Shark Professional Steam Power Iron Manual
Læs nedenfor 📖 manual på dansk for Shark Professional Steam Power Iron (2 sider) i kategorien Jern. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
This manual covers model numbers:
GI405 55, GI405C 55
Euro-Pro Operating LLC
Newton, MA 02459
1-800-798-7398
COPYRIGHT© EURO-PRO OPERATING LLC 2013
PRINTED IN CHINA
Illustrations may differ from actual product.
Euro-Pro Shark and are trademarks of Euro-Pro Operating LLC.
BEFORE FIRST TIME USE
1 Before using your iron for the first time, please remove all the packaging material.
2 When you turn on the iron for the first time it might emit an odor for the first ten
minutes. This is because the materials used in making the iron are heating up. The
odor is safe and should not re-occur after the initial heating.
USING YOUR IRON
3 Pour water carefully into the water tank without going over
“MAX” line. Make sure the water inlet cover is closed to
avoid spilling while in use.
4 Plug in the iron into any 120V AC polarized
electrical outlet. The LED Indicator Light below the
Power on the Fabric Selector Dial will light up.
5 Set the desired ironing temperature by turning
the Fabric Selector Dial.
6 The LED Indicator Light above the selected temperature will flash and then will
become green once the selected temperature is reached. If you wish to change the
temperature, the LED Indicator Light will start to flash to show that the iron is either
heating up or cooling down. The LED Indicator Light will turn green again when the iron
reaches the selected temperature.
7 Press the Variable Steam Control Lever to select high or low steam setting. Select
“ ” on the steam lever for dry ironing. You can now start ironing.
8 Use the Steam Burst Button to remove stubborn wrinkles. Allow an interval of 3
seconds between each burst. Overuse of the steam burst may cause water spitting or
weak steam performance.
9 The Steam Burst feature also works in the vertical position. This is especially useful to
remove wrinkles from hanging clothes, delicate garments and other fabrics. Hold the
iron in the upright position several inches away from the article.
10 Use the Spray Button to dampen the fabric to tackle tough wrinkles, if necessary.
ANTI-DRIP FUNCTION
11 The Anti-Drip Function is built in to this iron. It prevents water spitting when the
temperature is too low.
12 Steam cannot be produced if the soleplate is not hot enough. It may result in water
spitting or leaking from the soleplate. The Anti-Drip Function reduces water dripping
and leaking when ironing at low temperatures.
ELECTRONIC MULTI POSITION AUTO-OFF
13 This iron is equipped with an electronic auto-off feature that switches the iron off if
it has been idle for 15 minutes in the upright position and after 30 seconds in the
sideways or flat positions.
14 The LED Indicator Light above the Auto-Off on the Fabric Selector Dial will flash in red
when the iron is in auto-off mode. To turn the iron back on, gently rock the iron back
and forth several times until the LED Indicator Light is re-illuminated. The iron might
have to warm up for a minute if the auto-off feature was activated for an extended
time.
SELF-CLEANING
15 Fill the water tank to the “MAX” level. Do not overfill.
16 Stand the iron on its heel, standing up on a protected surface and plug into the
electrical outlet.
17 Set the Fabric Selector Dial to “Linen/Cotton” setting. Wait until the light stops flashing.
The iron is now on the preset temperature.
18 Hold the iron horizontally over the sink. Press and hold the Variable Steam/Self Clean
Lever all the way down to the SELF CLEAN position.
19 Move the iron back and forth. Boiling water and steam will now be ejected from the
holes in the soleplate. Use caution when doing this as the water and the steam are hot
enough to cause burns.
20 Repeat step 19 until the impurities and scale are washed away.
21 Empty any excess water from the tank. Don’t touch the hot surfaces, water or steam
because injury may occur.
22 Release the steam lever and it will automatically go to “ ”.
23 Place the iron in upright position and let it cool down.
USEFUL TIPS
24 Read all garment care labels before you start ironing. You can also test the
temperature of the iron on a hem or an inside seam.
25 Iron similar fabrics together and in sequence of synthetic fibers nylon, silk/wool,
polyester, and cotton/linen. This will reduce the need to adjust the temperature
frequently.
TECHNICAL SPECIFICATIONS: 120 Volts, 60 Hz., 1600 Watts
IRONING GUIDE
FEATURES
STORAGE AND CARE
26 Always set the Variable Steam Control Lever to “ ” after you have emptied the water
tank.
