elipson WIIM Mini Manual

13 Marts 2025

Elipson Stream S300 Xi Manual

13 Marts 2025

Elipson A680 Manual

13 Marts 2025

Rexing RoadMate CPStream Manual

12 Marts 2025

Marshall Electronics VDA-108-3GS Manual

12 Marts 2025

KanexPro SP-1X16SL18G Manual

12 Marts 2025

MTX Audio Thunder TH400.4 Manual

11 Marts 2025

MTX Audio Thunder TH1400.5 Manual

11 Marts 2025