Shadow SH 941 Manual


Læs nedenfor 📖 manual på dansk for Shadow SH 941 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Sensor
4. Locate the output socket in a convenient location on the instrument and attach with applied double sided adhesive4. Locate the output socket in a convenient location on the instrument and attach with applied double sided adhesive
1. Test fit sensors into the slot between the wing and foot.
Pickup should t tightly for best output (see g 1).
1. Test fit sensors into the slot between the wing and foot.
Pickup should t tightly for best output (see g 1).
2. If pickup is too loose, shim with included shim material (see fig 2). If pickup is too high, file the bridge slot slightly.2. If pickup is too loose, shim with included shim material (see fig 2). If pickup is too high, file the bridge slot slightly.
3. Install the sensors into the bridge slots.3. Install the sensors into the bridge slots.
5. Connect to appropriate amplifier with instrument cable.5. Connect to appropriate amplifier with instrument cable.
Copper Foil
Tape
Fax: (561) 743 0460
eMail: jjmelch@shadow-pickups.com
Shadow Elektroakustik
Peter-Haendel Straße 2
91334 Hemhofen · Germany
Shadow Electronics of America Inc.
17791 Alexander Run
Jupiter, FL 33478 U.S.A.
Fax: +49 - 91 95 - 92 99 30
eMail: info@shadow-electronics.com
Content:Content:
Fig. 2Fig. 2
Fig. 1Fig. 1
Violin Twin Bridge Pickup,
Cable holder,
Integrated Volume and tone control,
12 foot cable,
Copper Foil Tape
Violin Twin Bridge Pickup,
Cable holder,
Integrated Volume and tone control,
12 foot cable,
Copper Foil Tape
Installation Instruction for Shadow SH 941
Violin Twin Bridge Pickups
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we recommend
an amplier with low impedance input.
Note:
Piezo pickups and transducers have a very high output impedance. In order to get the optimum sound output we recommend
an amplier with low impedance input.


Produkt Specifikationer

Mærke: Shadow
Kategori: Ikke kategoriseret
Model: SH 941

Har du brug for hjælp?

Hvis du har brug for hjælp til Shadow SH 941 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Shadow Manualer

Shadow

Shadow SH 941 Manual

21 August 2024
Shadow

Shadow SH330 Manual

21 August 2024
Shadow

Shadow SH950 Manual

20 August 2024
Shadow

Shadow SH945 NFX-V Manual

19 August 2024
Shadow

Shadow SH3001 Manual

19 August 2024
Shadow

Shadow SH-SC1 Manual

19 August 2024
Shadow

Shadow SH965 NFX Manual

19 August 2024
Shadow

Shadow SH940 Manual

18 August 2024
Shadow

Shadow SH-SB1 Manual

18 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024