Sennheiser PX 200W Manual

Sennheiser Hovedtelefon PX 200W

Læs nedenfor 📖 manual på dansk for Sennheiser PX 200W (1 sider) i kategorien Hovedtelefon. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Step 1

First slide the earcups upwards to make the

headphones as compact as possible.

Step 2

Holding the headphones with the left side

(marked L) in the left hand and the right side

(marked R) in the right hand, turn the earcups

inwards, away from you, thus “ﬂattening” the

headphones.

Step 3

Now fold the headphones inwards starting ﬁrst

with the left side followed then by the right

side.

Step 4

There’s a notch cut into the side of each head-

band. Match the notches up and lock them into

place. (If they don’t lock, you’ve probably fol-

ded the wrong side ﬁrst. Try again, starting

with the other side).

Step 5

To protect them safely when travelling, careful-

ly slip them into the case, headband ﬁrst, with

the ear pads facing down towards the black

underside of the case. Turn the case over, pull

the cable toggle up, curl the cable over the

plastic clip and wrap around the case. You’ll

ﬁnd a convenient alignment groove at the back

to help you. Don’t forget to tuck the plug secu-

rely in and then close the case.

Produkt Specifikationer

Mærke:	Sennheiser
Kategori:	Hovedtelefon
Model:	PX 200W
Vægt:	60 g
Produktfarve:	Hvid
Produkttype:	Hovedtelefoner
Impedens:	32 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Kabellængde:	1.4 m
Hovedtelefon frekvens:	10 - 21000 Hz
Hovedtelefon følsomhed:	115 dB
klirfaktor (THD):	0.1 %
Ørekobling:	Supraaural