Selleys SolarFlex Clear Manual

Selleys Ikke kategoriseret SolarFlex Clear

Læs nedenfor 📖 manual på dansk for Selleys SolarFlex Clear (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Technical Data Sheet
Version 2.0
Updated 2 7/20209/
SELLEYS SOLARFLEX CLEAR
Page 1 of 2
WWW.SELLEYS.COM
All information contained in this Product Information Sheet is as accurate and up- -date as possible at the time of printing. Products can be expected to perform as indicated in this to
sheet, so long as application procedures and maintenance are followed as recommended. Any other warranties that may be implied are expressly excluded, except the consumer
guarantees under the Australian Consumer Law, where applicable, or any other non-excludable warranties under any State legislation, where applicable.
© 2020 DuluxGroup Pty Ltd; ABN 67 000 049 427
Head Oce 1 Gow Street, Padstow, NSW, 2211, Australia. T : 1300 555 205 (Aus); 0800 735 539 (NZ), Email support.selleysau@selleys.com el :
Description
Selleys SolarFlex™ High Performance
SMP Sealant Range is more durable than
conventional polyurethane sealants, even
in harsh weather conditions.
Product Information
Packaging
Size
Cartridge
300 grams
Uses
For sealing, bonding and lling
Suitable for wet or dry surfaces
For interior/exterior applications
Suitable for use on glass, metal, timber,
brick, concrete, tiles and most plastics#
Technical Features
Superior Weather & UV resistance
No primer required
Long lasting exibility
Adhesion to wet surfaces
Better extrudability (>5°C)
Better Curing (>5°C)
Indoor/outdoor
Paintable
Mould resistance
Non-bubbling
Non-slumping
Technical Details
Property
Typical Result
Technology
Moisture curing
silyl-modied
polymer (SMP)
Colour
Clear
Density
~1.05 g/mL
Application
Temperature
5 to 35°C
Tooling Time
(23°C, 50% R.H.)
~ minutes 25
Skin Time
(23°C, 50% R.H.)
45 to 55minutes
Cure Rate
(23°C, 50% R.H.)
2.5 to 3mm/24hrs
Slump
0mm
Tensile Strength
(DIN 53504)
1 ± 0.1MPa
Shore A
Hardness
25 ± 5
Elongation at
Break (DIN
53504)
~ 180%
Modulus at 100%
Elongation
(DIN 53504)
0.6 ± 0.1MPa
Movement
Capability
(ISO9046
modied)
± 20%
Service
Temperature
0 to 70 C ˚
VOC Content
~ g/L 35
Indicative data only, not intended for
preparation of specications
Approvals/Standards
Meets GBCA VOC limits for general
purpose and architectural sealants.
Complies with AS/NZS4020: Potable water
contact. Cured Sealant at Area to volume
ratios up to 2500mm2/L - tested at water
temperatures up to 40°C).
Surface Preparation
Ensure surface is clean, dry and free from
dust, grease, old or crumbling sealant.


Produkt Specifikationer

Mærke: Selleys
Kategori: Ikke kategoriseret
Model: SolarFlex Clear

Har du brug for hjælp?

Hvis du har brug for hjælp til Selleys SolarFlex Clear stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Selleys Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AOpen

AOpen AM1120T Manual

26 November 2024
AOpen

AOpen DE3125 Manual

26 November 2024
AOpen

AOpen DE5500 Manual

26 November 2024
AOpen

AOpen DT2462M Manual

26 November 2024
AOpen

AOpen DE3129 Manual

26 November 2024
AOpen

AOpen DE35-HD Manual

26 November 2024
AOpen

AOpen DE3650-S Manual

26 November 2024