27 Allow the iron to cool down before putting it away.
28 Place the iron in the upright position during heating up, cooling down and storage.
29 Avoid any sharp material contacting the soleplate.
30 Every two weeks, clean the exterior of the iron with a damp cloth and wipe dry.
31 If you use spray starch, wipe the soleplate occasionally with a soft, damp cloth to
prevent deposit build-up.
32 If the iron hasn’t been used in a few weeks, hold the iron horizontally and allow
steaming for 2 minutes before ironing.
ALWAYS REMEMBER
33 Turn the Fabric/Selector Dial to “Nylon” and then unplug the iron from the electrical
outlet before pouring water into the iron.
34 Always empty the water in the iron after each use.
35 Never iron or steam clothes while they are being worn.
36 Be very careful when filling the iron with water. Injuries may occur if the hot metal
parts, hot water or steam are contacted.
TROUBLE SHOOTING
This appliance has a polarized plug (one blade is wider than the other).
As a safety feature, this plug will fit into a polarized outlet only one way.
If the plug does not fit fully into the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
The iron doesn’t
heat up.
An odor is being
emitted from the
new iron or small
particles are
coming out.
Iron doesn’t
steam.
Water droplets
coming from
steam vents.
Iron should be plugged into a 120V AC electric outlet only.
Make sure the plug is securely in the socket.
Temperature setting might be too low.
Try turning to a higher setting.
Auto-off feature is activated.
This is normal.
Follow the instructions for first-time use and allow iron to steam
through 2-3 fillings and press the steam burst button occasionally
to eliminate small white particles.
Water tank may be empty or water level is very low. Add water.
Make sure the fabric setting and the Variable Steam Control Lever
are correctly set. For maximum steam, set the Variable Steam
Control Lever to “ ” and the temperature setting should be set
on “Linen/Cotton.”
Steam control is set on “ ”.
The soleplate is not hot enough and the anti-drip feature switches
off the steam. Always allow the iron to reach the selected
temperature with the Variable Steam Control Lever setting at “ ”.
For more steam, turn Fabric Selector Dial to a higher setting and
the steam control to “ ”
If the temperature setting and steam control settings are correct
and there is no steam, gently move the iron left or right a couple of
times. Move the Variable Steam Control Lever from “ ” to “ ”
a few times.
Variable Steam Control Lever may be set in “Self Clean” position.
Align the lever to the “ ” to “ ” steam setting.
Iron may not be hot enough. Set temperature to “Linen/Cotton”
position. Always allow iron sufficient time to heat up before
activating the variable steam control.
The Steam Burst may have been overused. Allow more time
between each burst.
SAVE THESE INSTRUCTIONS
ONE YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from material defects
and workmanship for a period of one (1) year from the date of purchase when
utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair
or replacement of the unit at our option. This warranty does not cover normal wear
of parts and does not apply to any unit that has been tampered with or used for
commercial purposes. This limited warranty does not cover damage caused by
misuse, abuse, negligent handling or damage due to faulty packaging or mishandling
in transit. This warranty does not cover damage or defects caused by or resulting
from damages from shipping or repairs, service or alteration to the product or any
of its parts, which have been performed by a repair person not authorized by
EURO-PRO Operating LLC.
If your appliance fails to operate properly while in use under normal household
conditions within the warranty period, you may return the complete appliance and
accessories with proof of purchase and date, freight prepaid. For customer service
support, call or visit our website at .1-800-798-7398 www.sharkclean.com
If the appliance is found by EURO-PRO Operating LLC to be defective, in EURO-PRO
Operating LLC’s sole discretion, we will repair or replace it free of charge. Proof of
purchase date and check made payable to EURO-PRO Operating LLC in the amount
of $12.95 to cover the cost of return shipping and handling must be included.
This warranty is extended to the original purchaser of the unit and excludes all
other legal, implied and/or conventional warranties. The responsibility of EURO-PRO
Operating LLC if any, is limited to the specific obligations expressly assumed by it
under the terms of this Limited Warranty. In no event is EURO-PRO Operating LLC
liable for incidental or consequential damages to anyone of any nature whatsoever.
