Sevenoak SK-PSC1 Manual

Sevenoak Ikke kategoriseret SK-PSC1

Læs nedenfor 📖 manual på dansk for Sevenoak SK-PSC1 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1

● Please read and follow these instructions, and keep this manual in

a safe place.

● Handle the unit with care.

● Clean the unit with a soft, dry cloth.

● Use only parts provided by the manufacturer.

● Make sure everything is secure before proceeding.

● Make sure the item is intact and that there are no missing parts.

● Do not exceed the maximum load capacity.

● All photos are for illustrative purposes only.

Warnings

Step 2:

Insert your phone to the holder, press the cold shoe mount and

meanwhile turn the locking screw clockwise to lock the holder

tightly to ensure the phone is secured. It is ready to use now.

1. Mount an external microphone (with cold shoe mount) onto

the cold shoe mount on SK-PSC1, lock the microphone tightly.

Microphone is sold separately

Optional: Use SK-PSC1 with other accessories

Limited One-year Warranty

SK-PSC1

Smart Grip

2016 Sevenoak lnc.Visit us on the

web at www.sevenoak.biz

2016 Sevenoak lnc.Visit us on the

web at www.sevenoak.biz

Adjustable height for dierent phone sizes

Step 1:

Press the cold shoe mount, meanwhile turn the locking screw

counter clockwise till the height is suitable for your phone.

Start To Use:

Locking screw

57mm

97mm

67mm

1. Product over all height: 12.9cm

2. Max height of the phone holder part: 9.7cm

3. Min height of the phone holder part: 5.7cm

4. Made by plastic and aluminum

5. Net weight: 164g

Small, compact, easy to use and carry

Adjustable height

Holds your device tightly

An ultimate tool for serious smartphone photography

Compatible with virtually any smartphone model

Can be used as a Tripod Mount, Filmmaker Grip, and

Traveler Stand

Made for avid smartphone photographers, ﬁlmmakers,

journalists, sporters and travelers

Specifications:

Features:

Components:

1. Main Body

2. Hand strap

3. Hand grip

4. Bubble level

5. Cable ﬁx slot

6. Cold shoe mount

7. 1/4” screw thread

8. 1/4” screw thread

9. 1/4” screw thread

2. Mount SK-PSC1 to a tripod with the built in 1/4 screw

thread at the bottom of the hand grip.

Microphone is

sold separately Microphone is sold separately

Microphone is sold separately

Tripod is sold separately Tripod is sold separately

5. Mount LED light (with cold shoe mount ) onto the cold

shoe mount on SK-PSC1, lock the LED light tightly

LED light is sold separately

Remove the hand grip, SK-PSC1 can be used as a stand for your

phone which can be stand vertically or put down as shown in

the below picture.

Use SK-PSC1 as a stand

Sevenoak provides a limited warranty that this product is

free from defects in materials and workmanship to the

original purchaser under normal use for a period of one (1)

year from the original purchase date or thirty (30) days

after replaceme nt (the “Warranty Period”), whichever

occurs later. Our respon sibility with respect to this limited

warranty shall be limited solely to repair or replacement, at

its option, of any product which fails during normal

consumer use.

To obtain warranty coverage during the Warranty period,

contact your place of purchase (”Seller”) to obtain a return

merchandise authorization (”RMA”) number, and return to

Seller the defective product along with proof of purchase

and the RMA number.

This warranty does not extend to damage or failure which results

from misuse, neglect, accident, alternation,abuse, improper

installation or maintenance. Except as provided herein, sevenoak

makes neither any express warranties nor any implied warranties,

including but not limited to any implied warranty of merchantability

or ﬁtness for a particular purpose. This warranty provides you with

speciﬁc legal rights, and you may also have additional rights which

vary from state to state.

6. Remove the hand grip, SK-PSC1 can be mounted onto the

tripod with the built in 1/4” screw at the bottom of the

phone holder.

7. With 1/4” screw thread built at the back, SK-PSC1 can

be mounted onto other stands as shown in below ﬁgture

to use your phone to a take a short video or use it as a live

view monitor for your video shooting.

Shoulder rig or other

stands (sold separately)

Produkt Specifikationer

Mærke:	Sevenoak
Kategori:	Ikke kategoriseret
Model:	SK-PSC1
Type:	Aktiv holder
Højde:	129 mm
Vægt:	164 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Sammenfoldelig:	Ja
Materiale:	Aluminium, Plastic
Normal brug:	Hånd
Højdejustering:	Ja
Kapabilitet:	iPhone 6, 6 Plus, 6S, 6S Plus, 7, 7 Plus\nSamsung Galaxy, Sony Xperia, Nokia Lumia, Nexus
Indbygget oplader:	Ingen
Mobil enhedstype:	Mobiltelefon/Smartphone
Orientering:	Vandret
Beslagtype til enhed:	Klemmebeslag