Some states do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other
rights which vary from state to state or province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include
proof of purchase date and to attach a tag to item before packing including your
name, complete address and phone number with a note giving purchase information,
model number and what you believe is the problem with the item. We recommend
you insure the package (as damage in shipping is not covered by your warranty).
Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are
constantly striving to improve our products, therefore the specifications contained
herein are subject to change without notice.
CAUTION! TO PREVENT ELECTRIC SHOCK OR OTHER INJURY, before filling the iron with
water, make sure that the plug is removed from the outlet.
WARNING: Never fill the iron with fabric conditioner, starches or any other solution, as
these will damage the steam mechanism. Do not use contaminated water.
CAUTION! TO AVOID FIRE, never leave iron unattended while it is plugged in.
CAUTION! TO PREVENT ELECTRIC SHOCK, never use the iron in a location where it can
fall or be pulled into water or another liquid. If the iron falls into water or other liquid,
unplug it immediately. DO NOT reach into the water or liquid.
WARNING: Never use scouring pads, abrasive or chemical cleaners, or solvents to clean
the exterior or soleplate of your iron. Doing so will scratch and/or damage the surface.
CAUTION! DO NOT aim iron at face, towards yourself, or anyone else while using or
adjusting steam. Burns or serious injury may occur.
SPECIAL INSTRUCTIONS
1. To avoid a circuit overload, do not operate another high-wattage appliance on the same
circuit.
2. If an extension cord is absolutely necessary, use a 15-ampere cord. Cords rated for less
amperage can result in a risk of fire or electric shock due to overheating. Use care to
arrange the extension cord so it cannot be pulled or be tripped over.
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING YOUR IRON
When using your iron, basic safety precautions should always be followed,
including the following:
1. Use iron only for its intended use.
2. To protect against risk of electrical shock, do not immerse the iron in water or other
liquids.
3. DO NOT yank cord to disconnect from outlet. Grasp plug and pull to disconnect.
4. DO NOT allow cord to touch hot surfaces. Turn the Fabric Selector Dial to “Nylon”
before unplugging the iron. Let iron cool completely before putting away. Loop cord
loosely around iron when storing.
5. Always disconnect iron from electrical outlet when filling with water, emptying, or when
not in use.
6.
DO NOT operate iron with a damaged cord, or after the iron has been dropped or
damaged in any manner, or if it is leaking. To avoid the risk of electric shock, do not
disassemble the iron. Return to EURO-PRO Operating LLC for examination, repair, or
adjustment. Incorrect reassembly can cause the risk of electric shock when the iron is
used.
7. IMPORTANT: This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge.
Close Supervision is necessary for any appliance being used near children DO .
NOT leave iron unattended while connected or on an ironing board.
8. Burns can occur from touching hot metal parts, hot water, or steam. Use caution when
you turn a steam iron upside down; there may be hot water in the reservoir.
9. DO NOT use or stand the iron on an unstable surface.
10. While the iron is hot, never set iron on an unprotected surface - even if it is on its heel
rest.
11. Always store your iron standing upright, not on the soleplate. If stored face down, even
the smallest amount of moisture will cause the soleplate to corrode and stain.
12. This appliance is for household use only.
GI405series_55.E.F.130822.3
8
FABRIC TYPE
LABEL
INDICATION
TEMPERATURE
SELECTOR
STEAM
CONTROL
BURST OF
STEAM
SPRAY
Please note
that the symbol
above on the
l abel
of your garment
means that
THE ARTICLE
CANNOT BE
IRONED
NONO NO YES
YESYES YES YES
Nylon Wool/Silk Polyester Linen/Cotton
LOW MED. HIGHLOW - MED.
1 Stainless Steel Soleplate
2 Water Inlet Door
3 Spray Button
4 Water Level Window
5 Spray Nozzle
6 Variable Steam/Self-Clean
Control Lever
7 Steam Burst Button
8 Fabric Selector Dial
9 Pivot Cord
10 LED Indicator Light
11 Anti-Drip Function (not shown)
3
56
1
10
2
7
4
9
8
10
OWNER’S GUIDE
GI405 series
Produkt Specifikationer
| Mærke: | Shark |
| Kategori: | Jern |
| Model: | Professional Steam Power Iron |
Har du brug for hjælp?
Hvis du har brug for hjælp til Shark Professional Steam Power Iron stil et spørgsmål nedenfor, og andre brugere vil svare dig
Jern Shark Manualer
27 Juli 2024
Jern Manualer
- Jern DeLonghi
- Jern Sinbo
- Jern Bosch
- Jern SilverCrest
- Jern OBH Nordica
- Jern Sencor
- Jern Singer
- Jern Siemens
- Jern Breville
- Jern Panasonic
- Jern Gorenje
- Jern VOX
- Jern Miele
- Jern Philips
- Jern Concept
- Jern Vitek
- Jern LG
- Jern AEG
- Jern Electrolux
- Jern Elica
- Jern Braun
- Jern Hotpoint
- Jern Melissa
- Jern Hoover
- Jern Korona
- Jern Arçelik
- Jern ProfiCare
- Jern Grundig
- Jern Livoo
- Jern Klarstein
- Jern Tefal
- Jern Trisa
- Jern Princess
- Jern Emerio
- Jern Moulinex
- Jern Sunbeam
- Jern Westinghouse
- Jern Hyundai
- Jern Proctor Silex
- Jern Jura
- Jern Imetec
- Jern TriStar
- Jern Clas Ohlson
- Jern Adler
- Jern Black And Decker
- Jern Camry
- Jern Blaupunkt
- Jern Tomado
- Jern AEG-Electrolux
- Jern Becken
- Jern BEKO
- Jern Privileg
- Jern Alpina
- Jern Clatronic
- Jern Quigg
- Jern Hitachi
- Jern Rowenta
- Jern Fagor
- Jern Haier
- Jern AFK
- Jern Bomann
- Jern Morphy Richards
- Jern Russell Hobbs
- Jern Ariete
- Jern Innoliving
- Jern Maxim
- Jern Zelmer
- Jern Leifheit
- Jern Vivax
- Jern JML
- Jern Calor
- Jern Sunny
- Jern Telefunken
- Jern Primo
- Jern Orbegozo
- Jern Optimum
- Jern Taurus
- Jern Exquisit
- Jern Elba
- Jern MPM
- Jern Profilo
- Jern Tesla
- Jern G3 Ferrari
- Jern Domo
- Jern BEEM
- Jern GlobalTronics
- Jern Swann
- Jern Thomas
- Jern Hamilton Beach
- Jern Ambiano
- Jern Unold
- Jern Nevir
- Jern Ursus Trotter
- Jern Inventum
- Jern Cleanmaxx
- Jern Swan
- Jern Khind
- Jern Frigidaire
- Jern SVAN
- Jern Scarlett
- Jern Izzy
- Jern ECG
- Jern Nova
- Jern Saturn
- Jern Eldom
- Jern Maxwell
- Jern H.Koenig
- Jern Proline
- Jern Waves
- Jern Termozeta
- Jern Laurastar
- Jern Easy Home
- Jern Polti
- Jern Eta
- Jern Turmix
- Jern Orion
- Jern Rotel
- Jern Kalorik
- Jern Cecotec
- Jern Solac
- Jern CHI
- Jern Beper
- Jern Tower
- Jern Team
- Jern Jocca
- Jern Brentwood
- Jern Duronic
- Jern Bestron
- Jern Philco
- Jern Kunft
- Jern Arzum
- Jern LERAN
- Jern Conair
- Jern Hacienda
- Jern Andis
- Jern Oster
- Jern Jocel
- Jern Ufesa
- Jern DPM
- Jern Create
- Jern Flama
- Jern Kambrook
- Jern Jata
- Jern Aigostar
- Jern Heinner
- Jern Defy
- Jern First Austria
- Jern Drew & Cole
- Jern Qilive
- Jern Lümme
- Jern Johnson
- Jern Koblenz
- Jern Essentiel B
- Jern Gallet
- Jern Zephir
- Jern Superior
- Jern Grunkel
- Jern Coline
- Jern Elta
- Jern Imarflex
- Jern Lelit
- Jern Girmi
- Jern Zomix
- Jern Vanguard
- Jern Domena
- Jern Eudora
- Jern Elgento
- Jern High One
- Jern Lagrange
- Jern Robinhood
- Jern LAFE
- Jern Inno-Hit
- Jern Britania
- Jern Vaporella
- Jern Kleva
- Jern Steamfast
- Jern Michelini
Nyeste Jern Manualer
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024
21 December 2024